[chirp_users] Kenwood TH-K40E

[Ernesto Xload]

A lot of thanks Dan, I asked because I think that would be compatible with
other Kenwood model.

73

El mié., 8 may. 2019 a las 20:29, Dan Clemmensen (<danclemmensen at gmail.com>)
escribió:

> Please look at the CHIRP Home Page:
>     https://chirp.danplanet.com/projects/chirp/wiki/Home
> No, it's not supported. Also look at the FAQ (second FAQ question)
>    https://chirp.danplanet.com/projects/chirp/wiki/FAQ
>
> On Wed, May 8, 2019 at 11:21 AM Ernesto Xload <xload.es at gmail.com> wrote:
>
>> Hello,
>>
>> Is Chirp capable of programming Kenwood TH-K40E?
>>
>> Best Regards.
>>
>> Ernesto Xload
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Dan Clemmensen at danclemmensen at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ernesto Xload at xload.es at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190508/b7c934ef/attachment.html