[chirp_users] Programming Yaesu Radios using CHIRP

Angelo T Sonnesso asonnesso at gmail.com
Thu Mar 28 06:05:29 PDT 2019


Will Chirp support the Yaesu FT2600M?

 

73 N2DYN Angelo

 

From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Clemmensen
Sent: Thursday, March 28, 2019 12:17 AM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Programming Yaesu Radios using CHIRP

 

There are a lot of Yaesu radios, and not all of them use the same programming protocol. I'm only really familiar with the newer Yaesu HTs, namely the FT-4 and FT-65. The protocol for these radios controls the memory access fairly tightly, so accidentally writing into the wrong place is unlikely. You can access memory you are not supposed to by writing special software, but the CHIRP driver does not do this.  Older Yaesu radios use a much cruder protocol and it is theoretically possible to mess up and hit the wrong memory, but I don't personally have knowledge of this, we will need to see who else responds.

 

On Wed, Mar 27, 2019 at 9:06 PM Larry Lovell <larry.lovell76 at gmail.com <mailto:larry.lovell76 at gmail.com> > wrote:

Has anyone had a problem programming a Yaesu radio with CHIRP?

Someone mentioned that their Yaesu was damaged and had to be sent to the factory because CHIRP had overwritten some code controlling the processor.  It also had to be re-flashed.

Since I don't fully understand how CHIRP works this doesn't make sense to me, but knowing manufacturing companies, they may share Channel Memory with processor memory and not think much about it.

Thanks for your information.


 

-- 

Larry Lovell
73's N7RGW

http://QRVTronics.com
Cell: 214-697-1729

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com> 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dan Clemmensen at danclemmensen at gmail.com <mailto:danclemmensen at gmail.com> 
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com> 



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190328/fe41d26c/attachment-0002.html 


More information about the chirp_users mailing list