[chirp_users] Second Attempt cant program my radio

Larry Lovell larry.lovell76 at gmail.com
Wed Jun 5 21:04:45 PDT 2019


See if this helps:
https://www.qrvtronics.com/CatHAM_Radio/files/UsingCHIRPorOtherSoftware.pdf
Larry, N7RGW

On Wed, Jun 5, 2019 at 7:22 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Jun 5, 2019 at 8:59 PM Glenn At Home <glennervin at cableone.net>
> wrote:
> >
> > Which operating system are you using, and which com port/USB port did
> you select?
> >
> >
> > From: gearjam at ken-tennwireless.com
> > Sent: Wednesday, June 05, 2019 7:52 PM
> > To: chirp_users at intrepid.danplanet.com
> > Subject: [chirp_users] Second Attempt cant program my radio
> >
> > I bought $20.00 program cable from Amazon. Had to download driver CDM
> > v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read
> > data from radio" a small window opens that says "Read data from radio"
> > with three tabs, "Read", "Cancel" and "Help". When I click on Read I get
> > another small window that says "Operation Prompt" with the message "!
> > Fail connect with transceiver". When I click on Help nothing  happens.
> > Cable is firmly plugged into radio to the second click. Tried dampening
> > the pins for a better connection as per the Baofeng instructions. I've
> > also tried the radio on both channel mode and frequency mode. Checked
> > Miklor.com to no avail. I accidently keyed the PPT button and heard a
> > buzz from my computer speakers so I believe I have a connection with the
> > cable. Any advice???????
> > Steve Prime
>
> Hi Steve,
>
> You still don't have a working connection between the radio and
> computer. Follow the instructions on miklor.com to determine which
> device driver is install and which COM port number has been assigned
> to the programming cable and report back.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Larry Lovell at larry.lovell76 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>


-- 
Larry Lovell
73's N7RGW
http://QRVTronics.com <http://qrvtronics.com>
Cell: 214-697-1729
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190605/b7595f5c/attachment-0002.html 


More information about the chirp_users mailing list