[chirp_users] Transmit UV5r to FRS

[Gene McKnight]

Spencer, this is one of many of these emails. This email will be followed by others.    Gene


    On Thursday, June 20, 2019, 11:02:57 PM CDT, D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:  
 
 We also do not want to be accomplices in the commission of a crime.
§95.335   Operation of non-certified transmitters prohibited.

https://www.ecfr.gov/cgi-bin/text-idx?SID=513d144496fe583b1100416953ca419f&mc=true&node=se47.5.95_1335&rgn=div8  

GMRS and FRS regulations have changed, but unlicensed FRS does not permit any radio that has a removable antenna.  Also radios have to be certified under FCC Part 95.  UV-5R isn't on the list, and FCC is planning on banning the import of any radio capable of being used on a frequency that the unit is not licensed for.  That is if it isn't an amateur radio, in the future any radio imported will only be able to be used on amateur radio frequencies.
Also in the near future, radios will not be legally allowed to be manufactured, imported , or sold that can be used on BOTH GMRS and FRS.  This is going to cause a problem for licensed amateur radio operators  who own such radios, like I do:
§95.1791   Sales of GMRS/FRS combination radios prohibited.

(a) Effective September 30, 2019, no person shall be permitted to manufacture or import, sell or offer for sale any radio equipment capable of operating under both this subpart (GMRS) and subpart B (FRS) of this chapter.

FRS allows 2 watts or less on channels 1 – 7 and the previously GMRS only channels of 15 – 22, but only 0.5 watts on channels 8 – 14.GMRS licensees can use up to 50 watts, but there are somewhat complicated restrictions and an FCC 10 year renewable license (good for entire family) is needed. GMRS licensees can also operate on 8 additional repeater frequencies.  
The regulations for GMRS are quite complicated. https://ecfr.io/Title-47/se47.5.95_11767
I think the past practice of this group not to provide such information to unlicensed persons is a wise one.
73David N1EA



On Thu, Jun 20, 2019 at 4:48 PM Glenn At Home <glennervin at cableone.net> wrote:

Let's not play police here.I do believe that the FCC has allowed some of the FRS frequencies, now up to 2 watts.To answer the question, make sure the same frequencies are in the column next to the receive column.I don't recall if they are labeled RX and TX or what.Glenn
From: John Wuest Sent: Thursday, June 20, 2019 3:42 PMTo: Discussion of CHIRP Subject: Re: [chirp_users] Transmit UV5r to FRS
Using your UV-5R on FRS frequencies will be a violation of Federal Law. That radio is not, nor can not be, type accepted for that service.
On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer at gmail.com> wrote:

   
I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp?
 
Thanks, in advance.
 
Todd
 
 
 
 
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John Wuest at jhwuest at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arboc60 at yahoo.com at arboc60 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190622/f6a3b4d2/attachment.html