[chirp_users] chirp_users Digest, Vol 126, Issue 7
jeff riddlebaugh
Sun Jun 9 12:22:56 PDT 2019
I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don’t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R.
Thanks
jeff
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of chirp_users-request at intrepid.danplanet.com <chirp_users-request at intrepid.danplanet.com>
Sent: Sunday, June 9, 2019 3:00:03 PM
To: chirp_users at intrepid.danplanet.com
Subject: chirp_users Digest, Vol 126, Issue 7
Send chirp_users mailing list submissions to
chirp_users at intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request at intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner at intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: UV-5R and volume. (JD Morrow)
2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF)
3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF)
4. Re: UV-5R and volume. (John Kemker)
5. Adding 2m and 70cm repeaters (David)
6. Re: Adding 2m and 70cm repeaters (Jim Unroe)
7. Re: Adding 2m and 70cm repeaters (David)
8. Re: Adding 2m and 70cm repeaters (Amnon Zohar)
9. BF888 Settings tab items not saved (Barry Jackson)
10. Yaesu ft-2dr programming cable (Rodney D. Myers)
----------------------------------------------------------------------
Message: 1
Date: Sat, 8 Jun 2019 16:16:55 -0400
From: "JD Morrow" <ngauge75 at verizon.net>
Subject: Re: [chirp_users] UV-5R and volume.
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4 at Laptop15>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
All,
Have been programming multiple (15+/-) UV-5's, for our group, for
several years. Never have had to mess with the volume. Versions of hardware
at the beginning was the worst. Cables and drivers, were a pain for a while
to, but not the radio controls.
73's JD
k2txv
-----Original Message-----
From: Jim Unroe
Sent: Saturday, June 8, 2019 1:22 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] UV-5R and volume.
On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich at cheerful.com>
wrote:
>
> Certainly the computer volume control has no influence but since the data
> is being communicated to/from the radio over the external radio audio
> port, the radio volume control needs to be set midrange for the cable to
> "hear" the outbound data.
>
> Don Goodrich
> don.goodrich at Cheerful.com
> AF7DG
The digital data is proviced on connections that have nothing to do
with the connections for the analog speaker audio or the analog
microphone audio. In addition to the audio wires (that aren't included
in the programming cable since they are not necessary to have for
programming) and the data wires, there is even a connection that
provides DC voltage (5V or 3.3V depending on the radio) to power
external devices.
http://www.miklor.com/COM/UV_Technical.php#spkrmic
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John at ngauge75 at verizon.net
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com
------------------------------
Message: 2
Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT)
From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
Subject: Re: [chirp_users] UV-5R and volume.
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Don
Goodrich <don.goodrich at cheerful.com>
Message-ID: <2139978547.224644.1560028246453 at email.ionos.com>
Content-Type: text/plain; charset="utf-8"
Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode.
> On 08 June 2019 at 12:48 Don Goodrich <don.goodrich at cheerful.com> wrote:
>
> Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data.
>
> Don Goodrich
> don.goodrich at Cheerful.com
> AF7DG
>
>
>
>
> Sent: Saturday, June 08, 2019 at 7:12 AM
> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>, "Dennis Wage" <dwage at dwage.com>
> Subject: Re: [chirp_users] UV-5R and volume.
>
> True. The setting of the volume control has NOTHING to do with programming.
>
> If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it.
>
>
>
> > > On 08 June 2019 at 06:54 Dennis Wage <dwage at dwage.com> wrote:
> >
> > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up.
> >
> > Let's once and for all dispel or confirm this.
> >
> > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable.
> >
> > Please confirm or deny.
> >
> > Thanks,
> >
> > Dennis M. Wage (W9BOQ)
> >
> > 245 Corum Hill Road
> > Castalian Springs, TN 37031
> > (615) 310-4242 Cell
> > (615) 562-5128 Home
> > http://hammondb3organ.net/
> > http://overdubs.net
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> >
> > >
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>
>
> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich at cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190608/db54afcc/attachment-0001.html
------------------------------
Message: 3
Date: Sat, 8 Jun 2019 17:11:55 -0400 (EDT)
From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
Subject: Re: [chirp_users] UV-5R and volume.
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Jim
Unroe <rock.unroe at gmail.com>
Message-ID: <456028971.224655.1560028315083 at email.ionos.com>
Content-Type: text/plain; charset="utf-8"
That says MAY NEED, not DOES NEED.
It means that the author didn't know.
> On 08 June 2019 at 13:05 Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>
>
> On Sat, Jun 8, 2019 at 12:43 PM Tom Consodine, ND5Y via chirp_users
> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
> >
>
> > > What directions?
> >
> > >
> > > Tom ND5Y
> >
> > > See attached screenshot...
>
> Jim KC9HI.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190608/0b75f26d/attachment-0001.html
------------------------------
Message: 4
Date: Sat, 8 Jun 2019 20:53:01 -0400
From: John Kemker <kemkerj3 at gmail.com>
Subject: Re: [chirp_users] UV-5R and volume.
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CA+r6kYQu-CNcRGVpdJ0AYbF1rtFhfUx+CxG8ft4bN4FRvORe0g at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
exactly
The data is serial data, which is not in the audio spectrum. There's no
"modem" on either end of the cable. It's straight RS-232C data as might
come out of the back of an older PC. Volume has nothing to do with it, as
it's either "on" or "off."
On Sat, Jun 8, 2019 at 5:11 PM Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net>
wrote:
> Data uses the same connector. It doesn't go through the radio's audio
> chain. Audio is disabled when in program mode.
>
> On 08 June 2019 at 12:48 Don Goodrich <don.goodrich at cheerful.com> wrote:
>
> Certainly the computer volume control has no influence but since the data
> is being communicated to/from the radio over the external radio audio port,
> the radio volume control needs to be set midrange for the cable to "hear"
> the outbound data.
>
> Don Goodrich
> don.goodrich at Cheerful.com
> AF7DG
>
>
> *Sent:* Saturday, June 08, 2019 at 7:12 AM
> *From:* "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
> *To:* "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>, "Dennis
> Wage" <dwage at dwage.com>
> *Subject:* Re: [chirp_users] UV-5R and volume.
>
> True. The setting of the volume control has NOTHING to do with programming.
>
> If you have to wait several minutes between plugging in the radio and
> downloading with Chirp then your Windows installation is broken. It's not
> Chirp causing it.
>
>
>
> On 08 June 2019 at 06:54 Dennis Wage <dwage at dwage.com> wrote:
>
> Pertaining to the UV-5R series of phones, I have seen numerous times that
> the volume needs to be turned up.
>
> Let's once and for all dispel or confirm this.
>
> I for one have found, and it makes total sense to me, that the volume has
> absolutely nothing to do with data being transferred to a computer with the
> data cable.
>
> Please confirm or deny.
>
> Thanks,
>
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937
> 825 5032
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
> http://www.ngunn.net
>
> _______________________________________________ chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
> was sent to Don Goodrich at don.goodrich at cheerful.com To unsubscribe,
> send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
> _______________________________________________ chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
> email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937
> 825 5032
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
> http://www.ngunn.net
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to W5NNH at kemkerj3 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
--
--John E Kemker III
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190608/eeeb5208/attachment-0001.html
------------------------------
Message: 5
Date: Sun, 9 Jun 2019 09:00:30 +0000
From: David <davidp.jackson at hotmail.co.uk>
Subject: [chirp_users] Adding 2m and 70cm repeaters
To: "chirp_users at intrepid.danplanet.com"
<chirp_users at intrepid.danplanet.com>
Message-ID:
<AM6PR0202MB332092D28A3E1532690A0893C3120 at AM6PR0202MB3320.eurprd02.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi everyone,
You guys were incredibly helpful recently in getting me started. I've now successfully uploaded marine VHF, 2m and 70cm simplex channels to my Baofeng UV-5R III, thanks again.
I'm now having a few problems in adding repeaters and I hope you can similarly help.
I have a CHIRP file for relevant UK repeaters. I'm guessing that they are from an older version of CHIRP as some of the column headings are different.
I'm manually entering the info. All ok except these. The (old) file of repeaters shows these columns: Tone. rToneFreq. cToneFreq. DtcsCode. DtcsPolarity. Tstep
I'm trying to enter:-
Tone, always Tone
rToneFreq, either 110.9, 82.5 or 103.5.
cToneFreq, always 88.5
DtcsCode, always 23
DtcsPolarity, always NN
My version of CHIRP isn't quite the same. Here are my issues.
In CHIRP, I populate Tone Mode to Tone. My next 2 columns are Tone and Tone Sql. I seem only able to enter one of these columns as when I enter the second it automatically changes the previous Tone Mode to another preset. Simialrly, the Tone Mode autochanges when I try to populate any of the DTCS Code, DTC Rx Code and Cross Mode.
Hopefully, I've explained the issue clearly. Any ideas what I'm doing wrong.
Thanks in advance
Kind regards
David
G4PYH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190609/2a8868da/attachment-0001.html
------------------------------
Message: 6
Date: Sun, 9 Jun 2019 06:20:33 -0400
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Adding 2m and 70cm repeaters
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CADnO8U5519MsQ8X1zE=MRTa-OPYmn0806_iT=z65GD5x09EYzA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
On Sun, Jun 9, 2019 at 5:02 AM David <davidp.jackson at hotmail.co.uk> wrote:
>
> Hi everyone,
>
> You guys were incredibly helpful recently in getting me started. I've now successfully uploaded marine VHF, 2m and 70cm simplex channels to my Baofeng UV-5R III, thanks again.
>
> I'm now having a few problems in adding repeaters and I hope you can similarly help.
>
> I have a CHIRP file for relevant UK repeaters. I'm guessing that they are from an older version of CHIRP as some of the column headings are different.
>
> I'm manually entering the info. All ok except these. The (old) file of repeaters shows these columns: Tone. rToneFreq. cToneFreq. DtcsCode. DtcsPolarity. Tstep
>
> I'm trying to enter:-
> Tone, always Tone
> rToneFreq, either 110.9, 82.5 or 103.5.
> cToneFreq, always 88.5
> DtcsCode, always 23
> DtcsPolarity, always NN
>
> My version of CHIRP isn't quite the same. Here are my issues.
>
> In CHIRP, I populate Tone Mode to Tone. My next 2 columns are Tone and Tone Sql. I seem only able to enter one of these columns as when I enter the second it automatically changes the previous Tone Mode to another preset. Simialrly, the Tone Mode autochanges when I try to populate any of the DTCS Code, DTC Rx Code and Cross Mode.
>
> Hopefully, I've explained the issue clearly. Any ideas what I'm doing wrong.
>
> Thanks in advance
>
> Kind regards
>
> David
> G4PYH
Hi David,
It appears that you may be looking at a CSV file. If it is a valid
CHIRP CSV file you should be able to "Import" it into a tab that is
compatible with your radio. An alternative would be to import file
into a "New" generic tab which would allow you to copy and paste the
rows into a tab that is compatible with your radio. Whichever is the
most convenient for you.
But to answer your question, the Tone column in your file is
equivalent to the Tone Mode column of the CHIRP spreadsheet style
memory editor. When Tone Mode is set to "Tone", only the Tone field is
used in the editor. The other fields (ToneSq, DTCS Code, DTCS Rx Code,
DTCS Pol and Cross Mode) are blank (when "Hide Unused Fields" is
enabled) and are currently unused/ignored by CHIRP. When you try to
put something on one of the "blank"(unused/ignored) fields, the CHIRP
"Smart Tone Modes" thinks you've changed your mind about and tries to
"guess" the correct Tone Mode based on the fields that you've just
entered a value into.
So back to your file. With the Tone column set to Tone, then only the
rToneFreq (Tone) is going to be used by CHIRP in the editor. The
cToneFreq (ToneSql), DtcsCode (DTCS Code) and DtcsPolarity (DTCS Pol)
fields will be ignored by CHIRP and should be ignored by you.
So once you set Tone Mode to Tone and entered the CTCSS frequency into
the Tone field, stop. The remaining fields pertaining to selective
squelch should remain blank.
You might take a look at the column guides linked to here for more information:
http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI
------------------------------
Message: 7
Date: Sun, 9 Jun 2019 13:01:53 +0000
From: David <davidp.jackson at hotmail.co.uk>
Subject: Re: [chirp_users] Adding 2m and 70cm repeaters
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<AM6PR0202MB33205DBFE9797C0849E3B7D3C3120 at AM6PR0202MB3320.eurprd02.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
Many thanks, Jim,
That was a clear and fully comprehensive response, much appreciated.
I opened a new file and imported the .CSV file(s) successfully. This confirmed which columns to populate on my saved radio file. A minor edit was all that was required. Also, it uploaded to radio successfully.
Kind regards
David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190609/47c7188e/attachment-0001.html
------------------------------
Message: 8
Date: Sun, 9 Jun 2019 16:32:29 +0300
From: Amnon Zohar <amnon.zohar at gmail.com>
Subject: Re: [chirp_users] Adding 2m and 70cm repeaters
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CAN5HzcS4NXZJ1TPZFnq7heePVABze67b5nnLfUv3ynrBvsWjCQ at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
??to both of you
??????? ??? ??, 9 ????? 2019 ?-16:04 ??? ?David?? <?
davidp.jackson at hotmail.co.uk??>:?
> Many thanks, Jim,
>
> That was a clear and fully comprehensive response, much appreciated.
>
> I opened a new file and imported the .CSV file(s) successfully. This
> confirmed which columns to populate on my saved radio file. A minor edit
> was all that was required. Also, it uploaded to radio successfully.
>
> Kind regards
>
> David
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
--
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190609/d06104d8/attachment-0001.html
------------------------------
Message: 9
Date: Sun, 9 Jun 2019 16:09:27 +0100
From: Barry Jackson <zen25000 at zen.co.uk>
Subject: [chirp_users] BF888 Settings tab items not saved
To: chirp_users at intrepid.danplanet.com
Message-ID: <1c4deafe-d73a-21d7-a5de-188fb027b595 at zen.co.uk>
Content-Type: text/plain; charset=utf-8; format=flowed
Hi,
Has anyone had an issue with Baofeng 888 items on the settings tab (not
memories) not being saved on upload?
I am primarily trying to disable voice prompts, however after editing
the downloaded image and uploading it, the next time I download it, the
setting has reverted (or was never saved).
Editing the hex in the browser produces the same result. Does anyone
know the significance of the red highlighted values?
Chirp version is CHIRP daily-20190412 and I see nothing in the change
log since then related to the BF888.
One thing I notice is that the progress bar on upload moves very quickly
after about half way, whereas the download is at a steady rate, which
makes me wonder if it skips part of the upload.
Cable is a marked up as Baofeng and is regularly used with the UV5R
without problems.
OS is Mageia Linux using our official package which is maintained by me.
Any ideas welcome.
Cheers,
Barry
------------------------------
Message: 10
Date: Sun, 9 Jun 2019 11:15:57 -0400
From: "Rodney D. Myers" <RodneyMyers60 at yahoo.com>
Subject: [chirp_users] Yaesu ft-2dr programming cable
To: chirp_users at intrepid.danplanet.com
Message-ID: <20190609111432.50291b4e at yahoo.com>
Content-Type: text/plain; charset="us-ascii"
Just bought a Yaesu ft-2dr. I thought I purchased a programming cable.
I grabbed a cloning cable instead.
Which cable is the correct to use?
Main programming computer is a debian (linux) laptop.
Thanks
--
Rodney D. Myers <RodneyMyers60 at yahoo.com> - kg6anx
They that can give up essential liberty to obtain a
little temporary safety deserve neither liberty nor safety.
Ben Franklin - 1759
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 528 bytes
Desc: OpenPGP digital signature
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190609/570aae2c/attachment-0001.bin
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
End of chirp_users Digest, Vol 126, Issue 7
*******************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190609/09eff73b/attachment.html
More information about the chirp_users
mailing list