[chirp_users] DMR CHIRP suggestions

Chuck Hast kp4djt at gmail.com
Thu Jul 4 07:08:23 PDT 2019


I use EditCP on some of my radios (TYT radios) it is written by Dale
Farnsworth, you can go to his page.
He makes mention to Chirp in his documentation. It is very good much
tighter than most of the CPS you
get with your radios. Here is the web page:

https://www.farnsworth.org/dale/codeplug/editcp/

Someone some day I hope will wake up and build a radio or a programming
interface that looks at things
the way we do in hamdom.  I.e. you select a channel pair, it has the
frequency CC and if both slots are in
use. Then you map talk groups to that channel pair rather than the present
method which for commercial
usage makes sense.  For us hams we should not have to over and over add the
same repeater data for
each and every talk group. But until that day I guess we are saddled with
that weirdness.

Best Regards...

On Wed, Jul 3, 2019 at 3:20 PM Tom Henderson <Tom at henderson4.us> wrote:

> Yes, the config for DMR is so fundamentally different from most of the
> radios CHIRP supports that it would pretty much have to be completely
> different software.
>
> Tom Henderson
>
> On 7/3/19 12:54 PM, Michael MacLeod wrote:
>
> Oh dear, I guess the sums it up as to why I had issues finding any.
>
> Thanks
> .\\
>
>
> On July 3, 2019 at 1:43:51 PM, Nigel A. Gunn G8IFF/W8IFF (nigel at ngunn.net)
> wrote:
>
> There are NO DMR radios supported by Chirp.
>
>
> On 03 July 2019 at 12:40 Michael MacLeod <theplayer at playersrealm.net>
> wrote:
>
> Want to purchase a DMR radio that is supported by CHIRP. All my machines
> run OS X, so
> most OEM programming apps will not work.
>
> So I’m basically looking for CHIRP supported DMR handheld suggestions.
>
> Thanks!
> .\\
>
>
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937
> 825 5032
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
> http://www.ngunn.net
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KM4UQB at tom at henderson4.us
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chuck Hast at kp4djt at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



-- 
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190704/e9c52d02/attachment-0002.html 


More information about the chirp_users mailing list