[chirp_users] UV-5R question
jardy72 at yahoo.com
Mon Jan 21 11:59:30 PST 2019
When you manually program a Baofeng, you must enter the receive frequency and it’s tone, etc first, then program the transmit frequency in the same channel. Doing the offset I believe only works manually in bro mode. See www.miklor.com for more info.
Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator.
> On Jan 21, 2019, at 11:25, Keith .Yordy <keith.yordy at gmail.com> wrote:
> I have used Chirp to setup several UV-5R units and it works fantastic! However, I was trying to setup a UV-5R with the keypad. I see in Chirp there is a setting for Duplex, but this doesn't appear to show up anywhere in the UV-5R. I have compared 462.600 simplex and 462.600 duplex and see no differences in the keypad menu system. if I was to setup a duplex channel manually, I am assuming I would have to set the offsets, etc., even though they show no differences on the UV-5R. Is there another trick I am missing?
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users