[chirp_users] Newbie BTECH UV-5X3

Christophe josepa2mander at yahoo.fr
Sun Jan 20 10:49:03 PST 2019


Hi Joseph,
Check parameter "Tone mode" on the channel you try to listen, it could cut the sound if this is set other than "None" on CHIRP.if you want more information check RxDTCS information https://chirp.danplanet.com/projects/chirp/wiki/DevelopersToneModes
Christophe
      De : joe Bonneville <isaiahrocks2010 at gmail.com>
 À : chirp_users at intrepid.danplanet.com 
 Envoyé le : Dimanche 20 janvier 2019 19h40
 Objet : [chirp_users] Newbie BTECH UV-5X3
   
I have downloaded CHIRP and used to program my radio but after uploading data to my radio the channels are there but I have no sound when it picks up a signal. Any suggestions would be appreciated. 

-- 
Joseph BonnevilleC-(802)-289-1299e-mail: isaiahrocks2010 at gmail.com_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to CHRISTOPHE DUPONT at josepa2mander at yahoo.fr
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190120/669c2999/attachment-0002.html 


More information about the chirp_users mailing list