[chirp_users] more trouble with CSV file

Neil B ne.b at hotmail.co.uk
Wed Jan 16 04:00:49 PST 2019


mem 16 onwards is missing commers on ends of each line.
 5 missing if line ends in a 5, 4 missing if it ends in a S.

14,FRS14,467.7125,,0,,88.5,88.5,23,NN,NFM,5,,,,,
15,GMR15,462.55,,0,,88.5,88.5,23,NN,FM,5,S

14,FRS14,467.7125,,0,,88.5,88.5,23,NN,NFM,5,,,,,
15,GMR15,462.55,,0,,88.5,88.5,23,NN,FM,5,S,,,,
----- Original Message -----
From: John Mehl<mailto:ke4egc at gmail.com>
To: Discussion of CHIRP<mailto:chirp_users at intrepid.danplanet.com>
Sent: Wednesday, January 16, 2019 11:40 AM
Subject: Re: [chirp_users] more trouble with CSV file

Hi Glenn; if you can use notepad Try looking at your csv file with it. I see a difference in the record format starting at line 15. I'm not sure but I believe csv records are to be the same length. Also starting after 135 there are blank entrys.
Looks like line # 136 to 137 are missing, also 139 and 140. I don't know if this your problem or not. However I could not load your file using Chirp, it caused an  error .... Good luck...John M...



On Tue, Jan 15, 2019 at 11:38 PM Glenn At Home <GlennErvin at cableone.net<mailto:GlennErvin at cableone.net>> wrote:
Hi All,
Maybe someone can figure out what I did wrong in my CSV file.
It was working, and I added a 10 meter repeater and two 6 meter repeaters and a 1.25 meter repeater.
It says error on line 169, but it always seems to reference the last line.
The lines in question would be between the left most numbers of 127 and 140.
The repeaters on repeater.com<http://repeater.com> only gave one tone, and I put in the others, the 6 & 10 m, just to keep the fields full.
The one that was given was the 1.25 m repeater, I'll list that one below:
224.7600

-1.6 MHz

146.2

Omaha

Thanks for any help.

Sent From My Tabletop
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John at ke4egc at arrl.net<mailto:ke4egc at arrl.net>
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>

________________________________

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to m1cfk at ne.b at hotmail.co.uk
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190116/7779f7de/attachment-0002.html 


More information about the chirp_users mailing list