[chirp_users] My CSV File Attached

Glenn At Home GlennErvin at cableone.net
Sat Jan 12 19:44:31 PST 2019


Well, it refers to using  a button with a graphic that when converted to TXT 
does not make anything.
So they refer to buttons that I have no way of knowing even their name.
Also, if they did give the name, I would then need to have someone read 
where each button is, like for example
There are four turn knobs.
I figured out that the bottom one powers it on/off and the inner dial around 
it is the right side squelch.
There is a left volume and squelch too.
Above the volume and squelches on each side, are the tuning knobs.
There are three vertical buttons between the knobs and display on each side, 
and there are nine buttons between the knobs.
The fourth and ninth say scan on them.
That is all I know.
Glenn

----- Original Message ----- 
From: <al at aljones.us>
To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
Sent: Saturday, January 12, 2019 9:24 PM
Subject: Re: [chirp_users] My CSV File Attached


While it may not be a lot of help, can you relate what the manual says and
then we can 'translate' them for you in ways you can (I'm sorry) see.

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
<chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Glenn At Home
Sent: Saturday, January 12, 2019 20:45
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] My CSV File Attached

The trouble with that is that I can't yet use the radio, because the manual
describing the buttons don't say which buttons in a way a Blind person can
read.
So I'm frustratingly trying to get some stuff f into it that I can use.
Glenn

----- Original Message -----
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Saturday, January 12, 2019 8:35 PM
Subject: Re: [chirp_users] My CSV File Attached


On Sat, Jan 12, 2019 at 9:26 PM Glenn At Home <GlennErvin at cableone.net>
wrote:
>
> This was originally from my Baofeng, and I put in the 40 CB frequencies
> that go from line 120 to line 160.
> But after importing this, and then downloading it again from the radio,
> only lines up to 15 are in the radio.
> Glenn
>
You haven't fully populated the rows. The need to look close to the
rows above. One of the differences would be that Mode would be AM. The
best way to know how it should look is to program a memory in the
radio and then export it to a CSV file. Then use that as a template
for the rest.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Al Jones at al at aljones.us
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com 




More information about the chirp_users mailing list