[chirp_users] Possibly Bad USB to radio cable
D.J.J. Ring, Jr.
Sat Jan 12 19:48:56 PST 2019
No, : Silicon Labs.
I sent more info in a separate email.
Plus I said I was using both Win10 and Linux. Linux never has given
me driver problems!
73
DR
N1EA
On Sat, Jan 12, 2019 at 10:37 PM Jardy via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
>
> Check Device Manager and see if the cable shows to be a Prolific. If it is, roll your driver back to 3.2.0.0. See www.miklor.com for more info on this.
>
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal Translator.
>
>
> On Jan 12, 2019, at 19:22, D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:
>
> Hi,
>
> I have a Wouxun red colored cable, suddenly it no longer works. I
> have the Wouxun Windows programming software: Doesn't communicate
> with radio. CHIRP on Win10 and Arch Linux: Same problem, radio
> doesn't respond.
>
> It used to work, now suddenly it doesn't work!
>
> Is there some way I can check the USB to double jack (1/8 (3.5mm) and
> 3/32 inch (2.5mm).
>
> I have a club member with the same cable, but it's been 20 days since
> he was going to come over to test my cable by substitution.
>
> It's either my transceiver or my cable! Only have one hand held that
> takes this cable!
>
> I only have a 100 MHz dual trace 'scope and a nice RadioShack 22-812
> DMM to test with. So I could capture slower pulses. Probably won't be
> a good test like substitution of working cable.
>
> I know it's a fairly dumb question but you never know until you ask!
>
> 73
> David N1EA
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
More information about the chirp_users
mailing list