[chirp_users] Uv-5rtp import frs gmrs channel

[Thomas MARCHESSEAU]

Version of February the 15th is ok . 



Small keyboard = Small Email !
Sent from an iPhone : +33 6 22859135

> Le 24 févr. 2019 à 22:21, Jim Unroe <rock.unroe at gmail.com> a écrit :
> 
>> On Sun, Feb 24, 2019 at 10:25 AM Teresa Wik <tskiride at gmail.com> wrote:
>> 
>> When I try to "import from stock config" the FRS and GMRS channels, the first 14 (all FRS) of them are greyed out With a message "Cannot be imported because tuning step 12.5khz not supported. Frequency requires 12.5khz step"
>> 
>> I've also tried copy/paste and import as well as manually entering them in chirp always getting the same message.
>> 
>> Any thoughts?
> 
> A recent CHIRP update broke the driver regarding the STEP
> requirements. You will have to revert back to an early February
> version of CHIRP.
> 
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Thomz0r at marchesseau at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com