[chirp_users] Uv-5rtp import frs gmrs channel

[Norman Sebern]

Step 2 in your Menu for a UV5R is  STEP{Frequency Step}   Available
Settings Are 2.5/5/6/6.25/10/12.5/25khz Your error message says you have to
change
to the correct Frequency step. The Frequency Step for GMRS is 12.5khz..What
is the Frequency sterp on your radio?

On Sun, Feb 24, 2019 at 10:00 AM Dennis Wage <dwage at dwage.com> wrote:

> Radio model?
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
>
> On Sun, Feb 24, 2019 at 9:25 AM Teresa Wik <tskiride at gmail.com> wrote:
>
>> When I try to "import from stock config" the FRS and GMRS channels, the
>> first 14 (all FRS) of them are greyed out With a message "Cannot be
>> imported because tuning step 12.5khz not supported. Frequency requires
>> 12.5khz step"
>>
>> I've also tried copy/paste and import as well as manually entering them
>> in chirp always getting the same message.
>>
>> Any thoughts?
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Dennis Wage at dwage at dwage.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Norman Sebern at nsebern14 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190224/539ade71/attachment.html