[chirp_users] BF-888S Language/Step Problem
Richard Dillman
Sun Feb 17 16:37:50 PST 2019
I've been happily using CHIRP to program BF-888S radios but today I ran
into a problem with the language and frequency step entries (I'm using
CHIRP daily-20190217).
o When using my stored .img file for the BF-888S the frequencies upload
correctly but the voice announcements are in Chinese even though English is
selected in Settings.
o When trying to manually enter a frequency ending in, for example, .5875,
into an .img file, an error message appears stating "Error setting memory:
Tuning step 12.50 not supported, Frequency requires 12.50kHz step".
I've never run into either of these problems before and would be grateful
for any advice and guidance.
Thanks,
RD
=========================
Richard Dillman
=========================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190217/c4594b77/attachment.html
More information about the chirp_users
mailing list