[chirp_users] Port selection on laptop

[Bennie Potgieter]

Hi

Thank you will do that.

Thank you

On Sun, 29 Dec 2019, 17:43 John La, <JohnLa at usa.net> wrote:

> If you are using windows, go to device manager and verify the port
> assigned to the cable is active.
>
> If you are using a generic cable with a Prolific chip, you may need to
> download an earlier driver.
> Refer to this driver page.
> www.Miklor.com/COM/UV_Drivers.php
>
>
> John K3NXU
>
> www.Miklor.com
> www.miklor.com/UV5R/
> www.Miklor.com/COM/UV_CHIRP.php
>
>
>
>
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Bennie
> Potgieter
> *Sent:* Sunday, December 29, 2019 5:16 AM
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* [chirp_users] Port selection on laptop
>
>
>
> Goodday
>
>
>
> Im new to this,bought 4 Aofeng radios and not all of them are on the same
> chanels,downloaded the Cherp software but I seem to strugle to select the
> usb port on my laptop,can someone maybe help me with that?
>
>
>
> Thank you
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to potgieterbarends4 at gmail.com at
> potgieterbarends4 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191229/7b9493a5/attachment.html