[chirp_users] Chirp under Linux
Glenn K 0 L N Y :)
Mon Dec 23 09:23:07 PST 2019
I hate typing sudo first.
I always do sudo su or sudo -s first so I can type whatever I want without the worry of leaving out sudo.
Glenn
----- Original Message -----
From: D.J.J. Ring, Jr.
To: Discussion of CHIRP
Sent: Monday, December 23, 2019 12:47 AM
Subject: Re: [chirp_users] Chirp under Linux
Phil,
Someone gave you this command, but they forgot to start it with "sudo" and if you didn't use sudo the command will not work.
sudo chmod 777 /dev/ttyUSB0
Check the ownership of this:
ls -l /dev/ttyUSB0
This will list the owners of /dev/ttyUSB0.
See if you're in the group that is listed.
Enter this command:
groups
It will return the groups your a member of. You have to belong to the group that is listed when you gave the command: ls -l /dev/ttyUSB0
If you disconnect the USB cable then reconnect it. You can confirm the device name by this command:
sudo dmesg | tail
You should see lines that says "new device" and it will give the address of the new device, that's the device CHIRP needs to use in order to work .
Try that,
73
David N1EA
On Mon, Dec 23, 2019, 00:20 Phil <phillor9 at gmail.com> wrote:
On 9/12/19 3:51 am, Jim Unroe wrote:
Hello everyone,
I said I'd report back after I received another programming cable. This
one contains an FTDI chip and, of course, the radio is still not recognised.
The cable connectors must not be making proper contact. I've read
suggestions that the cable needs to be pressed in firmly. If I press any
harder then I'll surly break something.
What a pain!
--
Regards,
Phil
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191223/59572c55/attachment.html
More information about the chirp_users
mailing list