[chirp_users] New Daily Build

[Build System]

Greetings,

A new daily build of CHIRP is available.  This includes changes made
directly to the tree yesterday, and may include additional features,
bug fixes, and/or bugs.  If you are interested in trying it, grab it
from the following location:

  http://trac.chirp.danplanet.com/chirp_daily/daily-20191205


A list of the changes included in this build (since the last daily)
follows:

Changes for Build #603
[Dan Smith <dsmith at danplanet.com>] [ftm350] Fix trailing whitespace style issue

Fallout from #6639

[Dan Smith <dsmith at danplanet.com>] [ts590] De-register the TS590 clone mode driver

...which seems to be breaking File->New. This is a band-aid until that
can be investigated and resolved.

#7409

[Andrew Jorgensen <andrew at jorgensenfamily.us>] [frs/gmrs] 2017 rule changes Fixes #5753

This adds the additional FRS channels (15-22) and expands GMRS channels include
all frequencies add in the 2017 rule changes.

It also adds the GMRS repeater channels with the prescribed +5.0MHz offset
(though you'll have to find the correct tones for your local GMRS repeaters).

After some feedback on the mailing list, I've chosen to number the channels
according to the FRS numbering, rather than try to preserve the obsolete
numbering, and I've chosen to name the GMRS repeater channels with both the
"550" style numbering that's common in repeater naming and the "15R" name that
makes it clear that it's receiving on channel 15.

[Jim Unroe <rock.unroe at gmail.com>] Fix Kenwood TK-370 tuning steps

Also TK-260, TK-270, TK-272, TK-278, TK-360, TK-372 and TK-378

fixes #7199

[Jim Unroe <rock.unroe at gmail.com>] Fix Puxing PX-888K tuning steps

fixes #6887

[Jim Unroe <rock.unroe at gmail.com>] Fix Yaesu FT-4 valid steps

Should also fix FT-25, FT-35 and FT-65.

fixes #6807

[Jim Unroe <rock.unroe at gmail.com>] Fix Radioddity R2 tuning steps

fixes #6743

[Jim Unroe <rock.unroe at gmail.com>] Fix Yaesu FTM-350 tuning steps

fixes #6639

[Dan Smith <dsmith at danplanet.com>] [d700] Fix valid_tuning_steps on D700, D7x

Fixes #7053

[Dan Smith <dsmith at danplanet.com>] [d700] Add support for AM channels

Fixes #5689

[Dan Smith <dsmith at danplanet.com>] [d700] Add settings parity with TH-D7

This refactors the driver code to allow the D700 radio driver
to leverage the settings support that is in the D7 driver. Only
a few setting support differences between the two radios were
handled. Also setting the packet path and callsign seems to be
only partially working, or the radio has some very old and outdated
restrictions on what can be set.

Closes #7407

[Dan Smith <dsmith at danplanet.com>] Fix up the kenwood detection logic after recent driver changes

While working on #7407 it became clear that the recent HF rig support
almost entirely broke talking to the D700 (and probably others). This
makes some changes to the ID routines:

- Prioritizes the baud scan for the regular delimiter ahead of the HF
  one, since the vast majority of users will be using the former. The
  delimiter change substantially increased the ID time for regular
  radios set to a high baud rate.
- Prioritizes fast baud rates over the slow ones in the scan.
- Adds a quick recovery to the case where the radio responds at the
  desired baud rate with "?" meaning "what is all this junk you have
  been sending me", which fixes the case where the ID fails on the
  first attempt and succeeds on the second.