[chirp_users] USB Error using Ubuntu Mate

[Tony Fuller]

>From a command prompt run

sudo usermod -aG dialout $USER

Log out and log back in (or reboot)

Tony

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Monte Long <lefty556 at gmail.com>
Sent: Monday, August 26, 2019 11:18:23 AM
To: chirp_users at intrepid.danplanet.com <chirp_users at intrepid.danplanet.com>
Subject: [chirp_users] USB Error using Ubuntu Mate

I'm using Ubuntu Mate on my laptop to run chirp.  I keep getting an error:  “Errno could not open serial port /dev/ttyUSB0.  Errno permission denied /dev/ttyUSB0”

I can open a terminal and type in "sudo chmod 777 /dev/ttyUSB0" and it solves the issues for that session.  But, the next time I boot up the laptop, I have to plug in the cable, then go to the terminal and re-do the chmod command.  Is there a way to get that to stick permanently?

Thanks!

Monte

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190826/ce1b5b44/attachment.html