[chirp_users] DPL data from Motorola into Baofeng UV5R

[Reza Rahgozar]

Yes dears I will fuck u I u suck my penis

On Thu, 15 Aug 2019, 21:42 Clark W. Nicholls via chirp_users, <
chirp_users at intrepid.danplanet.com> wrote:

> I have 10 channels from a Motorola SP50 I would like to program into my
> UV5r (and other radios) using CHIRP
>
> I don't see where to input DPL other than perhaps DTCS as it has the 205
> number I'm looking for in the pull down menu.
>
> In which case, what do I choose for the DTCS Pol field? NN shows up by
> default.
>
> In the Motorola, 205 was the DPL for both transmit and receive. I have the
> frequencies from the radios I read using the SP50 Motorola software.
>
> Clark
> Clark W. Nicholls
> "Reality, it's not what you think."
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Orbit at reza.bahrami1980 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190816/f1f8020b/attachment.html