[chirp_users] CHIRP ON LINUX, UNABLE TO FIND COM PORT FOR BAOFENG

KBD99603 KBD99603 at protonmail.ch
Sat Apr 20 14:23:50 PDT 2019


Alright, after hours and hours of trying basically the same thing, I was finally able to connect my radio to chirp. Thanks for all the help, it was your suggestions that helped me search the internet further.
I had success by following directions on an Ask Ubuntu Thread. The link is below if you want to check it out:

https://askubuntu.com/questions/210177/serial-port-terminal-cannot-open-dev-ttys0-permission-denied

Thanks Again:)
KBD99603

Sent from ProtonMail mobile

-------- Original Message --------
On Apr 20, 2019, 2:26 AM, KBD99603 via chirp_users wrote:

> Hello everyone, I have a Baofeng BF-UVB3 8W radio. My computer is linux, running Ubuntu 18.10, the newest. I have CHIRP installed and running, but I am not able to find the COM port for my radio, connected via a USB programming cable.
>
> I have entered every terminal command line I could find info about on the internet, even one that showed me port numbers for connected devices, yet there is no port number or path that works for my radio.
>
> What COM port should I use?
>
> Thank You
> KBD99603
>
> Sent with ProtonMail Secure Email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190420/cdee2d0f/attachment-0002.html 


More information about the chirp_users mailing list