[chirp_users] FT70 fails to download
danclemmensen at gmail.com
Wed Apr 3 22:36:26 PDT 2019
Sorry, I made a few mistakes, apparently. You will need to get an answer
from someone who has an FT-70. See this thread:
On Wed, Apr 3, 2019 at 10:20 PM Dan Clemmensen <danclemmensen at gmail.com>
> that's the device ID for a pl2303. the name of the module is
> to see if the module got loaded.
> If not,
> sudo modprobe pl2303
> to force-load the module
> On Wed, Apr 3, 2019 at 10:07 PM Dennis Carr <
> dennisthetiger at chez-vrolet.net> wrote:
>> On Wed, 3 Apr 2019 21:51:05 -0700
>> Dan Clemmensen <danclemmensen at gmail.com> wrote:
>> > I'm a bit surprised that it's /dev/ttyACM0. on my (non-Debian) Linux,
>> > that would be assigned to a modem a fake modem such as an
>> > OTG-connect3d phone or something like that.
>> Yeah, confirmed, it's /dev/ttyACM0. Tried 'watch'ing that, but 'watch
>> ls /dev/tty*' is kinda useless as it overflows.
>> > on my computer, USB serial dongles get addresses like /dev/ttyUSB0
>> I got that as well with the Baofeng clone cable I've got, doesn't seem
>> to be the case here.
>> The only other thing making me think about this a bit is the fact that
>> 'lsusb' comes up with this:
>> Bus 003 Device 025: ID 26aa:001b
>> ...that's it, no description following the devid. So my computer sees
>> something there, it just doesn't know what it is.
>> ...am I missing something somewhere, a kernel mod maybe?
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> This message was sent to Dan Clemmensen at danclemmensen at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users