[chirp_users] Adding a new frequency

Nigel A. Gunn G8IFF/W8IFF
Tue Apr 23 11:45:54 PDT 2019


I'm guessing that, on your laptop, you would have needed to press the "show empty memories" button at the top of the spreadsheet.


> On 23 April 2019 at 14:43 Mike <mike.cajun at gmail.com> wrote:
> 
>     I'm now using my desktop and I see what you mean. All the memory channels were downloaded from the radio and I can make changes/add repeaters now. On my laptop, the only things downloaded were 2 repeaters I'd tried to add without Chirp. 
> 
>     I think I'm off and running, now. I don't know why my laptop wasn't populated like my desktop was.
> 
>     Thanks to both of you.
> 
>     Mike
> 
>     On Tue, Apr 23, 2019 at 12:30 PM Dan Clemmensen < danclemmensen at gmail.com mailto:danclemmensen at gmail.com > wrote:
> 
>         > >         More specifically, after you download, you will see CHIRP's "spreadsheet" populated with your current "memorys". You can now modify that spreadsheet to change the existing memories or fill in "memories" that are currently "empty". You may need to hit the "show empty memories" button to cause the "empty" lines to show up so you can fill one of them in.  CHIRP cannot cause your radio to suddenly have additional memory capacity, so if your radio has only 20 memories, CHIRP will display that many only.
> > 
> >         After you mess around with the "spreadsheet" display, you can then "upload to radio" to cause the to be put back into the radio.
> > 
> > 
> >         Hint:   After you download and before you make changes, save the image. After you change the image and before you upload, save to another file.
> > 
> >         On Tue, Apr 23, 2019 at 11:12 AM Chance Fulton < chance.fulton at gmail.com mailto:chance.fulton at gmail.com > wrote:
> > 
> >             > > >             Download what is in your radio, make changes, and then write it back using the same menu that you used to read the radio.
> > > 
> > >             Thanks,
> > >             Chance
> > >             AD8CJ
> > > 
> > >             On Tue, Apr 23, 2019 at 2:08 PM Mike < mike.cajun at gmail.com mailto:mike.cajun at gmail.com > wrote:
> > > 
> > >                 > > > >                 How do I add a new frequency? I downloaded what was in my radio - my fumbling around - but I'd like to go ahead and put new frequencies in. I can't figure out how to do that. I'd appreciate some assistance.
> > > > 
> > > >                 Thanks,
> > > >                 Mike
> > > >                 WA5ZTE
> > > >                 _______________________________________________
> > > >                 chirp_users mailing list
> > > >                 chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> > > >                 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > >                 This message was sent to Chance at chance.fulton at gmail.com mailto:chance.fulton at gmail.com
> > > >                 To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > > 
> > > >             > > > 
> > > 
> > >             --
> > >             Chance Fulton
> > >             chance.fulton at gmail.com mailto:chance.fulton at gmail.com
> > >             810.441.5795
> > >             _______________________________________________
> > >             chirp_users mailing list
> > >             chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> > >             http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >             This message was sent to Dan Clemmensen at danclemmensen at gmail.com mailto:danclemmensen at gmail.com
> > >             To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > 
> > >         > >         _______________________________________________
> >         chirp_users mailing list
> >         chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> >         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >         This message was sent to Mike at mike.cajun at gmail.com mailto:mike.cajun at gmail.com
> >         To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > 
> >     >     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>     To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 


Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190423/7c9fd858/attachment.html 


More information about the chirp_users mailing list