[chirp_users] CHIRP ON LINUX, UNABLE TO FIND COM PORT FOR BAOFENG

[David Wilson]

Check here.

https://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux#serial-port-permissions

Also....

https://www.linuxnix.com/what-is-linuxunix-dmesg-command-and-how-to-use-it/

David


On Sat, Apr 20, 2019, 10:52 AM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sat, Apr 20, 2019 at 6:28 AM KBD99603 via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
> >
> > Hello everyone, I have a Baofeng BF-UVB3 8W radio. My computer is linux,
> running Ubuntu 18.10, the newest. I have CHIRP installed and running, but I
> am not able to find the COM port for my radio, connected via a USB
> programming cable.
> >
> > I have entered every terminal command line I could find info about on
> the internet, even one that showed me port numbers for connected devices,
> yet there is no port number or path that works for my radio.
> >
> > What COM port should I use?
>
> On every Linux distro that I have used it has been "/dev/ttyUSB0", On
> a new install of CHIRP I've always had to scroll all the way down to
> the bottom of the list of ports to find it.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David at n5vtd25 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190420/dba8120b/attachment.html