[chirp_users] Programming Both sides w/ PL/DPL

[Jim Unroe]

On Mon, Oct 29, 2018 at 11:41 PM Richard Gaun <rpgaun at gmail.com> wrote:
>
> Hey everyone,
>
> I have tried everything I can think of to put a DTCS on both sides of the radio, TX & RX and have had no luck. Could one of you folks zip me off the settings for that programming or send me in the right direction for them. Thanks!
>
> Rich Gaun
> KG7ETW
>

Hi Rich,

Tone Mode: DTCS (The radio will use DCS for transmit. In this mode,
the receiver uses DCS with the same value as the transmitter)
DTCS Code: {desired DTCS code}
DTCS Pol: {desired DTCS polarity}

That's all there is to it.

http://www.miklor.com/COM/UV_CHIRP.php#guides

Jim KC9HI