[chirp_users] Newbie question.

[frankB]

Since I had no success with the IC-T70A and MacOS, I turned to my Raspberry
PI 3 with Raspbian. I had to issue the permissions commands under:
https://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux

I ended up just downloading the current tar file. Just in case you have the
same issue, the Raspbian python gtk package is called pygtk2. Good luck.
On Thu, Oct 4, 2018 at 12:31 PM Aubrey Turner <aubrey.c.turner at gmail.com>
wrote:

> Make sure you log and and log back in after making the change. Changes
> to Linux groups don't get applied until you log in.
>
>
> On 10/04/2018 02:26 PM, clayton_k4qm at sc.rr.com wrote:
> > I am very new to this program and am using Linux Mint.  Could some one
> advise me how to set up the comm port?
> > I tried to set up dialout with my user name but for some reason, didn't
> take
> >
> > Thanks  Clayton K4QM
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to frankB at thereur at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181004/d871fa94/attachment.html