[chirp_users] Programming a Baofeng GT3

[Calum Abernethy]

Just to confirm I now have the Motorola and Baofeng radios communicating
with each other using dcs sub codes.

Thank you for all the help. It is good to know you are all out there.

Calum

On Thu, 1 Nov 2018, 15:26 Calum Abernethy, <calum.abernethy at gmail.com>
wrote:

> Thank you for the responses.
>
> I've now found out that the Motorola has 121 sub codes made up of 38 ctcss
> and 83 dcs. I assume the first 38 will be ctcss followed by the dcs. With
> only 38 ctcss against the 50 on the Baofeng the are going to be gaps which
> may explain why I was not connecting between the radios apart from 67.0. I
> only tried a couple and gave up.
>
> I will check this out tonight.
>
> Cheers
>
> Calum
>
> On Thu, 1 Nov 2018, 13:53 Tom Consodine, ND5Y via chirp_users, <
> chirp_users at intrepid.danplanet.com> wrote:
>
>> That isn't random amounts. There are 50 standard CTCSS tones and the
>> up/down arrows scroll through them.
>>
>> It also has nothing to do with the VFO frequency tuning steps of 2.5,
>> 5.0, 12.5 KHz.
>>
>> Tom ND5Y
>>
>>
>> > The problem is the ctcss codes on the Baofeng seem to increase by
>> random
>> > amounts ranging from 2.3 to 3.7 on the codes I have checked so far.
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Calum at calum.abernethy at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181102/56b25743/attachment.html