[chirp_users] Error message trying to connect Yaesu FT7900R

Jerry jriechert at gmail.com
Sun May 6 16:26:36 PDT 2018


In my case on Windows, different cables show as different COM ports.

Jerry R

On Sun, May 6, 2018, 4:04 PM Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net>
wrote:

> I use one copy for all radios, including a 7900. Same cable, different
> connector but under Win 10 or Ubuntu.
>
>
> > On 06 May 2018 at 18:40 Mary Graff <megraff at gmail.com> wrote:
> >
> >
> > I have a Yaesu FT60R that connects perfectly, but when I try to connect
> FT7900 I get an error message saying the USB file isn’t found, I’m trying
> to us the same connection that does work on the FT60r only difference is
> the cable plugged into the radio. Should I be able to use the software with
> 2 different radio’s? I can’t confirm or reject if it is the cable. I have
> tried to install a separate instance of Chirp but I get the same error
> message “could not open port /dev/cu.usbserial-RT0UYFJC: [Errno 2] No such
> file or directory: '/dev/cu.usbserial-RT0UYFJC’ yet this is the same
> connection on the FT60r. I am also using this on a Mac Book high Sierra
> >
> > Thanks,
> > Mary
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937
> 825 5032
> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
> http://www.ngunn.net
> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> International #385,
>  Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to jriechert at gmail.com at jriechert at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180506/f2229b76/attachment-0002.html 


More information about the chirp_users mailing list