[chirp_users] (no subject)

Dennis Wage dwage at dwage.com
Tue Mar 27 10:59:22 PDT 2018


That band is 156.2475 - 174.00 MARITIME MOBILE Maritime (80), Private Land
Mobile (90), Public Mobile (22), FIXED/LAND MOBILE (2)(3) Auxiliary
Broadcasting (74),



Dennis M. Wage

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net

On Tue, Mar 27, 2018 at 12:44 PM, Tycen Stafford <tycen at tycen.com> wrote:

> I believe this is what you want - but I'd love to have someone confirm:
>
>
>
>
> The CSV is attached (so, you might already know this, but you'll want to
> download the stock config from your radio, then paste the two rows from
> this CSV into the config, then re-upload it to your radio).
>
> You can put whatever you want in the Name column.
>
> You'll see what I did, but you needed to set an offset (-0.990 in this
> case) to step down your TX frequency. Then it looks like they want a Tone
> on your RX. And finally your mode would be NFM for narrow band.
>
> You can program this all on the radio without chirp and doing it for just
> one channel wouldn't be that time consuming. So, as a backup plan I would
> print off some good instructions for programming by hand (check out
> Miklor's site) and practice doing it by hand so you're ready to do that in
> case something was programmed wrong.
>
> If you know others going on the trip, you could ask them to share their
> CSV file with you.
>
> Good luck!
> -Tycen
>
>
> On Sun, Mar 25, 2018 at 6:26 AM, Kyle <kylezlucas at gmail.com> wrote:
>
>> I am a newbie programming a UV-5r2+ using CHIRP.  Could you help me with
>> how to fill in the fields in CHIRP?  I am going on a week long backcountry
>> ski trip in British Columbia.  The operation area radio frequency given to
>> me is attached below.  How do fill in the fields correctly listed in the
>> screen shot of CHIRP below?  Or do I not have enough information?  I can’t
>> figure out how to get the RX 170.100 and TX 169.110 on the same memory
>> channel.  Then I am not sure if I am entering the tone correctly?
>>
>> Thank you!
>>
>>
>>
>>
>>
>>
>>
>> *CH*
>>
>> *RX*
>>
>> *TX*
>>
>> *Band*
>>
>> *User*
>>
>> *Location*
>>
>> *Tone - RX*
>>
>> *Tone - TX*
>>
>> 1
>>
>> 170.100
>>
>> 169.110
>>
>> narrow
>>
>> GAH
>>
>> Cupola Mt
>>
>> 100.0
>>
>>
>>
>> 2
>>
>> 170.100
>>
>>
>>
>> narrow
>>
>> GAH
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> [image: cid:image003.png at 01D3BCA3.76269ED0]
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Tycen at tycen at tycen.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dennis Wage at dwage at dwage.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/91e73711/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot 2018-03-27 10.33.55.png
Type: image/png
Size: 145914 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/91e73711/attachment-0002.png 


More information about the chirp_users mailing list