[chirp_users] (no subject)

Tycen Stafford tycen at tycen.com
Tue Mar 27 10:44:03 PDT 2018


I believe this is what you want - but I'd love to have someone confirm:




The CSV is attached (so, you might already know this, but you'll want to
download the stock config from your radio, then paste the two rows from
this CSV into the config, then re-upload it to your radio).

You can put whatever you want in the Name column.

You'll see what I did, but you needed to set an offset (-0.990 in this
case) to step down your TX frequency. Then it looks like they want a Tone
on your RX. And finally your mode would be NFM for narrow band.

You can program this all on the radio without chirp and doing it for just
one channel wouldn't be that time consuming. So, as a backup plan I would
print off some good instructions for programming by hand (check out
Miklor's site) and practice doing it by hand so you're ready to do that in
case something was programmed wrong.

If you know others going on the trip, you could ask them to share their CSV
file with you.

Good luck!
-Tycen


On Sun, Mar 25, 2018 at 6:26 AM, Kyle <kylezlucas at gmail.com> wrote:

> I am a newbie programming a UV-5r2+ using CHIRP.  Could you help me with
> how to fill in the fields in CHIRP?  I am going on a week long backcountry
> ski trip in British Columbia.  The operation area radio frequency given to
> me is attached below.  How do fill in the fields correctly listed in the
> screen shot of CHIRP below?  Or do I not have enough information?  I can’t
> figure out how to get the RX 170.100 and TX 169.110 on the same memory
> channel.  Then I am not sure if I am entering the tone correctly?
>
> Thank you!
>
>
>
>
>
>
>
> *CH*
>
> *RX*
>
> *TX*
>
> *Band*
>
> *User*
>
> *Location*
>
> *Tone - RX*
>
> *Tone - TX*
>
> 1
>
> 170.100
>
> 169.110
>
> narrow
>
> GAH
>
> Cupola Mt
>
> 100.0
>
>
>
> 2
>
> 170.100
>
>
>
> narrow
>
> GAH
>
>
>
>
>
>
>
>
>
> [image: cid:image003.png at 01D3BCA3.76269ED0]
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tycen at tycen at tycen.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/7029e0a4/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot 2018-03-27 10.33.55.png
Type: image/png
Size: 145914 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/7029e0a4/attachment-0002.png 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ski-trip.csv
Type: text/csv
Size: 263 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/7029e0a4/attachment-0002.bin 


More information about the chirp_users mailing list