[chirp_users] MAC & Yaesu FT2d?

J woodyblue10731 at gmail.com
Wed Mar 7 12:01:29 PST 2018


Not there, Tried loading the drivers but they are not showing up in that list

> On Mar 6, 2018, at 8:39 PM, Michael Sanford <arkymp at gmail.com> wrote:
> 
> Go to the Apple menu, about this Mac, click System Report, load Extensions under the Software tab. Once it is loaded, it may take a bit, look for your driver, mine says “SillabsUSBDriver” or whatever brand you are using. If it is there, then the driver is there and your dongle should be recognized and should work. Let us know what you find.
> 
> Mike
> K0CCP
> 
> On Mar 6, 2018, at 3:59 PM, J <woodyblue10731 at gmail.com> wrote:
> 
> Running CHIRP on a MacBook Pro running 10.7.?. I can access my FT60R but the FT2D is throwing an error code about the USB port not being installed?
> 
> Any help would be greatly appreciated.
> 
> John
> KY4BSL
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David Sanford at arkymp at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John at woodyblue10731 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list