[chirp_users] MAC & Yaesu FT2d?

Michael Sanford arkymp at gmail.com
Tue Mar 6 17:39:10 PST 2018


Go to the Apple menu, about this Mac, click System Report, load Extensions under the Software tab. Once it is loaded, it may take a bit, look for your driver, mine says “SillabsUSBDriver” or whatever brand you are using. If it is there, then the driver is there and your dongle should be recognized and should work. Let us know what you find.

Mike
K0CCP

On Mar 6, 2018, at 3:59 PM, J <woodyblue10731 at gmail.com> wrote:

Running CHIRP on a MacBook Pro running 10.7.?. I can access my FT60R but the FT2D is throwing an error code about the USB port not being installed?

Any help would be greatly appreciated.

John
KY4BSL
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David Sanford at arkymp at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list