[chirp_users] (no subject)

[Dennis Wage]

I am assuming channel 2 is for simplex.

Dennis M. Wage

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net

On Tue, Mar 27, 2018 at 12:59 PM, Dennis Wage <dwage at dwage.com> wrote:

> That band is 156.2475 - 174.00 MARITIME MOBILE Maritime (80), Private Land
> Mobile (90), Public Mobile (22), FIXED/LAND MOBILE (2)(3) Auxiliary
> Broadcasting (74),
>
>
>
> Dennis M. Wage
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
> On Tue, Mar 27, 2018 at 12:44 PM, Tycen Stafford <tycen at tycen.com> wrote:
>
>> I believe this is what you want - but I'd love to have someone confirm:
>>
>>
>>
>>
>> The CSV is attached (so, you might already know this, but you'll want to
>> download the stock config from your radio, then paste the two rows from
>> this CSV into the config, then re-upload it to your radio).
>>
>> You can put whatever you want in the Name column.
>>
>> You'll see what I did, but you needed to set an offset (-0.990 in this
>> case) to step down your TX frequency. Then it looks like they want a Tone
>> on your RX. And finally your mode would be NFM for narrow band.
>>
>> You can program this all on the radio without chirp and doing it for just
>> one channel wouldn't be that time consuming. So, as a backup plan I would
>> print off some good instructions for programming by hand (check out
>> Miklor's site) and practice doing it by hand so you're ready to do that in
>> case something was programmed wrong.
>>
>> If you know others going on the trip, you could ask them to share their
>> CSV file with you.
>>
>> Good luck!
>> -Tycen
>>
>>
>> On Sun, Mar 25, 2018 at 6:26 AM, Kyle <kylezlucas at gmail.com> wrote:
>>
>>> I am a newbie programming a UV-5r2+ using CHIRP.  Could you help me with
>>> how to fill in the fields in CHIRP?  I am going on a week long backcountry
>>> ski trip in British Columbia.  The operation area radio frequency given to
>>> me is attached below.  How do fill in the fields correctly listed in the
>>> screen shot of CHIRP below?  Or do I not have enough information?  I can’t
>>> figure out how to get the RX 170.100 and TX 169.110 on the same memory
>>> channel.  Then I am not sure if I am entering the tone correctly?
>>>
>>> Thank you!
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *CH*
>>>
>>> *RX*
>>>
>>> *TX*
>>>
>>> *Band*
>>>
>>> *User*
>>>
>>> *Location*
>>>
>>> *Tone - RX*
>>>
>>> *Tone - TX*
>>>
>>> 1
>>>
>>> 170.100
>>>
>>> 169.110
>>>
>>> narrow
>>>
>>> GAH
>>>
>>> Cupola Mt
>>>
>>> 100.0
>>>
>>>
>>>
>>> 2
>>>
>>> 170.100
>>>
>>>
>>>
>>> narrow
>>>
>>> GAH
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> [image: cid:image003.png at 01D3BCA3.76269ED0]
>>>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Tycen at tycen at tycen.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>>> id.danplanet.com
>>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Dennis Wage at dwage at dwage.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/d34344e3/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot 2018-03-27 10.33.55.png
Type: image/png
Size: 145914 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/d34344e3/attachment.png