[chirp_users] TSQL / CTCSS
Tom Henderson
Mon Mar 26 06:04:39 PDT 2018
If so, they shouldn't be on the repeater's output frequency having a
simplex QSO. It's also possible they were on the repeater and the
repeater doesn't pass the tone though to output, as someone mentioned
earlier.
Tom Henderson
On 03/25/2018 07:59 PM, Dennis Wage wrote:
> Jim,
>
> This much I knew. But I had it programmed correctly. So it is now
> obvious to me it was a simplex local communication and they were using
> a different tone.
>
> It's all good now. The fog is lifting.
>
> DW :)
>
> Dennis M. Wage
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net <http://hammondb3organ.net/>
> http://overdubs.net
>
> On Sun, Mar 25, 2018 at 7:43 PM, Jim Unroe <rock.unroe at gmail.com
> <mailto:rock.unroe at gmail.com>> wrote:
>
> > The other day my UV-5R was in scan mode and a repeater in Huntsville
> > continually stopped my scan with a carrier or tone, not sure
> which yet. But
> > I heard no audio. No matter where I set the squelch, even to 0 I
> got no
> > audio. However, if I hit the Moni button I could hear the guys
> talking.
> >
> > What was happening here?
>
> You have programmed a receive CTCSS tone on the frequency/channel you
> were listening to. CTCSS is a form of selective squelch. When you have
> a receive CTCSS tone programmed, only signals that are transmitting
> the matching CTCSS tone can open your squelch. Same as a repeater that
> requires tone access. If you don't transmit the matching tone, the
> repeater can't hear you.
>
> Pressing the [MONI] button overrides any programmed receive CTCSS
> tone, programmed receive DCS code and SQL setting so that you can hear
> any FM signal that is in range.
>
>
> http://www.miklor.com/COM/UV_CTCSS.php
> <http://www.miklor.com/COM/UV_CTCSS.php>
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> This message was sent to Dennis Wage at dwage at dwage.com
> <mailto:dwage at dwage.com>
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KM4UQB at tom at henderson4.us
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180326/117e892b/attachment.html
More information about the chirp_users
mailing list