[chirp_users] DCS problem on BTECH UVX2-50
jchuillier at free.fr
Sun Jun 17 22:13:05 PDT 2018
This is not stricly Chirp related but I need you help on programming my
radios with selective DCS.
I use the radios in a car racing team and I need to be abe to talk to this
car or that car but also to all the cars at the same time.
I have made a setup which runs fine to speak to each car individualy but I
can't talk to all of them at the same time, here's what I did.
Same frequency for all channels
DCS RX specific to each car (X for car 1, Y for car 2, etc.....)
No DCS TX on the cars radios so that when the driver speaks everyone car
hear it (except the other cars of course)
I made several channels on the pit radios with a matching DCS TX for car
1, car 2 and no DCS at all to be able to talk to the other pits radios)
I'd like to make a new DCS RX on all cars (200) so that I could talk to
ALL cars at the same time but when I program it on the cars radios it does
not work, the car does not receive it.
I made a dual watch so that the car receiving radio should switch from the
"this car only" channel to the "all cars channel" but somehow it does not
What did I do wrong ?
Thanks for the help
More information about the chirp_users