[chirp_users] Mac to Vaesu communication problem

Mary Graff megraff at gmail.com
Mon Jul 9 15:04:29 PDT 2018


I also use a Mac and have a Yeasu 7900R & FT60R both communicate well, but I did have to install the RT driver which then shows an additional com port. I did find in my case, I think because of the lighting ports and using a lightening to USB connector cable I have to use 2 different physical ports for the 2 different radios.
On the RTsystems inc website click on support then on the right select Yeasu Prolific driver

Good luck,
Mary
KM6RMA

Sent from my iPad

> On Jul 9, 2018, at 1:51 PM, Bruce Warren <bruce at sendlgm.com> wrote:
> 
> I am using a Mac with OS 10.6.8. I want to use Chirp to communicate with a Yaesu VX-6R. 
> 
> I have a USB cable from RT Systems specifically designated for the Yaesu. I installed the driver and my computer says it recognizes the USB cable.
> 
> I installed a version of Chirp and it does not crash. When I try to download from my radio using Command-D, I get a window for selecting the Port, Vendor, and model. Under the choice for Port, I get two options: "/dev/cu.Bluetooth-PDA-Sync" and "/dev/cu.Bluetooth-Modem". When I try with "/dev/cu.Bluetooth-Modem", it immediately tells me it cannot open the port. When I try with " /dev/cu.Bluetooth-PDA-Sync", it tries to do something and then errors out, saying: "Failed to communicate with the radio."
> 
> Any ideas on what is wrong or what I can do to fix it?
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mary at megraff at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



More information about the chirp_users mailing list