[chirp_users] chirp_users Digest, Vol 115, Issue 3

Brian Burke burke.n0imd at gmail.com
Thu Jul 5 12:37:00 PDT 2018


Will chirp connect to and program commercial Kenwood TK-805 radios? I have
several and always screw up the microphone programming method.

On Thu, Jul 5, 2018, 15:05 <chirp_users-request at intrepid.danplanet.com>
wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Re: chirp_users Digest, Vol 115, Issue 2 (Brian Burke)
>    2. Re: Chirp began ten years ago today... (mike-2007 at elp.rr.com)
>    3. Re: IC-92AD funnies (Chuck Hast)
>    4. Re: Chirp began ten years ago today... (Eric Oyen)
>    5. Re: IC-92AD funnies (Chuck Hast)
>    6. Re: IC-92AD funnies (Chuck Hast)
>    7. Re: chirp_users Digest, Vol 115, Issue 2 (Dennis Wage)
>    8. Re: IC-92AD funnies (Wenlock Burton)
>    9. Re: IC-92AD funnies (Chuck Hast)
>   10. Re: IC-92AD funnies (Chuck Hast)
>   11. Re: IC-92AD funnies (Wenlock Burton)
>   12. Re: IC-92AD funnies (Chuck Hast)
>   13. Using Win 10 with Chirp? (Michael Pludek)
>   14. Re: Using Win 10 with Chirp? (Jardy)
>   15. Re: Using Win 10 with Chirp? (Jim Unroe)
>   16. BF-H8FP programming (Jack Wimberly)
>   17. Re: BF-H8FP programming (Trevor Holyoak)
>   18. Re: BF-H8FP programming (Jim Unroe)
>   19. Re: BF-H8FP programming (Chance Fulton)
>   20. Re: BF-H8FP programming (Dennis Wage)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 4 Jul 2018 15:13:56 -0400
> From: Brian Burke <burke.n0imd at gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 115, Issue 2
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAL8isAh6=
> M_9qLWVKXjed9EsbhOJH9tyapV3ApTA0kqZXkkikw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Any chance this software will work with a commercial Kenwood TK-805?
>
> On Wed, Jul 4, 2018, 15:05 <chirp_users-request at intrepid.danplanet.com>
> wrote:
>
> > Send chirp_users mailing list submissions to
> >         chirp_users at intrepid.danplanet.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > or, via email, send a message with subject or body 'help' to
> >         chirp_users-request at intrepid.danplanet.com
> >
> > You can reach the person managing the list at
> >         chirp_users-owner at intrepid.danplanet.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of chirp_users digest..."
> >
> >
> > Today's Topics:
> >
> >    1. Re: CSV Partial Load (Jean-Paul Louis)
> >    2. Re: CSV Partial Load (Aubrey Turner)
> >    3. Re: CSV Partial Load (Ken FitzGerald-Smith)
> >    4. Re: CSV Partial Load (Jim Unroe)
> >    5. Re: CSV Partial Load (Jim Unroe)
> >    6. Re: Chirp began ten years ago today... (W. T. Jones)
> >    7. Re: CSV Partial Load (Nigel A. Gunn  G8IFF/W8IFF)
> >    8. fail programming a Jetstream JT270M (Patricia Wilson)
> >    9. Re: fail programming a Jetstream JT270M (Jim Unroe)
> >   10. Re: fail programming a Jetstream JT270M (Patricia Wilson)
> >   11. Re: CSV Partial Load (Dennis Wage)
> >   12. Re: Chirp began ten years ago today... (Chuck Hast)
> >   13. Re: Chirp began ten years ago today... (mike-2007 at elp.rr.com)
> >   14. Re: Chirp began ten years ago today... (Dennis Wage)
> >   15. How to empty or null tone channel in Chirp?
> >       (survivor at cryptolab.net)
> >   16. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
> >   17. Re: How to empty or null tone channel in Chirp? (neil b)
> >   18. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
> >   19. Re: How to empty or null tone channel in Chirp? (Jim Unroe)
> >   20. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
> >   21. IC-92AD funnies (Chuck Hast)
> >   22. Re: IC-92AD funnies (Chuck Hast)
> >   23. Re: Chirp began ten years ago today... (BobJ)
> >   24. Re: Chirp began ten years ago today... (Dennis Wage)
> >   25. Re: Chirp began ten years ago today... (Glenn Ervin)
> >   26. Re: Chirp began ten years ago today...
> >       (Nigel A. Gunn  G8IFF/W8IFF)
> >   27. Re: Chirp began ten years ago today... (Chuck Hast)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 3 Jul 2018 15:02:06 -0400
> > From: Jean-Paul Louis <louijp at yahoo.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID: <0BE7A004-925C-4FE2-9218-364F1C569DC5 at yahoo.com>
> > Content-Type: text/plain;       charset=utf-8
> >
> > I think that you have a problem with the NAMES of the channels. NAMES
> > should not have a space as this break the rules of CSV files.
> > Try replacing the spaces with ?_? and that might work a lot better.
> >
> > Just my $0.02,
> > Jean-Paul
> > N1JPL
> >
> >
> > > On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> > >
> > > I just trimmed off all the punctuation spaces and made names 8
> > characters or less.  Same problem, it imports and shows channels 0-34
> fine
> > but stops at 34 with errors:
> > >
> > > Line 35: [rtone] could not convert string to float:
> > >
> > > Line 36: [rtone] could not convert string to float:
> > >
> > > Line 37: [rtone] could not convert string to float:
> > >
> > > Line 38: [rtone] could not convert string to float:
> > > ...
> > >
> > > to the end of the list just after channel 70cm Cal:
> > >
> > > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> > >
> > > Something is happening here between 33 and 34.
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Jean-Paul Louis at louijp at yahoo.com
> > > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Tue, 3 Jul 2018 14:14:38 -0500
> > From: Aubrey Turner <aubrey.c.turner at gmail.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID: <d1ef62fc-1577-2d63-54aa-81ca27a15c02 at gmail.com>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > Actually, spaces are allowed in CSVs (in general just about everything
> > other than a COMMA is fine since it's the comma that separates the
> > fields).? And, we see that line 33 is loading (which also has a space).
> >
> > What I am seeing, however, is a lot more empty fields in line 34 than in
> > the previous lines.? In particular, the warning from Chirp is for the
> > 'rtone' column that it can't convert the string to a float.? In line 33
> > this appears to have a value of 88.5 while it's empty on line 34.? I
> > suggest looking at the values for the tone columns to see why these are
> > blank (and/or why Chirp is expecting a value there).
> >
> > I also see from the history of this email chain that? you're using Excel
> > to edit the CSV.? Excel is notorious for munging CSV files. You may want
> > to use a text editor of some kind instead of Excel to make sure that the
> > fields aren't getting messed up when the file is saved.
> >
> >
> > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
> > > I think that you have a problem with the NAMES of the channels. NAMES
> > should not have a space as this break the rules of CSV files.
> > > Try replacing the spaces with ?_? and that might work a lot better.
> > >
> > > Just my $0.02,
> > > Jean-Paul
> > > N1JPL
> > >
> > >
> > >> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> > >>
> > >> I just trimmed off all the punctuation spaces and made names 8
> > characters or less.  Same problem, it imports and shows channels 0-34
> fine
> > but stops at 34 with errors:
> > >>
> > >> Line 35: [rtone] could not convert string to float:
> > >>
> > >> Line 36: [rtone] could not convert string to float:
> > >>
> > >> Line 37: [rtone] could not convert string to float:
> > >>
> > >> Line 38: [rtone] could not convert string to float:
> > >> ...
> > >>
> > >> to the end of the list just after channel 70cm Cal:
> > >>
> > >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> > >>
> > >> Something is happening here between 33 and 34.
> > >> _______________________________________________
> > >> chirp_users mailing list
> > >> chirp_users at intrepid.danplanet.com
> > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >> This message was sent to Jean-Paul Louis at louijp at yahoo.com
> > >> To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> > > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 3 Jul 2018 20:45:05 +0100
> > From: Ken FitzGerald-Smith <ei7dkb at logicatrium.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID: <36A3E9FC-E5A6-4A73-A05B-D53EBA681348 at logicatrium.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > He needs values for all these fields in  your csv file: rToneFreq,
> > cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep
> >
> > rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do
> >
> > DtcsCode needs to be valid too. First valid code is 023
> >
> > DtcsPolarity needs to be one of  [?NN', 'NR', 'RN', 'RR']
> >
> > Mode needs to be AM or FM at least
> >
> > TStep (tuning step) needs to be numeric! Zero will do
> >
> > So this:
> >
> > 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,,
> >
> > Needs to become this at a minimum:
> >
> > 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,,
> >
> > There is no problem with the / in the name, but remember if you see a
> > conversion error like  ?String to Float? for any field, that indicates
> that
> > you must supply at least a numeric value, not an empty field.
> >
> > I hope this helps
> >
> > Ken
> >
> > > On 3 Jul 2018, at 20:14, Aubrey Turner <aubrey.c.turner at gmail.com>
> > wrote:
> > >
> > > Actually, spaces are allowed in CSVs (in general just about everything
> > > other than a COMMA is fine since it's the comma that separates the
> > > fields).  And, we see that line 33 is loading (which also has a space).
> > >
> > > What I am seeing, however, is a lot more empty fields in line 34 than
> in
> > > the previous lines.  In particular, the warning from Chirp is for the
> > > 'rtone' column that it can't convert the string to a float.  In line 33
> > > this appears to have a value of 88.5 while it's empty on line 34.  I
> > > suggest looking at the values for the tone columns to see why these are
> > > blank (and/or why Chirp is expecting a value there).
> > >
> > > I also see from the history of this email chain that  you're using
> Excel
> > > to edit the CSV.  Excel is notorious for munging CSV files. You may
> want
> > > to use a text editor of some kind instead of Excel to make sure that
> the
> > > fields aren't getting messed up when the file is saved.
> > >
> > >
> > > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
> > >> I think that you have a problem with the NAMES of the channels. NAMES
> > should not have a space as this break the rules of CSV files.
> > >> Try replacing the spaces with ?_? and that might work a lot better.
> > >>
> > >> Just my $0.02,
> > >> Jean-Paul
> > >> N1JPL
> > >>
> > >>
> > >>> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> > >>>
> > >>> I just trimmed off all the punctuation spaces and made names 8
> > characters or less.  Same problem, it imports and shows channels 0-34
> fine
> > but stops at 34 with errors:
> > >>>
> > >>> Line 35: [rtone] could not convert string to float:
> > >>>
> > >>> Line 36: [rtone] could not convert string to float:
> > >>>
> > >>> Line 37: [rtone] could not convert string to float:
> > >>>
> > >>> Line 38: [rtone] could not convert string to float:
> > >>> ...
> > >>>
> > >>> to the end of the list just after channel 70cm Cal:
> > >>>
> > >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> > >>>
> > >>> Something is happening here between 33 and 34.
> > >>> _______________________________________________
> > >>> chirp_users mailing list
> > >>> chirp_users at intrepid.danplanet.com
> > >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >>> This message was sent to Jean-Paul Louis at louijp at yahoo.com
> > >>> To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > >> _______________________________________________
> > >> chirp_users mailing list
> > >> chirp_users at intrepid.danplanet.com
> > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> > <mailto:aubrey.c.turner at gmail.com>
> > >> To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
> > chirp_users-unsubscribe at intrepid.danplanet.com>
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com <mailto:
> > chirp_users at intrepid.danplanet.com>
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > > This message was sent to Bitfarmer at ei7dkb at logicatrium.com <mailto:
> > ei7dkb at logicatrium.com>
> > > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
> > chirp_users-unsubscribe at intrepid.danplanet.com>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/0a00f7b4/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 3 Jul 2018 16:38:21 -0400
> > From: Jim Unroe <rock.unroe at gmail.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <CADnO8U52HAgcL8EQacRgwrpf+1HtasvyyF=
> > yW50_PnF6LodMyw at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Well one thing is starting at 34 you removed the default values for
> > Tone, ToneSql, DTCS Code, DTCS Rx Code and DTCS Pol. They should be
> > there even if they are not used. The Tone Mode value determines if
> > they are used or not. And it looks like it is missing from all the
> > memory rows.
> >
> > Jim
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 3 Jul 2018 16:43:25 -0400
> > From: Jim Unroe <rock.unroe at gmail.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <
> > CADnO8U6DjF8C_vMKArWksq0A2HW4mSDdYbs1VN3jr0BaaUo-aA at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >
> > Program memory 31 using the CHIRP UI and then export it to a CSV file.
> > That is what the others need to look like.
> >
> > Jim
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Tue, 3 Jul 2018 18:53:17 -0400
> > From: "W. T. Jones" <wn3lif at gmail.com>
> > Subject: Re: [chirp_users] Chirp began ten years ago today...
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <CA+M-Wc_sa1=
> > Rt880xOsggM3m-1PP2HRT4dcKxPy5GbZBELcxag at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Thanks to All that made Chirp possible! Never knew there were so many.
> >
> >
> >
> > Regards,
> >
> > WT
> > Real heroes do not wear capes. They wear dog tags, turnout gear, and
> > badges!
> >
> > On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
> >
> > >
> > >
> > > *Thank you* to Team CHIRP.
> > > An invaluable service to the Amateur Radio community.
> > >
> > > John  ?Miklor?   K3NXU
> > >
> > > http://www.miklor.com
> > >
> > > http://www.miklor.com/DMR/
> > >
> > >
> > >
> > >
> > >
> > > *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> > > chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
> > > *Sent:* Tuesday, July 3, 2018 2:32 PM
> > >
> > > *To:* Discussion of CHIRP
> > > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> > >
> > >
> > >
> > > *yes this program has saved a lot of hours*
> > >
> > > *thanks for it*
> > >
> > >
> > >
> > > *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,
> SKYWARN
> > > 128A*
> > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > *From:* chirp_users-bounces at intrepid.danplanet.com <
> > > chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman
> Sebern <
> > > nsebern14 at gmail.com>
> > > *Sent:* Tuesday, July 3, 2018 10:38 AM
> > > *To:* Discussion of CHIRP
> > > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> > >
> > >
> > >
> > > Thank YOU.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
> > >
> > > Congratulations on reaching your 10 year milestone with such a great
> > piece
> > > of software!
> > > As a fairly new Ham, it's made my life a lot easier.
> > > Thank you!
> > >
> > > 73s
> > > Frank
> > > K1HLZ
> > >
> > > On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com>
> wrote:
> > >
> > > Hi all,
> > >
> > > I just wanted to share a milestone in the CHIRP project with the
> > community. Ten years ago today, on July 3rd 2008, I made the first commit
> > to the repository which started the chirp project:
> > >
> > >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
> > >
> > > It was just a rough bit of code that could talk to an Icom IC-92AD and
> I
> > was apparently thinking of calling it "repidr". I do not recall what that
> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> > >
> > >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
> > >
> > > By July 19th, I was ready to make something available, which was just
> > able to read and write CSV files, and talk to Icom IC-9x radios and the
> > ID-800H. This was the first version 0.1.1:
> > >
> > >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
> > >
> > > I still remember the large stack of paper on the corner of my desk
> where
> > I had written out tons of hex, all in pencil, erased and re-written many
> > times, trying to decode the first few radio memories and looking for
> > patterns to make it easier.
> > >
> > > The project has come a long way since then, largely due to the help and
> > involvement of other volunteers and users. While the first release
> > supported two radio models, the latest one supports 228 distinct models,
> > with more if you count the many clones that exist. The users mailing list
> > has a fairly amazing 2892 people subscribed, from all over the world,
> > representing a tiny fraction of the total user base.
> > >
> > > So, I just want to thank all the people who have made CHIRP possible
> and
> > successful. Especially contributors of code, bug reports, and test
> reports,
> > but also people who have spent hours on this list helping others and
> being
> > the support system that allows volunteer developers to focus on what they
> > do best. Thanks to anyone who has ever sent a donation, as well as the
> > commercial outfits who have contributed radios and other help. There are
> > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
> > that come to mind as having a substantial impact.
> > >
> > > At the end of this email is a very rough list of all the code
> > contributors to the project, extracted from the repository with minimal
> > attempts to squash some duplicates. These are the rock stars that have
> > gotten us to where we are today, so please join me in thanking them for
> > spending their nights and weekends making this project the success that
> it
> > is today!
> > >
> > > --Dan
> > >
> > >
> > > Commits Contributor
> > > -------|
> > >
> > > ------------------------------
> > >
> > >
> > >    1865 Dan Smith
> > >     240 Jim Unroe
> > >     189 Tom Hayward
> > >     188 Marco Filippi
> > >     137 Zach Welch
> > >      59 Jens Jensen
> > >      58 Pavel Milanes (CO7WT)
> > >      26 K. Arvanitis
> > >      15 Tyler Tidman
> > >      12 Richard Cochran
> > >      10 Dan Drogichen
> > >       8 Sean Burford
> > >       8 Rick Farina
> > >       8 Michael Wagner
> > >       8 Eric Allen
> > >       8 Brian Dickman
> > >       7 SASANO Takayoshi
> > >       6 Vernon Mauery
> > >       6 Ron Wellsted
> > >       6 Rhett Robinson
> > >       6 Ray Cielencki
> > >       5 Rick DeWitt
> > >       5 Keith Williamson
> > >       4 Tim Smith
> > >       4 Nicolas Pike
> > >       4 Mathias Weyland
> > >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> > >       4 David Griffith
> > >       4 Chris Fosnight
> > >       4 Angus Ainslie
> > >       4 Alexey K
> > >       3 Rick Farina
> > >       3 Leo B?rring
> > >       3 Jon K Hellan
> > >       3 Christopher Hoover
> > >       3 Ben Smith
> > >       2 Richard Birch
> > >       2 Nathan Crapo
> > >       2 Michal Demin
> > >       2 Louie Ilievski
> > >       2 Johan Adler
> > >       2 Dean Gibson
> > >       2 Cody P Schafer
> > >       1 Windsor Schmidt
> > >       1 Wade Simmons
> > >       1 Stuart Tener
> > >       1 Steve Conklin
> > >       1 Ryan Tourge K2RRT x
> > >       1 Robert Terzi
> > >       1 Robert Morris
> > >       1 Patrik Nilsson
> > >       1 nytowl
> > >       1 Nolan Darilek
> > >       1 nicolas jon pike
> > >       1 Mike Pittaro
> > >       1 Michal D
> > >       1 Michael Lippold
> > >       1 Mark Adams
> > >       1 loudawgucr at gmail.com
> > >       1 Krystian SP6IT
> > >       1 kc1ckh at arrl.net
> > >       1 Jeremy McDermond
> > >       1 James Lee N1DDK
> > >       1 Imuli
> > >       1 Eric Dropps
> > >       1 Ed Santiago
> > >       1 Declan Rieb
> > >       1 David Fannin
> > >       1 Dave Allan
> > >       1 Dale Tyler
> > >       1 Charles Stewart
> > >       1 Brett Bump
> > >       1 Brad Ackerman
> > >       1 Attilio Pannella
> > >       1 Andrew
> > >       1 Adam Coddington
> > >       1 ac2lq
> > >       1 Aaron Pelly
> > >
> > > ------------------------------
> > >
> > >
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to FRANK G at k1hlz at pcicon.net
> > > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > >
> > >
> > > --
> > > Sent from my Android device with K-9 Mail. Please excuse my brevity.
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Norman Sebern at nsebern14 at gmail.com
> > > To unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to WT at wn3lif at gmail.com
> > > To unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/ea5689fe/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Tue, 3 Jul 2018 19:08:19 -0400 (EDT)
> > From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel at ngunn.net>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,
> >         imatglamis <imatglamis at gmail.com>
> > Message-ID: <677469876.85416.1530659299549 at email.1and1.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Your frequency doesn't conform to an acceptable frequency step?
> >
> >
> > > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
> > >
> > >     I just trimmed off all the punctuation spaces and made names 8
> > characters or less.  Same problem, it imports and shows channels 0-34
> fine
> > but stops at 34 with errors:
> > >
> > >     Line 35: [rtone] could not convert string to float:
> > >
> > >     Line 36: [rtone] could not convert string to float:
> > >
> > >     Line 37: [rtone] could not convert string to float:
> > >
> > >     Line 38: [rtone] could not convert string to float:
> > >     ...
> > >
> > >     to the end of the list just after channel 70cm Cal:
> > >
> > >     31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >     32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >     33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > >     34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > >     35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > >     36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> > >
> > >     Something is happening here between 33 and 34.
> > >     _______________________________________________
> > >     chirp_users mailing list
> > >     chirp_users at intrepid.danplanet.com
> > >     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > >     To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > >
> >
> >
> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
> 937
> > 825 5032
> > Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
> > http://www.ngunn.net
> > Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> > International #385,
> > Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/28a00e15/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Tue, 3 Jul 2018 16:30:34 -0700
> > From: Patricia Wilson <wilson.pr.gm at gmail.com>
> > Subject: [chirp_users] fail programming a Jetstream JT270M
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID:
> >         <CAAwRy+ROdfSYwuKNceArVo3WsCOi+zCQTnr8bn9zrdrb=
> > nZNVA at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > I am attempting to program a Jetstream JT270M using a Prolific cable.
> >
> > The CHIRP Error message pop-up says
> >
> > An error has occurred
> > could not open com4 (Error 2) The system can not find the file specified.
> >
> > In the WIN10 Device manager listing for COM4 it says
> > Driver provide is prolific
> > Date is 10-17-2017
> > Version is 3.8.18.0
> >
> > Device status is
> > This device cannot start. (Code 10)
> > A device which does not exist was specified.
> >
> > Can anyone help me out with this?
> >
> >
> >
> >
> > --
> >
> > Patricia Wilson
> > Apache Junction, AZ
> > Member NRA, ARRL
> > WB8DXX (Extra)
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/b3a2feed/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Tue, 3 Jul 2018 19:39:39 -0400
> > From: Jim Unroe <rock.unroe at gmail.com>
> > Subject: Re: [chirp_users] fail programming a Jetstream JT270M
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <
> > CADnO8U5mLqAqAvcaHt8ZAJ_24ZWCzQqxK4GZ0cKruK39jvMaEg at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > > The CHIRP Error message pop-up says
> > >
> > > An error has occurred
> > > could not open com4 (Error 2) The system can not find the file
> specified.
> > >
> > > In the WIN10 Device manager listing for COM4 it says
> > > Driver provide is prolific
> > > Date is 10-17-2017
> > > Version is 3.8.18.0
> > >
> > > Device status is
> > > This device cannot start. (Code 10)
> > > A device which does not exist was specified.
> > >
> > > Can anyone help me out with this?
> >
> > This is a common problem, You must download, install and select an
> > older Prolific device driver (V3.2.0.0 ). This page has a link to the
> > device driver and instructions for installing it.
> >
> > http://www.miklor.com/COM/UV_Drivers.php
> >
> > Jim KC9HI
> >
> >
> > ------------------------------
> >
> > Message: 10
> > Date: Tue, 3 Jul 2018 17:27:20 -0700
> > From: Patricia Wilson <wilson.pr.gm at gmail.com>
> > Subject: Re: [chirp_users] fail programming a Jetstream JT270M
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID:
> >         <CAAwRy+Tp69WhocVuPLVtTjRHA+sD1Dxb3WcG=
> > y-mEbN7nnV0uw at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > I had tried that and somehow screwed up. This time around SUCCESS!!!
> Thank
> > you ever so much and
> >
> > CONGRATS to Dan on the 10th anniversary.
> >
> > On Tue, Jul 3, 2018 at 4:40 PM Jim Unroe <rock.unroe at gmail.com> wrote:
> >
> > > > The CHIRP Error message pop-up says
> > > >
> > > > An error has occurred
> > > > could not open com4 (Error 2) The system can not find the file
> > specified.
> > > >
> > > > In the WIN10 Device manager listing for COM4 it says
> > > > Driver provide is prolific
> > > > Date is 10-17-2017
> > > > Version is 3.8.18.0
> > > >
> > > > Device status is
> > > > This device cannot start. (Code 10)
> > > > A device which does not exist was specified.
> > > >
> > > > Can anyone help me out with this?
> > >
> > > This is a common problem, You must download, install and select an
> > > older Prolific device driver (V3.2.0.0 ). This page has a link to the
> > > device driver and instructions for installing it.
> > >
> > > http://www.miklor.com/COM/UV_Drivers.php
> > >
> > > Jim KC9HI
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Patricia Wilson at wilson.pr.gm at gmail.com
> > > To unsubscribe, send an email to
> > > chirp_users-unsubscribe at intrepid.danplanet.com
> > >
> >
> >
> > --
> >
> > Patricia Wilson
> > Apache Junction, AZ
> > Member NRA, ARRL
> > WB8DXX (Extra)
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/93a7464e/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 11
> > Date: Tue, 3 Jul 2018 22:12:41 -0500
> > From: Dennis Wage <dwage at dwage.com>
> > Subject: Re: [chirp_users] CSV Partial Load
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <
> > CAE1d062WotJGkESaQTQ0RqwQxy_hCh8L-xU52YWUAXVg667XzQ at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > ??
> > Columns G, H, I, J, and L require data be in the CSV file. Of these
> columns
> > some will produce a Chirp error but if you continue Chirp will kindly
> fill
> > in dummy data. And some of the columns require data, that if not there
> will
> > stop the import.
> > I just don't have time to research and tell you which. But simply put,
> put
> > data in all fields.
> >
> > This will work:
> > 88.5 88.5 23 NN FM 5 and so will this:
> > 67 67 23 NN FM 5
> > Your rTone on channel 57, line 58 is wrong too.
> >
> > Dennis M. Wage (W9BOQ)
> >
> > 245 Corum Hill Road
> > Castalian Springs, TN 37031
> > (615) 310-4242 Cell
> > (615) 562-5128 Home
> > http://hammondb3organ.net
> > http://overdubs.net
> >
> > On Tue, Jul 3, 2018 at 6:08 PM, Nigel A. Gunn G8IFF/W8IFF <
> nigel at ngunn.net
> > >
> > wrote:
> >
> > > Your frequency doesn't conform to an acceptable frequency step?
> > >
> > >
> > > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
> > >
> > > I just trimmed off all the punctuation spaces and made names 8
> characters
> > > or less.  Same problem, it imports and shows channels 0-34 fine but
> stops
> > > at 34 with errors:
> > >
> > > Line 35: [rtone] could not convert string to float:
> > >
> > > Line 36: [rtone] could not convert string to float:
> > >
> > > Line 37: [rtone] could not convert string to float:
> > >
> > > Line 38: [rtone] could not convert string to float:
> > > ...
> > >
> > > to the end of the list just after channel 70cm Cal:
> > >
> > > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> > >
> > > Something is happening here between 33 and 34.
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > > To unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > >
> > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
> > 937
> > > 825 5032
> > > Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net
> www
> > > http://www.ngunn.net
> > > Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> > > International #385,
> > > Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Dennis Wage at dwage at dwage.com
> > > To unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/c4cdd456/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 12
> > Date: Tue, 3 Jul 2018 23:51:12 -0500
> > From: Chuck Hast <kp4djt at gmail.com>
> > Subject: Re: [chirp_users] Chirp began ten years ago today...
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <
> > CAN9xdP80-orjA2bSoXvSeMaGkD_SwiDLzEbUwc8bb40FNEDQtg at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Dan,
> > First a big hat off to you and all on that list for the great work and
> > piece of art.
> > It is funny, I was working in Kalama WA in a newly opened glass plant,
> the
> > company that
> > I worked for had sold them the fore hearths and glass container
> inspection
> > machines. My
> > job was to bring those machines on line and then train and shepherd those
> > folks in the
> > inspections of the bottles. I had tons of overtime so I toddled down to
> HRO
> > in PDX and
> > got me a 92AT. That was I think in late Aug 2008 or Sept. I know it had
> not
> > started raining
> > yet and the weather was still good. It was one of the folks at HRO that
> > aimed me your
> > direction I believe it was. I did not know that the project was that
> new. I
> > do not remember
> > when I downloaded the first code, but it worked on that 92AT (I still
> have
> > it).
> >
> > By way I now live in Oklahoma, but I sure miss the NW...
> >
> > Looks like I joined the list on 20 Jun 2009.
> >
> > On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <wn3lif at gmail.com> wrote:
> >
> > > Thanks to All that made Chirp possible! Never knew there were so many.
> > >
> > >
> > >
> > > Regards,
> > >
> > > WT
> > > Real heroes do not wear capes. They wear dog tags, turnout gear, and
> > > badges!
> > >
> > > On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
> > >
> > >>
> > >>
> > >> *Thank you* to Team CHIRP.
> > >> An invaluable service to the Amateur Radio community.
> > >>
> > >> John  ?Miklor?   K3NXU
> > >>
> > >> http://www.miklor.com
> > >>
> > >> http://www.miklor.com/DMR/
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> > >> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
> > >> *Sent:* Tuesday, July 3, 2018 2:32 PM
> > >>
> > >> *To:* Discussion of CHIRP
> > >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> > >>
> > >>
> > >>
> > >> *yes this program has saved a lot of hours*
> > >>
> > >> *thanks for it*
> > >>
> > >>
> > >>
> > >> *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,
> > >> SKYWARN 128A*
> > >>
> > >>
> > >>
> > >>
> > >> ------------------------------
> > >>
> > >> *From:* chirp_users-bounces at intrepid.danplanet.com <
> > >> chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman
> Sebern
> > <
> > >> nsebern14 at gmail.com>
> > >> *Sent:* Tuesday, July 3, 2018 10:38 AM
> > >> *To:* Discussion of CHIRP
> > >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> > >>
> > >>
> > >>
> > >> Thank YOU.
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
> > >>
> > >> Congratulations on reaching your 10 year milestone with such a great
> > >> piece of software!
> > >> As a fairly new Ham, it's made my life a lot easier.
> > >> Thank you!
> > >>
> > >> 73s
> > >> Frank
> > >> K1HLZ
> > >>
> > >> On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com>
> wrote:
> > >>
> > >> Hi all,
> > >>
> > >> I just wanted to share a milestone in the CHIRP project with the
> > community. Ten years ago today, on July 3rd 2008, I made the first commit
> > to the repository which started the chirp project:
> > >>
> > >>
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
> > >>
> > >> It was just a rough bit of code that could talk to an Icom IC-92AD and
> > I was apparently thinking of calling it "repidr". I do not recall what
> that
> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> > >>
> > >>
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
> > >>
> > >> By July 19th, I was ready to make something available, which was just
> > able to read and write CSV files, and talk to Icom IC-9x radios and the
> > ID-800H. This was the first version 0.1.1:
> > >>
> > >>
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
> > >>
> > >> I still remember the large stack of paper on the corner of my desk
> > where I had written out tons of hex, all in pencil, erased and re-written
> > many times, trying to decode the first few radio memories and looking for
> > patterns to make it easier.
> > >>
> > >> The project has come a long way since then, largely due to the help
> and
> > involvement of other volunteers and users. While the first release
> > supported two radio models, the latest one supports 228 distinct models,
> > with more if you count the many clones that exist. The users mailing list
> > has a fairly amazing 2892 people subscribed, from all over the world,
> > representing a tiny fraction of the total user base.
> > >>
> > >> So, I just want to thank all the people who have made CHIRP possible
> > and successful. Especially contributors of code, bug reports, and test
> > reports, but also people who have spent hours on this list helping others
> > and being the support system that allows volunteer developers to focus on
> > what they do best. Thanks to anyone who has ever sent a donation, as well
> > as the commercial outfits who have contributed radios and other help.
> There
> > are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a
> > few that come to mind as having a substantial impact.
> > >>
> > >> At the end of this email is a very rough list of all the code
> > contributors to the project, extracted from the repository with minimal
> > attempts to squash some duplicates. These are the rock stars that have
> > gotten us to where we are today, so please join me in thanking them for
> > spending their nights and weekends making this project the success that
> it
> > is today!
> > >>
> > >> --Dan
> > >>
> > >>
> > >> Commits Contributor
> > >> -------|
> > >>
> > >> ------------------------------
> > >>
> > >>
> > >>    1865 Dan Smith
> > >>     240 Jim Unroe
> > >>     189 Tom Hayward
> > >>     188 Marco Filippi
> > >>     137 Zach Welch
> > >>      59 Jens Jensen
> > >>      58 Pavel Milanes (CO7WT)
> > >>      26 K. Arvanitis
> > >>      15 Tyler Tidman
> > >>      12 Richard Cochran
> > >>      10 Dan Drogichen
> > >>       8 Sean Burford
> > >>       8 Rick Farina
> > >>       8 Michael Wagner
> > >>       8 Eric Allen
> > >>       8 Brian Dickman
> > >>       7 SASANO Takayoshi
> > >>       6 Vernon Mauery
> > >>       6 Ron Wellsted
> > >>       6 Rhett Robinson
> > >>       6 Ray Cielencki
> > >>       5 Rick DeWitt
> > >>       5 Keith Williamson
> > >>       4 Tim Smith
> > >>       4 Nicolas Pike
> > >>       4 Mathias Weyland
> > >>       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> > >>       4 David Griffith
> > >>       4 Chris Fosnight
> > >>       4 Angus Ainslie
> > >>       4 Alexey K
> > >>       3 Rick Farina
> > >>       3 Leo B?rring
> > >>       3 Jon K Hellan
> > >>       3 Christopher Hoover
> > >>       3 Ben Smith
> > >>       2 Richard Birch
> > >>       2 Nathan Crapo
> > >>       2 Michal Demin
> > >>       2 Louie Ilievski
> > >>       2 Johan Adler
> > >>       2 Dean Gibson
> > >>       2 Cody P Schafer
> > >>       1 Windsor Schmidt
> > >>       1 Wade Simmons
> > >>       1 Stuart Tener
> > >>       1 Steve Conklin
> > >>       1 Ryan Tourge K2RRT x
> > >>       1 Robert Terzi
> > >>       1 Robert Morris
> > >>       1 Patrik Nilsson
> > >>       1 nytowl
> > >>       1 Nolan Darilek
> > >>       1 nicolas jon pike
> > >>       1 Mike Pittaro
> > >>       1 Michal D
> > >>       1 Michael Lippold
> > >>       1 Mark Adams
> > >>       1 loudawgucr at gmail.com
> > >>       1 Krystian SP6IT
> > >>       1 kc1ckh at arrl.net
> > >>       1 Jeremy McDermond
> > >>       1 James Lee N1DDK
> > >>       1 Imuli
> > >>       1 Eric Dropps
> > >>       1 Ed Santiago
> > >>       1 Declan Rieb
> > >>       1 David Fannin
> > >>       1 Dave Allan
> > >>       1 Dale Tyler
> > >>       1 Charles Stewart
> > >>       1 Brett Bump
> > >>       1 Brad Ackerman
> > >>       1 Attilio Pannella
> > >>       1 Andrew
> > >>       1 Adam Coddington
> > >>       1 ac2lq
> > >>       1 Aaron Pelly
> > >>
> > >> ------------------------------
> > >>
> > >>
> > >> chirp_users mailing list
> > >> chirp_users at intrepid.danplanet.com
> > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >> This message was sent to FRANK G at k1hlz at pcicon.net
> > >> To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > >>
> > >>
> > >> --
> > >> Sent from my Android device with K-9 Mail. Please excuse my brevity.
> > >>
> > >> _______________________________________________
> > >> chirp_users mailing list
> > >> chirp_users at intrepid.danplanet.com
> > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >> This message was sent to Norman Sebern at nsebern14 at gmail.com
> > >> To unsubscribe, send an email to
> > >> chirp_users-unsubscribe at intrepid.danplanet.com
> > >>
> > >>
> > >> _______________________________________________
> > >> chirp_users mailing list
> > >> chirp_users at intrepid.danplanet.com
> > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > >> This message was sent to WT at wn3lif at gmail.com
> > >> To unsubscribe, send an email to
> > >> chirp_users-unsubscribe at intrepid.danplanet.com
> > >>
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Chuck Hast at kp4djt at gmail.com
> > > To unsubscribe, send an email to
> > > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> >
> >
> > --
> > Chirp + Editcp + MD380Tools on Linux
> > Celestial!!!
> > Chuck -- KP4DJT
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/4a16ee0c/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 13
> > Date: Wed, 4 Jul 2018 06:24:13 -0600
> > From: <mike-2007 at elp.rr.com>
> > Subject: Re: [chirp_users] Chirp began ten years ago today...
> > To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> > Message-ID: <009e01d41391$ed23a970$c76afc50$@elp.rr.com>
> > Content-Type: text/plain;       charset="utf-8"
> >
> > Congratulations, and thanks for all the hard work.  Few will actually
> > realize the dedication it takes to do this for 10 years, and without
> profit.
> >
> > Vy73 ? Mike ? KD5KC
> > El Paso, Texas ? DM61rt
> >
> >
> >
> > -----Original Message-----
> > From: chirp_users-bounces at intrepid.danplanet.com <
> > chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
> > Sent: Tuesday, July 3, 2018 7:25 AM
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Subject: [chirp_users] Chirp began ten years ago today...
> >
> > Hi all,
> >
> > I just wanted to share a milestone in the CHIRP project with the
> > community. Ten years ago today, on July 3rd 2008, I made the first commit
> > to the repository which started the chirp project:
> >
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
> >
> > It was just a rough bit of code that could talk to an Icom IC-92AD and I
> > was apparently thinking of calling it "repidr". I do not recall what that
> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> >
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
> >
> > By July 19th, I was ready to make something available, which was just
> able
> > to read and write CSV files, and talk to Icom IC-9x radios and the
> ID-800H.
> > This was the first version 0.1.1:
> >
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
> >
> > I still remember the large stack of paper on the corner of my desk where
> I
> > had written out tons of hex, all in pencil, erased and re-written many
> > times, trying to decode the first few radio memories and looking for
> > patterns to make it easier.
> >
> > The project has come a long way since then, largely due to the help and
> > involvement of other volunteers and users. While the first release
> > supported two radio models, the latest one supports 228 distinct models,
> > with more if you count the many clones that exist. The users mailing list
> > has a fairly amazing 2892 people subscribed, from all over the world,
> > representing a tiny fraction of the total user base.
> >
> > So, I just want to thank all the people who have made CHIRP possible and
> > successful. Especially contributors of code, bug reports, and test
> reports,
> > but also people who have spent hours on this list helping others and
> being
> > the support system that allows volunteer developers to focus on what they
> > do best. Thanks to anyone who has ever sent a donation, as well as the
> > commercial outfits who have contributed radios and other help. There are
> > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
> > that come to mind as having a substantial impact.
> >
> > At the end of this email is a very rough list of all the code
> contributors
> > to the project, extracted from the repository with minimal attempts to
> > squash some duplicates. These are the rock stars that have gotten us to
> > where we are today, so please join me in thanking them for spending their
> > nights and weekends making this project the success that it is today!
> >
> > --Dan
> >
> >
> > Commits Contributor
> > -------|--------------------------------------------------
> >    1865 Dan Smith
> >     240 Jim Unroe
> >     189 Tom Hayward
> >     188 Marco Filippi
> >     137 Zach Welch
> >      59 Jens Jensen
> >      58 Pavel Milanes (CO7WT)
> >      26 K. Arvanitis
> >      15 Tyler Tidman
> >      12 Richard Cochran
> >      10 Dan Drogichen
> >       8 Sean Burford
> >       8 Rick Farina
> >       8 Michael Wagner
> >       8 Eric Allen
> >       8 Brian Dickman
> >       7 SASANO Takayoshi
> >       6 Vernon Mauery
> >       6 Ron Wellsted
> >       6 Rhett Robinson
> >       6 Ray Cielencki
> >       5 Rick DeWitt
> >       5 Keith Williamson
> >       4 Tim Smith
> >       4 Nicolas Pike
> >       4 Mathias Weyland
> >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> >       4 David Griffith
> >       4 Chris Fosnight
> >       4 Angus Ainslie
> >       4 Alexey K
> >       3 Rick Farina
> >       3 Leo B?rring
> >       3 Jon K Hellan
> >       3 Christopher Hoover
> >       3 Ben Smith
> >       2 Richard Birch
> >       2 Nathan Crapo
> >       2 Michal Demin
> >       2 Louie Ilievski
> >       2 Johan Adler
> >       2 Dean Gibson
> >       2 Cody P Schafer
> >       1 Windsor Schmidt
> >       1 Wade Simmons
> >       1 Stuart Tener
> >       1 Steve Conklin
> >       1 Ryan Tourge K2RRT x
> >       1 Robert Terzi
> >       1 Robert Morris
> >       1 Patrik Nilsson
> >       1 nytowl
> >       1 Nolan Darilek
> >       1 nicolas jon pike
> >       1 Mike Pittaro
> >       1 Michal D
> >       1 Michael Lippold
> >       1 Mark Adams
> >       1 loudawgucr at gmail.com
> >       1 Krystian SP6IT
> >       1 kc1ckh at arrl.net
> >       1 Jeremy McDermond
> >       1 James Lee N1DDK
> >       1 Imuli
> >       1 Eric Dropps
> >       1 Ed Santiago
> >       1 Declan Rieb
> >       1 David Fannin
> >       1 Dave Allan
> >       1 Dale Tyler
> >       1 Charles Stewart
> >       1 Brett Bump
> >       1 Brad Ackerman
> >       1 Attilio Pannella
> >       1 Andrew
> >       1 Adam Coddington
> >       1 ac2lq
> >       1 Aaron Pelly
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com To
> > unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> >
> >
> > ------------------------------
> >
> > Message: 14
> > Date: Wed, 4 Jul 2018 07:48:57 -0500
> > From: Dennis Wage <dwage at dwage.com>
> > Subject: Re: [chirp_users] Chirp began ten years ago today...
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <
> > CAE1d061W+AKz-b5bv+5yKMzAAEH-5Fo_400e69OH4YjPBhAndA at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Don't be that guy. Donate now here:
> > https://chirp.danplanet.com/projects/chirp/wiki/Download
> >
> > Dennis M. Wage (W9BOQ)
> >
> > 245 Corum Hill Road
> > Castalian Springs, TN 37031
> > (615) 310-4242 Cell
> > (615) 562-5128 Home
> > http://hammondb3organ.net
> > http://overdubs.net
> >
> > On Wed, Jul 4, 2018 at 7:24 AM, <mike-2007 at elp.rr.com> wrote:
> >
> > > Congratulations, and thanks for all the hard work.  Few will actually
> > > realize the dedication it takes to do this for 10 years, and without
> > profit.
> > >
> > > Vy73 ? Mike ? KD5KC
> > > El Paso, Texas ? DM61rt
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: chirp_users-bounces at intrepid.danplanet.com <
> > > chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
> > > Sent: Tuesday, July 3, 2018 7:25 AM
> > > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > > Subject: [chirp_users] Chirp began ten years ago today...
> > >
> > > Hi all,
> > >
> > > I just wanted to share a milestone in the CHIRP project with the
> > > community. Ten years ago today, on July 3rd 2008, I made the first
> commit
> > > to the repository which started the chirp project:
> > >
> > > https://chirp.danplanet.com/projects/chirp/repository/
> > > revisions/31cfb1a376fb
> > >
> > > It was just a rough bit of code that could talk to an Icom IC-92AD and
> I
> > > was apparently thinking of calling it "repidr". I do not recall what
> that
> > > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> > >
> > > https://chirp.danplanet.com/projects/chirp/repository/
> > > revisions/646c121a847b
> > >
> > > By July 19th, I was ready to make something available, which was just
> > able
> > > to read and write CSV files, and talk to Icom IC-9x radios and the
> > ID-800H.
> > > This was the first version 0.1.1:
> > >
> > > https://chirp.danplanet.com/projects/chirp/repository/
> > > revisions/1428729c41b7
> > >
> > > I still remember the large stack of paper on the corner of my desk
> where
> > I
> > > had written out tons of hex, all in pencil, erased and re-written many
> > > times, trying to decode the first few radio memories and looking for
> > > patterns to make it easier.
> > >
> > > The project has come a long way since then, largely due to the help and
> > > involvement of other volunteers and users. While the first release
> > > supported two radio models, the latest one supports 228 distinct
> models,
> > > with more if you count the many clones that exist. The users mailing
> list
> > > has a fairly amazing 2892 people subscribed, from all over the world,
> > > representing a tiny fraction of the total user base.
> > >
> > > So, I just want to thank all the people who have made CHIRP possible
> and
> > > successful. Especially contributors of code, bug reports, and test
> > reports,
> > > but also people who have spent hours on this list helping others and
> > being
> > > the support system that allows volunteer developers to focus on what
> they
> > > do best. Thanks to anyone who has ever sent a donation, as well as the
> > > commercial outfits who have contributed radios and other help. There
> are
> > > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a
> few
> > > that come to mind as having a substantial impact.
> > >
> > > At the end of this email is a very rough list of all the code
> > contributors
> > > to the project, extracted from the repository with minimal attempts to
> > > squash some duplicates. These are the rock stars that have gotten us to
> > > where we are today, so please join me in thanking them for spending
> their
> > > nights and weekends making this project the success that it is today!
> > >
> > > --Dan
> > >
> > >
> > > Commits Contributor
> > > -------|--------------------------------------------------
> > >    1865 Dan Smith
> > >     240 Jim Unroe
> > >     189 Tom Hayward
> > >     188 Marco Filippi
> > >     137 Zach Welch
> > >      59 Jens Jensen
> > >      58 Pavel Milanes (CO7WT)
> > >      26 K. Arvanitis
> > >      15 Tyler Tidman
> > >      12 Richard Cochran
> > >      10 Dan Drogichen
> > >       8 Sean Burford
> > >       8 Rick Farina
> > >       8 Michael Wagner
> > >       8 Eric Allen
> > >       8 Brian Dickman
> > >       7 SASANO Takayoshi
> > >       6 Vernon Mauery
> > >       6 Ron Wellsted
> > >       6 Rhett Robinson
> > >       6 Ray Cielencki
> > >       5 Rick DeWitt
> > >       5 Keith Williamson
> > >       4 Tim Smith
> > >       4 Nicolas Pike
> > >       4 Mathias Weyland
> > >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> > >       4 David Griffith
> > >       4 Chris Fosnight
> > >       4 Angus Ainslie
> > >       4 Alexey K
> > >       3 Rick Farina
> > >       3 Leo B?rring
> > >       3 Jon K Hellan
> > >       3 Christopher Hoover
> > >       3 Ben Smith
> > >       2 Richard Birch
> > >       2 Nathan Crapo
> > >       2 Michal Demin
> > >       2 Louie Ilievski
> > >       2 Johan Adler
> > >       2 Dean Gibson
> > >       2 Cody P Schafer
> > >       1 Windsor Schmidt
> > >       1 Wade Simmons
> > >       1 Stuart Tener
> > >       1 Steve Conklin
> > >       1 Ryan Tourge K2RRT x
> > >       1 Robert Terzi
> > >       1 Robert Morris
> > >       1 Patrik Nilsson
> > >       1 nytowl
> > >       1 Nolan Darilek
> > >       1 nicolas jon pike
> > >       1 Mike Pittaro
> > >       1 Michal D
> > >       1 Michael Lippold
> > >       1 Mark Adams
> > >       1 loudawgucr at gmail.com
> > >       1 Krystian SP6IT
> > >       1 kc1ckh at arrl.net
> > >       1 Jeremy McDermond
> > >       1 James Lee N1DDK
> > >       1 Imuli
> > >       1 Eric Dropps
> > >       1 Ed Santiago
> > >       1 Declan Rieb
> > >       1 David Fannin
> > >       1 Dave Allan
> > >       1 Dale Tyler
> > >       1 Charles Stewart
> > >       1 Brett Bump
> > >       1 Brad Ackerman
> > >       1 Attilio Pannella
> > >       1 Andrew
> > >       1 Adam Coddington
> > >       1 ac2lq
> > >       1 Aaron Pelly
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com
> To
> > > unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Dennis Wage at dwage at dwage.com
> > > To unsubscribe, send an email to chirp_users-unsubscribe@
> > > intrepid.danplanet.com
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/4c16af16/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 15
> > Date: Wed, 04 Jul 2018 10:48:54 -0300
> > From: survivor at cryptolab.net
> > Subject: [chirp_users] How to empty or null tone channel in Chirp?
> > To: chirp_users at intrepid.danplanet.com
> > Message-ID: <d8d337ecd37909ed5276af33628b3181 at cryptolab.net>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > When I use Chirp to set radio channels, there are many columns I cannot
> > let empty, unless I cannot save it or uploat to radio. Most repeaters
> > here have no subtone and I cannot let tone column empty, or null or
> > zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I
> > power on the transceiver in frequency mode and ajust to repeater
> > channel, I can hear people talking normally. When I power on in channel
> > mode and choose the respective channel with the same frequency, I cannot
> > hear people talking. Pearhaps, tone values are wrong and in most cases
> > they are unnecessary. How to I solve this?
> > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > Firmware
> > 3 KEY: N822413
> > 6 KEY: 140902N
> >
> > TKS
> >
> > PU4YOU
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/290ff6da/attachment-0001.html
> >
> > ------------------------------
> >
> > Message: 16
> > Date: Wed, 4 Jul 2018 09:06:29 -0500
> > From: Dennis Wage <dwage at dwage.com>
> > Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Message-ID:
> >         <CAE1d062sy4JN0ySc=
> > 5EH0yfu_w10HzbxEm52hqG7Ju+n4Ph-5A at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > You should be able to leave the "TONE" column empty, which means the
> values
> > in rToneFreq, cToneFreq will be ignored. And like you said those columns
> > cannot be empty. If you do leave them empty, Chirp by default will add
> 88.5
> > as extraneous data that will be ignored.
> >
> > Hope this helps.
> >
> > DW
> >
> >
> > Dennis M. Wage (W9BOQ)
> >
> > 245 Corum Hill Road
> > Castalian Springs, TN 37031
> > (615) 310-4242 Cell
> > (615) 562-5128 Home
> > http://hammondb3organ.net
> > http://overdubs.net
> >
> > On Wed, Jul 4, 2018 at 8:48 AM, <survivor at cryptolab.net> wrote:
> >
> > >
> > > When I use Chirp to set radio channels, there are many columns I cannot
> > > let empty, unless I cannot save it or uploat to radio. Most repeaters
> > here
> > > have no subtone and I cannot let tone column empty, or null or zero. In
> > > chirp, there is a preseted tone list from 67.0 to 254.1. When I power
> on
> > > the transceiver in frequency mode and ajust to repeater channel, I can
> > hear
> > > people talking normally. When I power on in channel mode and choose the
> > > respective channel with the same frequency, I cannot hear people
> talking.
> > > Pearhaps, tone values are wrong and in most cases they are unnecessary.
> > How
> > > to I solve this?
> > > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > > Firmwar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180705/9efac9e2/attachment-0002.html 


More information about the chirp_users mailing list