[chirp_users] chirp_users Digest, Vol 115, Issue 2

Dennis Wage dwage at dwage.com
Wed Jul 4 13:26:55 PDT 2018


https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios


Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net

On Wed, Jul 4, 2018 at 2:13 PM, Brian Burke <burke.n0imd at gmail.com> wrote:

> Any chance this software will work with a commercial Kenwood TK-805?
>
> On Wed, Jul 4, 2018, 15:05 <chirp_users-request at intrepid.danplanet.com>
> wrote:
>
>> Send chirp_users mailing list submissions to
>>         chirp_users at intrepid.danplanet.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> or, via email, send a message with subject or body 'help' to
>>         chirp_users-request at intrepid.danplanet.com
>>
>> You can reach the person managing the list at
>>         chirp_users-owner at intrepid.danplanet.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of chirp_users digest..."
>>
>>
>> Today's Topics:
>>
>>    1. Re: CSV Partial Load (Jean-Paul Louis)
>>    2. Re: CSV Partial Load (Aubrey Turner)
>>    3. Re: CSV Partial Load (Ken FitzGerald-Smith)
>>    4. Re: CSV Partial Load (Jim Unroe)
>>    5. Re: CSV Partial Load (Jim Unroe)
>>    6. Re: Chirp began ten years ago today... (W. T. Jones)
>>    7. Re: CSV Partial Load (Nigel A. Gunn  G8IFF/W8IFF)
>>    8. fail programming a Jetstream JT270M (Patricia Wilson)
>>    9. Re: fail programming a Jetstream JT270M (Jim Unroe)
>>   10. Re: fail programming a Jetstream JT270M (Patricia Wilson)
>>   11. Re: CSV Partial Load (Dennis Wage)
>>   12. Re: Chirp began ten years ago today... (Chuck Hast)
>>   13. Re: Chirp began ten years ago today... (mike-2007 at elp.rr.com)
>>   14. Re: Chirp began ten years ago today... (Dennis Wage)
>>   15. How to empty or null tone channel in Chirp?
>>       (survivor at cryptolab.net)
>>   16. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>>   17. Re: How to empty or null tone channel in Chirp? (neil b)
>>   18. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>>   19. Re: How to empty or null tone channel in Chirp? (Jim Unroe)
>>   20. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>>   21. IC-92AD funnies (Chuck Hast)
>>   22. Re: IC-92AD funnies (Chuck Hast)
>>   23. Re: Chirp began ten years ago today... (BobJ)
>>   24. Re: Chirp began ten years ago today... (Dennis Wage)
>>   25. Re: Chirp began ten years ago today... (Glenn Ervin)
>>   26. Re: Chirp began ten years ago today...
>>       (Nigel A. Gunn  G8IFF/W8IFF)
>>   27. Re: Chirp began ten years ago today... (Chuck Hast)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Tue, 3 Jul 2018 15:02:06 -0400
>> From: Jean-Paul Louis <louijp at yahoo.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <0BE7A004-925C-4FE2-9218-364F1C569DC5 at yahoo.com>
>> Content-Type: text/plain;       charset=utf-8
>>
>> I think that you have a problem with the NAMES of the channels. NAMES
>> should not have a space as this break the rules of CSV files.
>> Try replacing the spaces with ?_? and that might work a lot better.
>>
>> Just my $0.02,
>> Jean-Paul
>> N1JPL
>>
>>
>> > On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
>> >
>> > I just trimmed off all the punctuation spaces and made names 8
>> characters or less.  Same problem, it imports and shows channels 0-34 fine
>> but stops at 34 with errors:
>> >
>> > Line 35: [rtone] could not convert string to float:
>> >
>> > Line 36: [rtone] could not convert string to float:
>> >
>> > Line 37: [rtone] could not convert string to float:
>> >
>> > Line 38: [rtone] could not convert string to float:
>> > ...
>> >
>> > to the end of the list just after channel 70cm Cal:
>> >
>> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>> >
>> > Something is happening here between 33 and 34.
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Jean-Paul Louis at louijp at yahoo.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Tue, 3 Jul 2018 14:14:38 -0500
>> From: Aubrey Turner <aubrey.c.turner at gmail.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID: <d1ef62fc-1577-2d63-54aa-81ca27a15c02 at gmail.com>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>>
>> Actually, spaces are allowed in CSVs (in general just about everything
>> other than a COMMA is fine since it's the comma that separates the
>> fields).? And, we see that line 33 is loading (which also has a space).
>>
>> What I am seeing, however, is a lot more empty fields in line 34 than in
>> the previous lines.? In particular, the warning from Chirp is for the
>> 'rtone' column that it can't convert the string to a float.? In line 33
>> this appears to have a value of 88.5 while it's empty on line 34.? I
>> suggest looking at the values for the tone columns to see why these are
>> blank (and/or why Chirp is expecting a value there).
>>
>> I also see from the history of this email chain that? you're using Excel
>> to edit the CSV.? Excel is notorious for munging CSV files. You may want
>> to use a text editor of some kind instead of Excel to make sure that the
>> fields aren't getting messed up when the file is saved.
>>
>>
>> On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
>> > I think that you have a problem with the NAMES of the channels. NAMES
>> should not have a space as this break the rules of CSV files.
>> > Try replacing the spaces with ?_? and that might work a lot better.
>> >
>> > Just my $0.02,
>> > Jean-Paul
>> > N1JPL
>> >
>> >
>> >> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
>> >>
>> >> I just trimmed off all the punctuation spaces and made names 8
>> characters or less.  Same problem, it imports and shows channels 0-34 fine
>> but stops at 34 with errors:
>> >>
>> >> Line 35: [rtone] could not convert string to float:
>> >>
>> >> Line 36: [rtone] could not convert string to float:
>> >>
>> >> Line 37: [rtone] could not convert string to float:
>> >>
>> >> Line 38: [rtone] could not convert string to float:
>> >> ...
>> >>
>> >> to the end of the list just after channel 70cm Cal:
>> >>
>> >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>> >>
>> >> Something is happening here between 33 and 34.
>> >> _______________________________________________
>> >> chirp_users mailing list
>> >> chirp_users at intrepid.danplanet.com
>> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >> This message was sent to Jean-Paul Louis at louijp at yahoo.com
>> >> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Tue, 3 Jul 2018 20:45:05 +0100
>> From: Ken FitzGerald-Smith <ei7dkb at logicatrium.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <36A3E9FC-E5A6-4A73-A05B-D53EBA681348 at logicatrium.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> He needs values for all these fields in  your csv file: rToneFreq,
>> cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep
>>
>> rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do
>>
>> DtcsCode needs to be valid too. First valid code is 023
>>
>> DtcsPolarity needs to be one of  [?NN', 'NR', 'RN', 'RR']
>>
>> Mode needs to be AM or FM at least
>>
>> TStep (tuning step) needs to be numeric! Zero will do
>>
>> So this:
>>
>> 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,,
>>
>> Needs to become this at a minimum:
>>
>> 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,,
>>
>> There is no problem with the / in the name, but remember if you see a
>> conversion error like  ?String to Float? for any field, that indicates that
>> you must supply at least a numeric value, not an empty field.
>>
>> I hope this helps
>>
>> Ken
>>
>> > On 3 Jul 2018, at 20:14, Aubrey Turner <aubrey.c.turner at gmail.com>
>> wrote:
>> >
>> > Actually, spaces are allowed in CSVs (in general just about everything
>> > other than a COMMA is fine since it's the comma that separates the
>> > fields).  And, we see that line 33 is loading (which also has a space).
>> >
>> > What I am seeing, however, is a lot more empty fields in line 34 than
>> in
>> > the previous lines.  In particular, the warning from Chirp is for the
>> > 'rtone' column that it can't convert the string to a float.  In line 33
>> > this appears to have a value of 88.5 while it's empty on line 34.  I
>> > suggest looking at the values for the tone columns to see why these are
>> > blank (and/or why Chirp is expecting a value there).
>> >
>> > I also see from the history of this email chain that  you're using
>> Excel
>> > to edit the CSV.  Excel is notorious for munging CSV files. You may
>> want
>> > to use a text editor of some kind instead of Excel to make sure that
>> the
>> > fields aren't getting messed up when the file is saved.
>> >
>> >
>> > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
>> >> I think that you have a problem with the NAMES of the channels. NAMES
>> should not have a space as this break the rules of CSV files.
>> >> Try replacing the spaces with ?_? and that might work a lot better.
>> >>
>> >> Just my $0.02,
>> >> Jean-Paul
>> >> N1JPL
>> >>
>> >>
>> >>> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
>> >>>
>> >>> I just trimmed off all the punctuation spaces and made names 8
>> characters or less.  Same problem, it imports and shows channels 0-34 fine
>> but stops at 34 with errors:
>> >>>
>> >>> Line 35: [rtone] could not convert string to float:
>> >>>
>> >>> Line 36: [rtone] could not convert string to float:
>> >>>
>> >>> Line 37: [rtone] could not convert string to float:
>> >>>
>> >>> Line 38: [rtone] could not convert string to float:
>> >>> ...
>> >>>
>> >>> to the end of the list just after channel 70cm Cal:
>> >>>
>> >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>> >>>
>> >>> Something is happening here between 33 and 34.
>> >>> _______________________________________________
>> >>> chirp_users mailing list
>> >>> chirp_users at intrepid.danplanet.com
>> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >>> This message was sent to Jean-Paul Louis at louijp at yahoo.com
>> >>> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> >> _______________________________________________
>> >> chirp_users mailing list
>> >> chirp_users at intrepid.danplanet.com
>> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
>> <mailto:aubrey.c.turner at gmail.com>
>> >> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.
>> danplanet.com>
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.
>> danplanet.com>
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>> > This message was sent to Bitfarmer at ei7dkb at logicatrium.com <mailto:
>> ei7dkb at logicatrium.com>
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.
>> danplanet.com>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/0a00f7b4/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Tue, 3 Jul 2018 16:38:21 -0400
>> From: Jim Unroe <rock.unroe at gmail.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CADnO8U52HAgcL8EQacRgwrpf+1HtasvyyF=yW50_PnF6LodMyw@
>> mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> Well one thing is starting at 34 you removed the default values for
>> Tone, ToneSql, DTCS Code, DTCS Rx Code and DTCS Pol. They should be
>> there even if they are not used. The Tone Mode value determines if
>> they are used or not. And it looks like it is missing from all the
>> memory rows.
>>
>> Jim
>>
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Tue, 3 Jul 2018 16:43:25 -0400
>> From: Jim Unroe <rock.unroe at gmail.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CADnO8U6DjF8C_vMKArWksq0A2HW4mSDdYbs1VN3jr0B
>> aaUo-aA at mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>>
>> Program memory 31 using the CHIRP UI and then export it to a CSV file.
>> That is what the others need to look like.
>>
>> Jim
>>
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Tue, 3 Jul 2018 18:53:17 -0400
>> From: "W. T. Jones" <wn3lif at gmail.com>
>> Subject: Re: [chirp_users] Chirp began ten years ago today...
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CA+M-Wc_sa1=Rt880xOsggM3m-1PP2HRT4dcKxPy5GbZBELcxag@
>> mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Thanks to All that made Chirp possible! Never knew there were so many.
>>
>>
>>
>> Regards,
>>
>> WT
>> Real heroes do not wear capes. They wear dog tags, turnout gear, and
>> badges!
>>
>> On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
>>
>> >
>> >
>> > *Thank you* to Team CHIRP.
>> > An invaluable service to the Amateur Radio community.
>> >
>> > John  ?Miklor?   K3NXU
>> >
>> > http://www.miklor.com
>> >
>> > http://www.miklor.com/DMR/
>> >
>> >
>> >
>> >
>> >
>> > *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
>> > chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
>> > *Sent:* Tuesday, July 3, 2018 2:32 PM
>> >
>> > *To:* Discussion of CHIRP
>> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
>> >
>> >
>> >
>> > *yes this program has saved a lot of hours*
>> >
>> > *thanks for it*
>> >
>> >
>> >
>> > *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,
>> SKYWARN
>> > 128A*
>> >
>> >
>> >
>> >
>> > ------------------------------
>> >
>> > *From:* chirp_users-bounces at intrepid.danplanet.com <
>> > chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman Sebern
>> <
>> > nsebern14 at gmail.com>
>> > *Sent:* Tuesday, July 3, 2018 10:38 AM
>> > *To:* Discussion of CHIRP
>> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
>> >
>> >
>> >
>> > Thank YOU.
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
>> >
>> > Congratulations on reaching your 10 year milestone with such a great
>> piece
>> > of software!
>> > As a fairly new Ham, it's made my life a lot easier.
>> > Thank you!
>> >
>> > 73s
>> > Frank
>> > K1HLZ
>> >
>> > On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com> wrote:
>> >
>> > Hi all,
>> >
>> > I just wanted to share a milestone in the CHIRP project with the
>> community. Ten years ago today, on July 3rd 2008, I made the first commit
>> to the repository which started the chirp project:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/31cfb1a376fb
>> >
>> > It was just a rough bit of code that could talk to an Icom IC-92AD and
>> I was apparently thinking of calling it "repidr". I do not recall what that
>> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/646c121a847b
>> >
>> > By July 19th, I was ready to make something available, which was just
>> able to read and write CSV files, and talk to Icom IC-9x radios and the
>> ID-800H. This was the first version 0.1.1:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/1428729c41b7
>> >
>> > I still remember the large stack of paper on the corner of my desk
>> where I had written out tons of hex, all in pencil, erased and re-written
>> many times, trying to decode the first few radio memories and looking for
>> patterns to make it easier.
>> >
>> > The project has come a long way since then, largely due to the help and
>> involvement of other volunteers and users. While the first release
>> supported two radio models, the latest one supports 228 distinct models,
>> with more if you count the many clones that exist. The users mailing list
>> has a fairly amazing 2892 people subscribed, from all over the world,
>> representing a tiny fraction of the total user base.
>> >
>> > So, I just want to thank all the people who have made CHIRP possible
>> and successful. Especially contributors of code, bug reports, and test
>> reports, but also people who have spent hours on this list helping others
>> and being the support system that allows volunteer developers to focus on
>> what they do best. Thanks to anyone who has ever sent a donation, as well
>> as the commercial outfits who have contributed radios and other help. There
>> are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a
>> few that come to mind as having a substantial impact.
>> >
>> > At the end of this email is a very rough list of all the code
>> contributors to the project, extracted from the repository with minimal
>> attempts to squash some duplicates. These are the rock stars that have
>> gotten us to where we are today, so please join me in thanking them for
>> spending their nights and weekends making this project the success that it
>> is today!
>> >
>> > --Dan
>> >
>> >
>> > Commits Contributor
>> > -------|
>> >
>> > ------------------------------
>> >
>> >
>> >    1865 Dan Smith
>> >     240 Jim Unroe
>> >     189 Tom Hayward
>> >     188 Marco Filippi
>> >     137 Zach Welch
>> >      59 Jens Jensen
>> >      58 Pavel Milanes (CO7WT)
>> >      26 K. Arvanitis
>> >      15 Tyler Tidman
>> >      12 Richard Cochran
>> >      10 Dan Drogichen
>> >       8 Sean Burford
>> >       8 Rick Farina
>> >       8 Michael Wagner
>> >       8 Eric Allen
>> >       8 Brian Dickman
>> >       7 SASANO Takayoshi
>> >       6 Vernon Mauery
>> >       6 Ron Wellsted
>> >       6 Rhett Robinson
>> >       6 Ray Cielencki
>> >       5 Rick DeWitt
>> >       5 Keith Williamson
>> >       4 Tim Smith
>> >       4 Nicolas Pike
>> >       4 Mathias Weyland
>> >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
>> >       4 David Griffith
>> >       4 Chris Fosnight
>> >       4 Angus Ainslie
>> >       4 Alexey K
>> >       3 Rick Farina
>> >       3 Leo B?rring
>> >       3 Jon K Hellan
>> >       3 Christopher Hoover
>> >       3 Ben Smith
>> >       2 Richard Birch
>> >       2 Nathan Crapo
>> >       2 Michal Demin
>> >       2 Louie Ilievski
>> >       2 Johan Adler
>> >       2 Dean Gibson
>> >       2 Cody P Schafer
>> >       1 Windsor Schmidt
>> >       1 Wade Simmons
>> >       1 Stuart Tener
>> >       1 Steve Conklin
>> >       1 Ryan Tourge K2RRT x
>> >       1 Robert Terzi
>> >       1 Robert Morris
>> >       1 Patrik Nilsson
>> >       1 nytowl
>> >       1 Nolan Darilek
>> >       1 nicolas jon pike
>> >       1 Mike Pittaro
>> >       1 Michal D
>> >       1 Michael Lippold
>> >       1 Mark Adams
>> >       1 loudawgucr at gmail.com
>> >       1 Krystian SP6IT
>> >       1 kc1ckh at arrl.net
>> >       1 Jeremy McDermond
>> >       1 James Lee N1DDK
>> >       1 Imuli
>> >       1 Eric Dropps
>> >       1 Ed Santiago
>> >       1 Declan Rieb
>> >       1 David Fannin
>> >       1 Dave Allan
>> >       1 Dale Tyler
>> >       1 Charles Stewart
>> >       1 Brett Bump
>> >       1 Brad Ackerman
>> >       1 Attilio Pannella
>> >       1 Andrew
>> >       1 Adam Coddington
>> >       1 ac2lq
>> >       1 Aaron Pelly
>> >
>> > ------------------------------
>> >
>> >
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to FRANK G at k1hlz at pcicon.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> >
>> >
>> > --
>> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Norman Sebern at nsebern14 at gmail.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to WT at wn3lif at gmail.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/ea5689fe/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Tue, 3 Jul 2018 19:08:19 -0400 (EDT)
>> From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel at ngunn.net>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,
>>         imatglamis <imatglamis at gmail.com>
>> Message-ID: <677469876.85416.1530659299549 at email.1and1.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Your frequency doesn't conform to an acceptable frequency step?
>>
>>
>> > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
>> >
>> >     I just trimmed off all the punctuation spaces and made names 8
>> characters or less.  Same problem, it imports and shows channels 0-34 fine
>> but stops at 34 with errors:
>> >
>> >     Line 35: [rtone] could not convert string to float:
>> >
>> >     Line 36: [rtone] could not convert string to float:
>> >
>> >     Line 37: [rtone] could not convert string to float:
>> >
>> >     Line 38: [rtone] could not convert string to float:
>> >     ...
>> >
>> >     to the end of the list just after channel 70cm Cal:
>> >
>> >     31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >     32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >     33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> >     34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> >     35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> >     36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>> >
>> >     Something is happening here between 33 and 34.
>> >     _______________________________________________
>> >     chirp_users mailing list
>> >     chirp_users at intrepid.danplanet.com
>> >     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>> >     To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> >
>>
>>
>> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
>> 937 825 5032
>> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
>> International #385,
>> Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/28a00e15/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 8
>> Date: Tue, 3 Jul 2018 16:30:34 -0700
>> From: Patricia Wilson <wilson.pr.gm at gmail.com>
>> Subject: [chirp_users] fail programming a Jetstream JT270M
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID:
>>         <CAAwRy+ROdfSYwuKNceArVo3WsCOi+zCQTnr8bn9zrdrb=nZNVA at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I am attempting to program a Jetstream JT270M using a Prolific cable.
>>
>> The CHIRP Error message pop-up says
>>
>> An error has occurred
>> could not open com4 (Error 2) The system can not find the file specified.
>>
>> In the WIN10 Device manager listing for COM4 it says
>> Driver provide is prolific
>> Date is 10-17-2017
>> Version is 3.8.18.0
>>
>> Device status is
>> This device cannot start. (Code 10)
>> A device which does not exist was specified.
>>
>> Can anyone help me out with this?
>>
>>
>>
>>
>> --
>>
>> Patricia Wilson
>> Apache Junction, AZ
>> Member NRA, ARRL
>> WB8DXX (Extra)
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/b3a2feed/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 9
>> Date: Tue, 3 Jul 2018 19:39:39 -0400
>> From: Jim Unroe <rock.unroe at gmail.com>
>> Subject: Re: [chirp_users] fail programming a Jetstream JT270M
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CADnO8U5mLqAqAvcaHt8ZAJ_24ZWCzQqxK4GZ0cKruK39jvMaEg@
>> mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> > The CHIRP Error message pop-up says
>> >
>> > An error has occurred
>> > could not open com4 (Error 2) The system can not find the file
>> specified.
>> >
>> > In the WIN10 Device manager listing for COM4 it says
>> > Driver provide is prolific
>> > Date is 10-17-2017
>> > Version is 3.8.18.0
>> >
>> > Device status is
>> > This device cannot start. (Code 10)
>> > A device which does not exist was specified.
>> >
>> > Can anyone help me out with this?
>>
>> This is a common problem, You must download, install and select an
>> older Prolific device driver (V3.2.0.0 ). This page has a link to the
>> device driver and instructions for installing it.
>>
>> http://www.miklor.com/COM/UV_Drivers.php
>>
>> Jim KC9HI
>>
>>
>> ------------------------------
>>
>> Message: 10
>> Date: Tue, 3 Jul 2018 17:27:20 -0700
>> From: Patricia Wilson <wilson.pr.gm at gmail.com>
>> Subject: Re: [chirp_users] fail programming a Jetstream JT270M
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID:
>>         <CAAwRy+Tp69WhocVuPLVtTjRHA+sD1Dxb3WcG=y-mEbN7nnV0uw at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I had tried that and somehow screwed up. This time around SUCCESS!!! Thank
>> you ever so much and
>>
>> CONGRATS to Dan on the 10th anniversary.
>>
>> On Tue, Jul 3, 2018 at 4:40 PM Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> > > The CHIRP Error message pop-up says
>> > >
>> > > An error has occurred
>> > > could not open com4 (Error 2) The system can not find the file
>> specified.
>> > >
>> > > In the WIN10 Device manager listing for COM4 it says
>> > > Driver provide is prolific
>> > > Date is 10-17-2017
>> > > Version is 3.8.18.0
>> > >
>> > > Device status is
>> > > This device cannot start. (Code 10)
>> > > A device which does not exist was specified.
>> > >
>> > > Can anyone help me out with this?
>> >
>> > This is a common problem, You must download, install and select an
>> > older Prolific device driver (V3.2.0.0 ). This page has a link to the
>> > device driver and instructions for installing it.
>> >
>> > http://www.miklor.com/COM/UV_Drivers.php
>> >
>> > Jim KC9HI
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Patricia Wilson at wilson.pr.gm at gmail.com
>> > To unsubscribe, send an email to
>> > chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>>
>>
>> --
>>
>> Patricia Wilson
>> Apache Junction, AZ
>> Member NRA, ARRL
>> WB8DXX (Extra)
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/93a7464e/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 11
>> Date: Tue, 3 Jul 2018 22:12:41 -0500
>> From: Dennis Wage <dwage at dwage.com>
>> Subject: Re: [chirp_users] CSV Partial Load
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CAE1d062WotJGkESaQTQ0RqwQxy_hCh8L-xU52YWUAXVg667XzQ at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> ??
>> Columns G, H, I, J, and L require data be in the CSV file. Of these
>> columns
>> some will produce a Chirp error but if you continue Chirp will kindly fill
>> in dummy data. And some of the columns require data, that if not there
>> will
>> stop the import.
>> I just don't have time to research and tell you which. But simply put, put
>> data in all fields.
>>
>> This will work:
>> 88.5 88.5 23 NN FM 5 and so will this:
>> 67 67 23 NN FM 5
>> Your rTone on channel 57, line 58 is wrong too.
>>
>> Dennis M. Wage (W9BOQ)
>>
>> 245 Corum Hill Road
>> Castalian Springs, TN 37031
>> (615) 310-4242 Cell
>> (615) 562-5128 Home
>> http://hammondb3organ.net
>> http://overdubs.net
>>
>> On Tue, Jul 3, 2018 at 6:08 PM, Nigel A. Gunn G8IFF/W8IFF <
>> nigel at ngunn.net>
>> wrote:
>>
>> > Your frequency doesn't conform to an acceptable frequency step?
>> >
>> >
>> > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
>> >
>> > I just trimmed off all the punctuation spaces and made names 8
>> characters
>> > or less.  Same problem, it imports and shows channels 0-34 fine but
>> stops
>> > at 34 with errors:
>> >
>> > Line 35: [rtone] could not convert string to float:
>> >
>> > Line 36: [rtone] could not convert string to float:
>> >
>> > Line 37: [rtone] could not convert string to float:
>> >
>> > Line 38: [rtone] could not convert string to float:
>> > ...
>> >
>> > to the end of the list just after channel 70cm Cal:
>> >
>> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
>> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
>> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
>> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>> >
>> > Something is happening here between 33 and 34.
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> >
>> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
>> 937
>> > 825 5032
>> > Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net
>> www
>> > http://www.ngunn.net
>> > Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
>> > International #385,
>> > Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Dennis Wage at dwage at dwage.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/c4cdd456/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 12
>> Date: Tue, 3 Jul 2018 23:51:12 -0500
>> From: Chuck Hast <kp4djt at gmail.com>
>> Subject: Re: [chirp_users] Chirp began ten years ago today...
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CAN9xdP80-orjA2bSoXvSeMaGkD_SwiDLzEbUwc8bb40FNEDQtg at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Dan,
>> First a big hat off to you and all on that list for the great work and
>> piece of art.
>> It is funny, I was working in Kalama WA in a newly opened glass plant, the
>> company that
>> I worked for had sold them the fore hearths and glass container inspection
>> machines. My
>> job was to bring those machines on line and then train and shepherd those
>> folks in the
>> inspections of the bottles. I had tons of overtime so I toddled down to
>> HRO
>> in PDX and
>> got me a 92AT. That was I think in late Aug 2008 or Sept. I know it had
>> not
>> started raining
>> yet and the weather was still good. It was one of the folks at HRO that
>> aimed me your
>> direction I believe it was. I did not know that the project was that new.
>> I
>> do not remember
>> when I downloaded the first code, but it worked on that 92AT (I still have
>> it).
>>
>> By way I now live in Oklahoma, but I sure miss the NW...
>>
>> Looks like I joined the list on 20 Jun 2009.
>>
>> On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <wn3lif at gmail.com> wrote:
>>
>> > Thanks to All that made Chirp possible! Never knew there were so many.
>> >
>> >
>> >
>> > Regards,
>> >
>> > WT
>> > Real heroes do not wear capes. They wear dog tags, turnout gear, and
>> > badges!
>> >
>> > On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
>> >
>> >>
>> >>
>> >> *Thank you* to Team CHIRP.
>> >> An invaluable service to the Amateur Radio community.
>> >>
>> >> John  ?Miklor?   K3NXU
>> >>
>> >> http://www.miklor.com
>> >>
>> >> http://www.miklor.com/DMR/
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
>> >> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
>> >> *Sent:* Tuesday, July 3, 2018 2:32 PM
>> >>
>> >> *To:* Discussion of CHIRP
>> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
>> >>
>> >>
>> >>
>> >> *yes this program has saved a lot of hours*
>> >>
>> >> *thanks for it*
>> >>
>> >>
>> >>
>> >> *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,
>> >> SKYWARN 128A*
>> >>
>> >>
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> *From:* chirp_users-bounces at intrepid.danplanet.com <
>> >> chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman
>> Sebern <
>> >> nsebern14 at gmail.com>
>> >> *Sent:* Tuesday, July 3, 2018 10:38 AM
>> >> *To:* Discussion of CHIRP
>> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
>> >>
>> >>
>> >>
>> >> Thank YOU.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
>> >>
>> >> Congratulations on reaching your 10 year milestone with such a great
>> >> piece of software!
>> >> As a fairly new Ham, it's made my life a lot easier.
>> >> Thank you!
>> >>
>> >> 73s
>> >> Frank
>> >> K1HLZ
>> >>
>> >> On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com>
>> wrote:
>> >>
>> >> Hi all,
>> >>
>> >> I just wanted to share a milestone in the CHIRP project with the
>> community. Ten years ago today, on July 3rd 2008, I made the first commit
>> to the repository which started the chirp project:
>> >>
>> >> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/31cfb1a376fb
>> >>
>> >> It was just a rough bit of code that could talk to an Icom IC-92AD and
>> I was apparently thinking of calling it "repidr". I do not recall what that
>> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
>> >>
>> >> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/646c121a847b
>> >>
>> >> By July 19th, I was ready to make something available, which was just
>> able to read and write CSV files, and talk to Icom IC-9x radios and the
>> ID-800H. This was the first version 0.1.1:
>> >>
>> >> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/1428729c41b7
>> >>
>> >> I still remember the large stack of paper on the corner of my desk
>> where I had written out tons of hex, all in pencil, erased and re-written
>> many times, trying to decode the first few radio memories and looking for
>> patterns to make it easier.
>> >>
>> >> The project has come a long way since then, largely due to the help
>> and involvement of other volunteers and users. While the first release
>> supported two radio models, the latest one supports 228 distinct models,
>> with more if you count the many clones that exist. The users mailing list
>> has a fairly amazing 2892 people subscribed, from all over the world,
>> representing a tiny fraction of the total user base.
>> >>
>> >> So, I just want to thank all the people who have made CHIRP possible
>> and successful. Especially contributors of code, bug reports, and test
>> reports, but also people who have spent hours on this list helping others
>> and being the support system that allows volunteer developers to focus on
>> what they do best. Thanks to anyone who has ever sent a donation, as well
>> as the commercial outfits who have contributed radios and other help. There
>> are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a
>> few that come to mind as having a substantial impact.
>> >>
>> >> At the end of this email is a very rough list of all the code
>> contributors to the project, extracted from the repository with minimal
>> attempts to squash some duplicates. These are the rock stars that have
>> gotten us to where we are today, so please join me in thanking them for
>> spending their nights and weekends making this project the success that it
>> is today!
>> >>
>> >> --Dan
>> >>
>> >>
>> >> Commits Contributor
>> >> -------|
>> >>
>> >> ------------------------------
>> >>
>> >>
>> >>    1865 Dan Smith
>> >>     240 Jim Unroe
>> >>     189 Tom Hayward
>> >>     188 Marco Filippi
>> >>     137 Zach Welch
>> >>      59 Jens Jensen
>> >>      58 Pavel Milanes (CO7WT)
>> >>      26 K. Arvanitis
>> >>      15 Tyler Tidman
>> >>      12 Richard Cochran
>> >>      10 Dan Drogichen
>> >>       8 Sean Burford
>> >>       8 Rick Farina
>> >>       8 Michael Wagner
>> >>       8 Eric Allen
>> >>       8 Brian Dickman
>> >>       7 SASANO Takayoshi
>> >>       6 Vernon Mauery
>> >>       6 Ron Wellsted
>> >>       6 Rhett Robinson
>> >>       6 Ray Cielencki
>> >>       5 Rick DeWitt
>> >>       5 Keith Williamson
>> >>       4 Tim Smith
>> >>       4 Nicolas Pike
>> >>       4 Mathias Weyland
>> >>       4 IT2 Stuart Blake Tener, USNR (N3GWG)
>> >>       4 David Griffith
>> >>       4 Chris Fosnight
>> >>       4 Angus Ainslie
>> >>       4 Alexey K
>> >>       3 Rick Farina
>> >>       3 Leo B?rring
>> >>       3 Jon K Hellan
>> >>       3 Christopher Hoover
>> >>       3 Ben Smith
>> >>       2 Richard Birch
>> >>       2 Nathan Crapo
>> >>       2 Michal Demin
>> >>       2 Louie Ilievski
>> >>       2 Johan Adler
>> >>       2 Dean Gibson
>> >>       2 Cody P Schafer
>> >>       1 Windsor Schmidt
>> >>       1 Wade Simmons
>> >>       1 Stuart Tener
>> >>       1 Steve Conklin
>> >>       1 Ryan Tourge K2RRT x
>> >>       1 Robert Terzi
>> >>       1 Robert Morris
>> >>       1 Patrik Nilsson
>> >>       1 nytowl
>> >>       1 Nolan Darilek
>> >>       1 nicolas jon pike
>> >>       1 Mike Pittaro
>> >>       1 Michal D
>> >>       1 Michael Lippold
>> >>       1 Mark Adams
>> >>       1 loudawgucr at gmail.com
>> >>       1 Krystian SP6IT
>> >>       1 kc1ckh at arrl.net
>> >>       1 Jeremy McDermond
>> >>       1 James Lee N1DDK
>> >>       1 Imuli
>> >>       1 Eric Dropps
>> >>       1 Ed Santiago
>> >>       1 Declan Rieb
>> >>       1 David Fannin
>> >>       1 Dave Allan
>> >>       1 Dale Tyler
>> >>       1 Charles Stewart
>> >>       1 Brett Bump
>> >>       1 Brad Ackerman
>> >>       1 Attilio Pannella
>> >>       1 Andrew
>> >>       1 Adam Coddington
>> >>       1 ac2lq
>> >>       1 Aaron Pelly
>> >>
>> >> ------------------------------
>> >>
>> >>
>> >> chirp_users mailing list
>> >> chirp_users at intrepid.danplanet.com
>> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >> This message was sent to FRANK G at k1hlz at pcicon.net
>> >> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> >>
>> >>
>> >> --
>> >> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>> >>
>> >> _______________________________________________
>> >> chirp_users mailing list
>> >> chirp_users at intrepid.danplanet.com
>> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >> This message was sent to Norman Sebern at nsebern14 at gmail.com
>> >> To unsubscribe, send an email to
>> >> chirp_users-unsubscribe at intrepid.danplanet.com
>> >>
>> >>
>> >> _______________________________________________
>> >> chirp_users mailing list
>> >> chirp_users at intrepid.danplanet.com
>> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >> This message was sent to WT at wn3lif at gmail.com
>> >> To unsubscribe, send an email to
>> >> chirp_users-unsubscribe at intrepid.danplanet.com
>> >>
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck Hast at kp4djt at gmail.com
>> > To unsubscribe, send an email to
>> > chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>> --
>> Chirp + Editcp + MD380Tools on Linux
>> Celestial!!!
>> Chuck -- KP4DJT
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180703/4a16ee0c/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 13
>> Date: Wed, 4 Jul 2018 06:24:13 -0600
>> From: <mike-2007 at elp.rr.com>
>> Subject: Re: [chirp_users] Chirp began ten years ago today...
>> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
>> Message-ID: <009e01d41391$ed23a970$c76afc50$@elp.rr.com>
>> Content-Type: text/plain;       charset="utf-8"
>>
>> Congratulations, and thanks for all the hard work.  Few will actually
>> realize the dedication it takes to do this for 10 years, and without profit.
>>
>> Vy73 ? Mike ? KD5KC
>> El Paso, Texas ? DM61rt
>>
>>
>>
>> -----Original Message-----
>> From: chirp_users-bounces at intrepid.danplanet.com <
>> chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
>> Sent: Tuesday, July 3, 2018 7:25 AM
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Subject: [chirp_users] Chirp began ten years ago today...
>>
>> Hi all,
>>
>> I just wanted to share a milestone in the CHIRP project with the
>> community. Ten years ago today, on July 3rd 2008, I made the first commit
>> to the repository which started the chirp project:
>>
>> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/31cfb1a376fb
>>
>> It was just a rough bit of code that could talk to an Icom IC-92AD and I
>> was apparently thinking of calling it "repidr". I do not recall what that
>> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
>>
>> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/646c121a847b
>>
>> By July 19th, I was ready to make something available, which was just
>> able to read and write CSV files, and talk to Icom IC-9x radios and the
>> ID-800H. This was the first version 0.1.1:
>>
>> https://chirp.danplanet.com/projects/chirp/repository/
>> revisions/1428729c41b7
>>
>> I still remember the large stack of paper on the corner of my desk where
>> I had written out tons of hex, all in pencil, erased and re-written many
>> times, trying to decode the first few radio memories and looking for
>> patterns to make it easier.
>>
>> The project has come a long way since then, largely due to the help and
>> involvement of other volunteers and users. While the first release
>> supported two radio models, the latest one supports 228 distinct models,
>> with more if you count the many clones that exist. The users mailing list
>> has a fairly amazing 2892 people subscribed, from all over the world,
>> representing a tiny fraction of the total user base.
>>
>> So, I just want to thank all the people who have made CHIRP possible and
>> successful. Especially contributors of code, bug reports, and test reports,
>> but also people who have spent hours on this list helping others and being
>> the support system that allows volunteer developers to focus on what they
>> do best. Thanks to anyone who has ever sent a donation, as well as the
>> commercial outfits who have contributed radios and other help. There are
>> too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
>> that come to mind as having a substantial impact.
>>
>> At the end of this email is a very rough list of all the code
>> contributors to the project, extracted from the repository with minimal
>> attempts to squash some duplicates. These are the rock stars that have
>> gotten us to where we are today, so please join me in thanking them for
>> spending their nights and weekends making this project the success that it
>> is today!
>>
>> --Dan
>>
>>
>> Commits Contributor
>> -------|--------------------------------------------------
>>    1865 Dan Smith
>>     240 Jim Unroe
>>     189 Tom Hayward
>>     188 Marco Filippi
>>     137 Zach Welch
>>      59 Jens Jensen
>>      58 Pavel Milanes (CO7WT)
>>      26 K. Arvanitis
>>      15 Tyler Tidman
>>      12 Richard Cochran
>>      10 Dan Drogichen
>>       8 Sean Burford
>>       8 Rick Farina
>>       8 Michael Wagner
>>       8 Eric Allen
>>       8 Brian Dickman
>>       7 SASANO Takayoshi
>>       6 Vernon Mauery
>>       6 Ron Wellsted
>>       6 Rhett Robinson
>>       6 Ray Cielencki
>>       5 Rick DeWitt
>>       5 Keith Williamson
>>       4 Tim Smith
>>       4 Nicolas Pike
>>       4 Mathias Weyland
>>       4 IT2 Stuart Blake Tener, USNR (N3GWG)
>>       4 David Griffith
>>       4 Chris Fosnight
>>       4 Angus Ainslie
>>       4 Alexey K
>>       3 Rick Farina
>>       3 Leo B?rring
>>       3 Jon K Hellan
>>       3 Christopher Hoover
>>       3 Ben Smith
>>       2 Richard Birch
>>       2 Nathan Crapo
>>       2 Michal Demin
>>       2 Louie Ilievski
>>       2 Johan Adler
>>       2 Dean Gibson
>>       2 Cody P Schafer
>>       1 Windsor Schmidt
>>       1 Wade Simmons
>>       1 Stuart Tener
>>       1 Steve Conklin
>>       1 Ryan Tourge K2RRT x
>>       1 Robert Terzi
>>       1 Robert Morris
>>       1 Patrik Nilsson
>>       1 nytowl
>>       1 Nolan Darilek
>>       1 nicolas jon pike
>>       1 Mike Pittaro
>>       1 Michal D
>>       1 Michael Lippold
>>       1 Mark Adams
>>       1 loudawgucr at gmail.com
>>       1 Krystian SP6IT
>>       1 kc1ckh at arrl.net
>>       1 Jeremy McDermond
>>       1 James Lee N1DDK
>>       1 Imuli
>>       1 Eric Dropps
>>       1 Ed Santiago
>>       1 Declan Rieb
>>       1 David Fannin
>>       1 Dave Allan
>>       1 Dale Tyler
>>       1 Charles Stewart
>>       1 Brett Bump
>>       1 Brad Ackerman
>>       1 Attilio Pannella
>>       1 Andrew
>>       1 Adam Coddington
>>       1 ac2lq
>>       1 Aaron Pelly
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com To
>> unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 14
>> Date: Wed, 4 Jul 2018 07:48:57 -0500
>> From: Dennis Wage <dwage at dwage.com>
>> Subject: Re: [chirp_users] Chirp began ten years ago today...
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CAE1d061W+AKz-b5bv+5yKMzAAEH-5Fo_400e69OH4YjPBhAndA at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Don't be that guy. Donate now here:
>> https://chirp.danplanet.com/projects/chirp/wiki/Download
>>
>> Dennis M. Wage (W9BOQ)
>>
>> 245 Corum Hill Road
>> Castalian Springs, TN 37031
>> (615) 310-4242 Cell
>> (615) 562-5128 Home
>> http://hammondb3organ.net
>> http://overdubs.net
>>
>> On Wed, Jul 4, 2018 at 7:24 AM, <mike-2007 at elp.rr.com> wrote:
>>
>> > Congratulations, and thanks for all the hard work.  Few will actually
>> > realize the dedication it takes to do this for 10 years, and without
>> profit.
>> >
>> > Vy73 ? Mike ? KD5KC
>> > El Paso, Texas ? DM61rt
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: chirp_users-bounces at intrepid.danplanet.com <
>> > chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
>> > Sent: Tuesday, July 3, 2018 7:25 AM
>> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> > Subject: [chirp_users] Chirp began ten years ago today...
>> >
>> > Hi all,
>> >
>> > I just wanted to share a milestone in the CHIRP project with the
>> > community. Ten years ago today, on July 3rd 2008, I made the first
>> commit
>> > to the repository which started the chirp project:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> > revisions/31cfb1a376fb
>> >
>> > It was just a rough bit of code that could talk to an Icom IC-92AD and I
>> > was apparently thinking of calling it "repidr". I do not recall what
>> that
>> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> > revisions/646c121a847b
>> >
>> > By July 19th, I was ready to make something available, which was just
>> able
>> > to read and write CSV files, and talk to Icom IC-9x radios and the
>> ID-800H.
>> > This was the first version 0.1.1:
>> >
>> > https://chirp.danplanet.com/projects/chirp/repository/
>> > revisions/1428729c41b7
>> >
>> > I still remember the large stack of paper on the corner of my desk
>> where I
>> > had written out tons of hex, all in pencil, erased and re-written many
>> > times, trying to decode the first few radio memories and looking for
>> > patterns to make it easier.
>> >
>> > The project has come a long way since then, largely due to the help and
>> > involvement of other volunteers and users. While the first release
>> > supported two radio models, the latest one supports 228 distinct models,
>> > with more if you count the many clones that exist. The users mailing
>> list
>> > has a fairly amazing 2892 people subscribed, from all over the world,
>> > representing a tiny fraction of the total user base.
>> >
>> > So, I just want to thank all the people who have made CHIRP possible and
>> > successful. Especially contributors of code, bug reports, and test
>> reports,
>> > but also people who have spent hours on this list helping others and
>> being
>> > the support system that allows volunteer developers to focus on what
>> they
>> > do best. Thanks to anyone who has ever sent a donation, as well as the
>> > commercial outfits who have contributed radios and other help. There are
>> > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
>> > that come to mind as having a substantial impact.
>> >
>> > At the end of this email is a very rough list of all the code
>> contributors
>> > to the project, extracted from the repository with minimal attempts to
>> > squash some duplicates. These are the rock stars that have gotten us to
>> > where we are today, so please join me in thanking them for spending
>> their
>> > nights and weekends making this project the success that it is today!
>> >
>> > --Dan
>> >
>> >
>> > Commits Contributor
>> > -------|--------------------------------------------------
>> >    1865 Dan Smith
>> >     240 Jim Unroe
>> >     189 Tom Hayward
>> >     188 Marco Filippi
>> >     137 Zach Welch
>> >      59 Jens Jensen
>> >      58 Pavel Milanes (CO7WT)
>> >      26 K. Arvanitis
>> >      15 Tyler Tidman
>> >      12 Richard Cochran
>> >      10 Dan Drogichen
>> >       8 Sean Burford
>> >       8 Rick Farina
>> >       8 Michael Wagner
>> >       8 Eric Allen
>> >       8 Brian Dickman
>> >       7 SASANO Takayoshi
>> >       6 Vernon Mauery
>> >       6 Ron Wellsted
>> >       6 Rhett Robinson
>> >       6 Ray Cielencki
>> >       5 Rick DeWitt
>> >       5 Keith Williamson
>> >       4 Tim Smith
>> >       4 Nicolas Pike
>> >       4 Mathias Weyland
>> >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
>> >       4 David Griffith
>> >       4 Chris Fosnight
>> >       4 Angus Ainslie
>> >       4 Alexey K
>> >       3 Rick Farina
>> >       3 Leo B?rring
>> >       3 Jon K Hellan
>> >       3 Christopher Hoover
>> >       3 Ben Smith
>> >       2 Richard Birch
>> >       2 Nathan Crapo
>> >       2 Michal Demin
>> >       2 Louie Ilievski
>> >       2 Johan Adler
>> >       2 Dean Gibson
>> >       2 Cody P Schafer
>> >       1 Windsor Schmidt
>> >       1 Wade Simmons
>> >       1 Stuart Tener
>> >       1 Steve Conklin
>> >       1 Ryan Tourge K2RRT x
>> >       1 Robert Terzi
>> >       1 Robert Morris
>> >       1 Patrik Nilsson
>> >       1 nytowl
>> >       1 Nolan Darilek
>> >       1 nicolas jon pike
>> >       1 Mike Pittaro
>> >       1 Michal D
>> >       1 Michael Lippold
>> >       1 Mark Adams
>> >       1 loudawgucr at gmail.com
>> >       1 Krystian SP6IT
>> >       1 kc1ckh at arrl.net
>> >       1 Jeremy McDermond
>> >       1 James Lee N1DDK
>> >       1 Imuli
>> >       1 Eric Dropps
>> >       1 Ed Santiago
>> >       1 Declan Rieb
>> >       1 David Fannin
>> >       1 Dave Allan
>> >       1 Dale Tyler
>> >       1 Charles Stewart
>> >       1 Brett Bump
>> >       1 Brad Ackerman
>> >       1 Attilio Pannella
>> >       1 Andrew
>> >       1 Adam Coddington
>> >       1 ac2lq
>> >       1 Aaron Pelly
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com
>> To
>> > unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Dennis Wage at dwage at dwage.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/4c16af16/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 15
>> Date: Wed, 04 Jul 2018 10:48:54 -0300
>> From: survivor at cryptolab.net
>> Subject: [chirp_users] How to empty or null tone channel in Chirp?
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID: <d8d337ecd37909ed5276af33628b3181 at cryptolab.net>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> When I use Chirp to set radio channels, there are many columns I cannot
>> let empty, unless I cannot save it or uploat to radio. Most repeaters
>> here have no subtone and I cannot let tone column empty, or null or
>> zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I
>> power on the transceiver in frequency mode and ajust to repeater
>> channel, I can hear people talking normally. When I power on in channel
>> mode and choose the respective channel with the same frequency, I cannot
>> hear people talking. Pearhaps, tone values are wrong and in most cases
>> they are unnecessary. How to I solve this?
>> I have a Baofeng UV-82 WITH 8 Watts (HP).
>> Firmware
>> 3 KEY: N822413
>> 6 KEY: 140902N
>>
>> TKS
>>
>> PU4YOU
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/290ff6da/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 16
>> Date: Wed, 4 Jul 2018 09:06:29 -0500
>> From: Dennis Wage <dwage at dwage.com>
>> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CAE1d062sy4JN0ySc=5EH0yfu_w10HzbxEm52hqG7Ju+n4Ph-5A@
>> mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> You should be able to leave the "TONE" column empty, which means the
>> values
>> in rToneFreq, cToneFreq will be ignored. And like you said those columns
>> cannot be empty. If you do leave them empty, Chirp by default will add
>> 88.5
>> as extraneous data that will be ignored.
>>
>> Hope this helps.
>>
>> DW
>>
>>
>> Dennis M. Wage (W9BOQ)
>>
>> 245 Corum Hill Road
>> Castalian Springs, TN 37031
>> (615) 310-4242 Cell
>> (615) 562-5128 Home
>> http://hammondb3organ.net
>> http://overdubs.net
>>
>> On Wed, Jul 4, 2018 at 8:48 AM, <survivor at cryptolab.net> wrote:
>>
>> >
>> > When I use Chirp to set radio channels, there are many columns I cannot
>> > let empty, unless I cannot save it or uploat to radio. Most repeaters
>> here
>> > have no subtone and I cannot let tone column empty, or null or zero. In
>> > chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
>> > the transceiver in frequency mode and ajust to repeater channel, I can
>> hear
>> > people talking normally. When I power on in channel mode and choose the
>> > respective channel with the same frequency, I cannot hear people
>> talking.
>> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
>> How
>> > to I solve this?
>> > I have a Baofeng UV-82 WITH 8 Watts (HP).
>> > Firmware
>> > 3 KEY: N822413
>> > 6 KEY: 140902N
>> >
>> > TKS
>> >
>> > PU4YOU
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Dennis Wage at dwage at dwage.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/dc44c8b2/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 17
>> Date: Wed, 4 Jul 2018 14:06:50 +0000
>> From: neil b <ne.b at hotmail.co.uk>
>> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CWLP265MB0450E66ADC3E013A75B0F454D5410 at CWLP265MB0450.
>> GBRP265.PROD.OUTLOOK.COM>
>>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> typical uk repeater
>>
>> first column
>>
>> freq - 145.625
>> name - gb3nw
>> tone mode - tone
>> tone - 67
>> next few are empty
>> duplex is - (minus)
>> offset - 0.6
>> mode -fm
>> power - high
>>
>>
>>
>> ----- Original Message -----
>> From: survivor at cryptolab.net<mailto:survivor at cryptolab.net>
>> To: chirp_users at intrepid.danplanet.com<mailto:chirp_
>> users at intrepid.danplanet.com>
>> Sent: Wednesday, July 04, 2018 2:48 PM
>> Subject: [chirp_users] How to empty or null tone channel in Chirp?
>>
>>
>>
>> When I use Chirp to set radio channels, there are many columns I cannot
>> let empty, unless I cannot save it or uploat to radio. Most repeaters here
>> have no subtone and I cannot let tone column empty, or null or zero. In
>> chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
>> the transceiver in frequency mode and ajust to repeater channel, I can hear
>> people talking normally. When I power on in channel mode and choose the
>> respective channel with the same frequency, I cannot hear people talking.
>> Pearhaps, tone values are wrong and in most cases they are unnecessary. How
>> to I solve this?
>> I have a Baofeng UV-82 WITH 8 Watts (HP).
>> Firmware
>> 3 KEY: N822413
>> 6 KEY: 140902N
>>
>> TKS
>>
>> PU4YOU
>>
>> ________________________________
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to m1cfk at ne.b at hotmail.co.uk
>> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/554e074f/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 18
>> Date: Wed, 4 Jul 2018 09:29:00 -0500
>> From: Dennis Wage <dwage at dwage.com>
>> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CAE1d062Qh+2OiiFJbj1morNGNZB2v3y1oxsBGoBg
>> xVCQC784GQ at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Dennis M. Wage (W9BOQ)
>>
>> 245 Corum Hill Road
>> Castalian Springs, TN 37031
>> (615) 310-4242 Cell
>> (615) 562-5128 Home
>> http://hammondb3organ.net
>> http://overdubs.net
>>
>> On Wed, Jul 4, 2018 at 9:06 AM, neil b <ne.b at hotmail.co.uk> wrote:
>>
>> > typical uk repeater
>> >
>> > first column
>> >
>> > freq - 145.625
>> > name - gb3nw
>> > tone mode - tone
>> > tone - 67
>> > next few are empty
>> > duplex is - (minus)
>> > offset - 0.6
>> > mode -fm
>> > power - high
>> >
>> >
>> >
>> >
>> > ----- Original Message -----
>> > *From:* survivor at cryptolab.net
>> > *To:* chirp_users at intrepid.danplanet.com
>> > *Sent:* Wednesday, July 04, 2018 2:48 PM
>> > *Subject:* [chirp_users] How to empty or null tone channel in Chirp?
>> >
>> >
>> > When I use Chirp to set radio channels, there are many columns I cannot
>> > let empty, unless I cannot save it or uploat to radio. Most repeaters
>> here
>> > have no subtone and I cannot let tone column empty, or null or zero. In
>> > chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
>> > the transceiver in frequency mode and ajust to repeater channel, I can
>> hear
>> > people talking normally. When I power on in channel mode and choose the
>> > respective channel with the same frequency, I cannot hear people
>> talking.
>> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
>> How
>> > to I solve this?
>> > I have a Baofeng UV-82 WITH 8 Watts (HP).
>> > Firmware
>> > 3 KEY: N822413
>> > 6 KEY: 140902N
>> >
>> > TKS
>> >
>> > PU4YOU
>> >
>> > ------------------------------
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to m1cfk at ne.b at hotmail.co.uk
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Dennis Wage at dwage at dwage.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe@
>> > intrepid.danplanet.com
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/3d3c8a83/attachment-0001.html
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: image.png
>> Type: image/png
>> Size: 27035 bytes
>> Desc: not available
>> Url : http://intrepid.danplanet.com/pipermail/chirp_users/
>> attachments/20180704/3d3c8a83/attachment-0001.png
>>
>> ------------------------------
>>
>> Message: 19
>> Date: Wed, 4 Jul 2018 10:34:11 -0400
>> From: Jim Unroe <rock.unroe at gmail.com>
>> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>>         <CADnO8U50fk4qbNTrhLekxvrM7KWBD2+SAC-H=WXuhD454Kx+qQ at mail.
>> gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> On Wed, Jul 4, 2018 at 9:48 AM,  <survivor at cryptolab.net> wrote:
>> >
>> > When I use Chirp to set radio channels, there are many columns I cannot
>> let
>> > empty, unless I cannot save it or uploat to radio. Most repeaters here
>> have
>> > no subtone and I cannot let tone column empty, or null or zero. In
>> chirp,
>> > there is a preseted tone list from 67.0 to 254.1. When I power on the
>> > transceiver in frequency mode and ajust to repeater channel, I can hear
>> > people talking normally. When I power on in channel mode and choose the
>> > respective channel with the same frequency, I cannot hear people
>> talking.
>> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
>> How
>> > to I solve this?
>> > I have a Baofeng UV-82 WITH 8 Watts (HP).
>> > Firmware
>> > 3 KEY: N822413
>> > 6 KEY: 140902N
>> >
>> > TKS
>> >
>> > PU4YOU
>>
>> Setting Tone Mode to "(None)" is the same has having menu 10 (R-DCS),
>> 11 (R-CTCS), 12 (T-DCS) and 13 (T-CTCS) set to OFF. If the Tone,
>> ToneSql, DTCS Code, DTCS Rx Code DTCS Pol and Cross Mode columns don't
>> show up as blank, then click "View" in the menu bar and enable "Hide
>> unused fields" (which is the default on new CHIRP installations). Even
>> when this setting is not enabled, the values in these columns are
>> ignored.
>>
>> The values in the columns mentioned above a only recognized when they
>> are enabled by the selected Tone Mode. And then only the columns
>> required by that mode are paid attention to. For example...
>>
>> Tone Mode: Columns
>> (None):
>> Tone: Tone
>> TSQL: ToneSql
>> DTCS: DTCS Code, DTCS Pol
>>
>> For more details review either of the "columns" guides linked here:
>> http://www.miklor.com/COM/UV_CHIRP.php#guides
>>
>> Jim KC9HI
>>
>>
>> ------------------------------
>>
>> Message: 20
>> Date: Wed, 4 Jul 2018 09:55:20 -0500
>> From: Dennis Wage <dwage at dwage.com>
>> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> M
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dennis Wage at dwage at dwage.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/7bbf3568/attachment-0002.html 


More information about the chirp_users mailing list