[chirp_users] chirp_users Digest, Vol 115, Issue 2

Brian Burke burke.n0imd at gmail.com
Wed Jul 4 12:13:56 PDT 2018


Any chance this software will work with a commercial Kenwood TK-805?

On Wed, Jul 4, 2018, 15:05 <chirp_users-request at intrepid.danplanet.com>
wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Re: CSV Partial Load (Jean-Paul Louis)
>    2. Re: CSV Partial Load (Aubrey Turner)
>    3. Re: CSV Partial Load (Ken FitzGerald-Smith)
>    4. Re: CSV Partial Load (Jim Unroe)
>    5. Re: CSV Partial Load (Jim Unroe)
>    6. Re: Chirp began ten years ago today... (W. T. Jones)
>    7. Re: CSV Partial Load (Nigel A. Gunn  G8IFF/W8IFF)
>    8. fail programming a Jetstream JT270M (Patricia Wilson)
>    9. Re: fail programming a Jetstream JT270M (Jim Unroe)
>   10. Re: fail programming a Jetstream JT270M (Patricia Wilson)
>   11. Re: CSV Partial Load (Dennis Wage)
>   12. Re: Chirp began ten years ago today... (Chuck Hast)
>   13. Re: Chirp began ten years ago today... (mike-2007 at elp.rr.com)
>   14. Re: Chirp began ten years ago today... (Dennis Wage)
>   15. How to empty or null tone channel in Chirp?
>       (survivor at cryptolab.net)
>   16. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>   17. Re: How to empty or null tone channel in Chirp? (neil b)
>   18. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>   19. Re: How to empty or null tone channel in Chirp? (Jim Unroe)
>   20. Re: How to empty or null tone channel in Chirp? (Dennis Wage)
>   21. IC-92AD funnies (Chuck Hast)
>   22. Re: IC-92AD funnies (Chuck Hast)
>   23. Re: Chirp began ten years ago today... (BobJ)
>   24. Re: Chirp began ten years ago today... (Dennis Wage)
>   25. Re: Chirp began ten years ago today... (Glenn Ervin)
>   26. Re: Chirp began ten years ago today...
>       (Nigel A. Gunn  G8IFF/W8IFF)
>   27. Re: Chirp began ten years ago today... (Chuck Hast)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 3 Jul 2018 15:02:06 -0400
> From: Jean-Paul Louis <louijp at yahoo.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <0BE7A004-925C-4FE2-9218-364F1C569DC5 at yahoo.com>
> Content-Type: text/plain;       charset=utf-8
>
> I think that you have a problem with the NAMES of the channels. NAMES
> should not have a space as this break the rules of CSV files.
> Try replacing the spaces with ?_? and that might work a lot better.
>
> Just my $0.02,
> Jean-Paul
> N1JPL
>
>
> > On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> >
> > I just trimmed off all the punctuation spaces and made names 8
> characters or less.  Same problem, it imports and shows channels 0-34 fine
> but stops at 34 with errors:
> >
> > Line 35: [rtone] could not convert string to float:
> >
> > Line 36: [rtone] could not convert string to float:
> >
> > Line 37: [rtone] could not convert string to float:
> >
> > Line 38: [rtone] could not convert string to float:
> > ...
> >
> > to the end of the list just after channel 70cm Cal:
> >
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >
> > Something is happening here between 33 and 34.
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Jean-Paul Louis at louijp at yahoo.com
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 3 Jul 2018 14:14:38 -0500
> From: Aubrey Turner <aubrey.c.turner at gmail.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <d1ef62fc-1577-2d63-54aa-81ca27a15c02 at gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Actually, spaces are allowed in CSVs (in general just about everything
> other than a COMMA is fine since it's the comma that separates the
> fields).? And, we see that line 33 is loading (which also has a space).
>
> What I am seeing, however, is a lot more empty fields in line 34 than in
> the previous lines.? In particular, the warning from Chirp is for the
> 'rtone' column that it can't convert the string to a float.? In line 33
> this appears to have a value of 88.5 while it's empty on line 34.? I
> suggest looking at the values for the tone columns to see why these are
> blank (and/or why Chirp is expecting a value there).
>
> I also see from the history of this email chain that? you're using Excel
> to edit the CSV.? Excel is notorious for munging CSV files. You may want
> to use a text editor of some kind instead of Excel to make sure that the
> fields aren't getting messed up when the file is saved.
>
>
> On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
> > I think that you have a problem with the NAMES of the channels. NAMES
> should not have a space as this break the rules of CSV files.
> > Try replacing the spaces with ?_? and that might work a lot better.
> >
> > Just my $0.02,
> > Jean-Paul
> > N1JPL
> >
> >
> >> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> >>
> >> I just trimmed off all the punctuation spaces and made names 8
> characters or less.  Same problem, it imports and shows channels 0-34 fine
> but stops at 34 with errors:
> >>
> >> Line 35: [rtone] could not convert string to float:
> >>
> >> Line 36: [rtone] could not convert string to float:
> >>
> >> Line 37: [rtone] could not convert string to float:
> >>
> >> Line 38: [rtone] could not convert string to float:
> >> ...
> >>
> >> to the end of the list just after channel 70cm Cal:
> >>
> >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >>
> >> Something is happening here between 33 and 34.
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to Jean-Paul Louis at louijp at yahoo.com
> >> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 3 Jul 2018 20:45:05 +0100
> From: Ken FitzGerald-Smith <ei7dkb at logicatrium.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <36A3E9FC-E5A6-4A73-A05B-D53EBA681348 at logicatrium.com>
> Content-Type: text/plain; charset="utf-8"
>
> He needs values for all these fields in  your csv file: rToneFreq,
> cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep
>
> rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do
>
> DtcsCode needs to be valid too. First valid code is 023
>
> DtcsPolarity needs to be one of  [?NN', 'NR', 'RN', 'RR']
>
> Mode needs to be AM or FM at least
>
> TStep (tuning step) needs to be numeric! Zero will do
>
> So this:
>
> 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,,
>
> Needs to become this at a minimum:
>
> 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,,
>
> There is no problem with the / in the name, but remember if you see a
> conversion error like  ?String to Float? for any field, that indicates that
> you must supply at least a numeric value, not an empty field.
>
> I hope this helps
>
> Ken
>
> > On 3 Jul 2018, at 20:14, Aubrey Turner <aubrey.c.turner at gmail.com>
> wrote:
> >
> > Actually, spaces are allowed in CSVs (in general just about everything
> > other than a COMMA is fine since it's the comma that separates the
> > fields).  And, we see that line 33 is loading (which also has a space).
> >
> > What I am seeing, however, is a lot more empty fields in line 34 than in
> > the previous lines.  In particular, the warning from Chirp is for the
> > 'rtone' column that it can't convert the string to a float.  In line 33
> > this appears to have a value of 88.5 while it's empty on line 34.  I
> > suggest looking at the values for the tone columns to see why these are
> > blank (and/or why Chirp is expecting a value there).
> >
> > I also see from the history of this email chain that  you're using Excel
> > to edit the CSV.  Excel is notorious for munging CSV files. You may want
> > to use a text editor of some kind instead of Excel to make sure that the
> > fields aren't getting messed up when the file is saved.
> >
> >
> > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:
> >> I think that you have a problem with the NAMES of the channels. NAMES
> should not have a space as this break the rules of CSV files.
> >> Try replacing the spaces with ?_? and that might work a lot better.
> >>
> >> Just my $0.02,
> >> Jean-Paul
> >> N1JPL
> >>
> >>
> >>> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis at gmail.com> wrote:
> >>>
> >>> I just trimmed off all the punctuation spaces and made names 8
> characters or less.  Same problem, it imports and shows channels 0-34 fine
> but stops at 34 with errors:
> >>>
> >>> Line 35: [rtone] could not convert string to float:
> >>>
> >>> Line 36: [rtone] could not convert string to float:
> >>>
> >>> Line 37: [rtone] could not convert string to float:
> >>>
> >>> Line 38: [rtone] could not convert string to float:
> >>> ...
> >>>
> >>> to the end of the list just after channel 70cm Cal:
> >>>
> >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >>>
> >>> Something is happening here between 33 and 34.
> >>> _______________________________________________
> >>> chirp_users mailing list
> >>> chirp_users at intrepid.danplanet.com
> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>> This message was sent to Jean-Paul Louis at louijp at yahoo.com
> >>> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> <mailto:aubrey.c.turner at gmail.com>
> >> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
> chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <mailto:
> chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to Bitfarmer at ei7dkb at logicatrium.com <mailto:
> ei7dkb at logicatrium.com>
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
> chirp_users-unsubscribe at intrepid.danplanet.com>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/0a00f7b4/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Tue, 3 Jul 2018 16:38:21 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U52HAgcL8EQacRgwrpf+1HtasvyyF=
> yW50_PnF6LodMyw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Well one thing is starting at 34 you removed the default values for
> Tone, ToneSql, DTCS Code, DTCS Rx Code and DTCS Pol. They should be
> there even if they are not used. The Tone Mode value determines if
> they are used or not. And it looks like it is missing from all the
> memory rows.
>
> Jim
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 3 Jul 2018 16:43:25 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADnO8U6DjF8C_vMKArWksq0A2HW4mSDdYbs1VN3jr0BaaUo-aA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
>
> Program memory 31 using the CHIRP UI and then export it to a CSV file.
> That is what the others need to look like.
>
> Jim
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 3 Jul 2018 18:53:17 -0400
> From: "W. T. Jones" <wn3lif at gmail.com>
> Subject: Re: [chirp_users] Chirp began ten years ago today...
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CA+M-Wc_sa1=
> Rt880xOsggM3m-1PP2HRT4dcKxPy5GbZBELcxag at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks to All that made Chirp possible! Never knew there were so many.
>
>
>
> Regards,
>
> WT
> Real heroes do not wear capes. They wear dog tags, turnout gear, and
> badges!
>
> On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
>
> >
> >
> > *Thank you* to Team CHIRP.
> > An invaluable service to the Amateur Radio community.
> >
> > John  ?Miklor?   K3NXU
> >
> > http://www.miklor.com
> >
> > http://www.miklor.com/DMR/
> >
> >
> >
> >
> >
> > *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> > chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
> > *Sent:* Tuesday, July 3, 2018 2:32 PM
> >
> > *To:* Discussion of CHIRP
> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> >
> >
> >
> > *yes this program has saved a lot of hours*
> >
> > *thanks for it*
> >
> >
> >
> > *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT, SKYWARN
> > 128A*
> >
> >
> >
> >
> > ------------------------------
> >
> > *From:* chirp_users-bounces at intrepid.danplanet.com <
> > chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman Sebern <
> > nsebern14 at gmail.com>
> > *Sent:* Tuesday, July 3, 2018 10:38 AM
> > *To:* Discussion of CHIRP
> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> >
> >
> >
> > Thank YOU.
> >
> >
> >
> >
> >
> >
> >
> > On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
> >
> > Congratulations on reaching your 10 year milestone with such a great
> piece
> > of software!
> > As a fairly new Ham, it's made my life a lot easier.
> > Thank you!
> >
> > 73s
> > Frank
> > K1HLZ
> >
> > On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com> wrote:
> >
> > Hi all,
> >
> > I just wanted to share a milestone in the CHIRP project with the
> community. Ten years ago today, on July 3rd 2008, I made the first commit
> to the repository which started the chirp project:
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
> >
> > It was just a rough bit of code that could talk to an Icom IC-92AD and I
> was apparently thinking of calling it "repidr". I do not recall what that
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
> >
> > By July 19th, I was ready to make something available, which was just
> able to read and write CSV files, and talk to Icom IC-9x radios and the
> ID-800H. This was the first version 0.1.1:
> >
> >
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
> >
> > I still remember the large stack of paper on the corner of my desk where
> I had written out tons of hex, all in pencil, erased and re-written many
> times, trying to decode the first few radio memories and looking for
> patterns to make it easier.
> >
> > The project has come a long way since then, largely due to the help and
> involvement of other volunteers and users. While the first release
> supported two radio models, the latest one supports 228 distinct models,
> with more if you count the many clones that exist. The users mailing list
> has a fairly amazing 2892 people subscribed, from all over the world,
> representing a tiny fraction of the total user base.
> >
> > So, I just want to thank all the people who have made CHIRP possible and
> successful. Especially contributors of code, bug reports, and test reports,
> but also people who have spent hours on this list helping others and being
> the support system that allows volunteer developers to focus on what they
> do best. Thanks to anyone who has ever sent a donation, as well as the
> commercial outfits who have contributed radios and other help. There are
> too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
> that come to mind as having a substantial impact.
> >
> > At the end of this email is a very rough list of all the code
> contributors to the project, extracted from the repository with minimal
> attempts to squash some duplicates. These are the rock stars that have
> gotten us to where we are today, so please join me in thanking them for
> spending their nights and weekends making this project the success that it
> is today!
> >
> > --Dan
> >
> >
> > Commits Contributor
> > -------|
> >
> > ------------------------------
> >
> >
> >    1865 Dan Smith
> >     240 Jim Unroe
> >     189 Tom Hayward
> >     188 Marco Filippi
> >     137 Zach Welch
> >      59 Jens Jensen
> >      58 Pavel Milanes (CO7WT)
> >      26 K. Arvanitis
> >      15 Tyler Tidman
> >      12 Richard Cochran
> >      10 Dan Drogichen
> >       8 Sean Burford
> >       8 Rick Farina
> >       8 Michael Wagner
> >       8 Eric Allen
> >       8 Brian Dickman
> >       7 SASANO Takayoshi
> >       6 Vernon Mauery
> >       6 Ron Wellsted
> >       6 Rhett Robinson
> >       6 Ray Cielencki
> >       5 Rick DeWitt
> >       5 Keith Williamson
> >       4 Tim Smith
> >       4 Nicolas Pike
> >       4 Mathias Weyland
> >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> >       4 David Griffith
> >       4 Chris Fosnight
> >       4 Angus Ainslie
> >       4 Alexey K
> >       3 Rick Farina
> >       3 Leo B?rring
> >       3 Jon K Hellan
> >       3 Christopher Hoover
> >       3 Ben Smith
> >       2 Richard Birch
> >       2 Nathan Crapo
> >       2 Michal Demin
> >       2 Louie Ilievski
> >       2 Johan Adler
> >       2 Dean Gibson
> >       2 Cody P Schafer
> >       1 Windsor Schmidt
> >       1 Wade Simmons
> >       1 Stuart Tener
> >       1 Steve Conklin
> >       1 Ryan Tourge K2RRT x
> >       1 Robert Terzi
> >       1 Robert Morris
> >       1 Patrik Nilsson
> >       1 nytowl
> >       1 Nolan Darilek
> >       1 nicolas jon pike
> >       1 Mike Pittaro
> >       1 Michal D
> >       1 Michael Lippold
> >       1 Mark Adams
> >       1 loudawgucr at gmail.com
> >       1 Krystian SP6IT
> >       1 kc1ckh at arrl.net
> >       1 Jeremy McDermond
> >       1 James Lee N1DDK
> >       1 Imuli
> >       1 Eric Dropps
> >       1 Ed Santiago
> >       1 Declan Rieb
> >       1 David Fannin
> >       1 Dave Allan
> >       1 Dale Tyler
> >       1 Charles Stewart
> >       1 Brett Bump
> >       1 Brad Ackerman
> >       1 Attilio Pannella
> >       1 Andrew
> >       1 Adam Coddington
> >       1 ac2lq
> >       1 Aaron Pelly
> >
> > ------------------------------
> >
> >
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to FRANK G at k1hlz at pcicon.net
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> >
> >
> > --
> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Norman Sebern at nsebern14 at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to WT at wn3lif at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/ea5689fe/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Tue, 3 Jul 2018 19:08:19 -0400 (EDT)
> From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel at ngunn.net>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,
>         imatglamis <imatglamis at gmail.com>
> Message-ID: <677469876.85416.1530659299549 at email.1and1.com>
> Content-Type: text/plain; charset="utf-8"
>
> Your frequency doesn't conform to an acceptable frequency step?
>
>
> > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
> >
> >     I just trimmed off all the punctuation spaces and made names 8
> characters or less.  Same problem, it imports and shows channels 0-34 fine
> but stops at 34 with errors:
> >
> >     Line 35: [rtone] could not convert string to float:
> >
> >     Line 36: [rtone] could not convert string to float:
> >
> >     Line 37: [rtone] could not convert string to float:
> >
> >     Line 38: [rtone] could not convert string to float:
> >     ...
> >
> >     to the end of the list just after channel 70cm Cal:
> >
> >     31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >     32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >     33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> >     34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> >     35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> >     36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >
> >     Something is happening here between 33 and 34.
> >     _______________________________________________
> >     chirp_users mailing list
> >     chirp_users at intrepid.danplanet.com
> >     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> >     To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> >
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937
> 825 5032
> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
> http://www.ngunn.net
> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> International #385,
> Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/28a00e15/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Tue, 3 Jul 2018 16:30:34 -0700
> From: Patricia Wilson <wilson.pr.gm at gmail.com>
> Subject: [chirp_users] fail programming a Jetstream JT270M
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAAwRy+ROdfSYwuKNceArVo3WsCOi+zCQTnr8bn9zrdrb=
> nZNVA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I am attempting to program a Jetstream JT270M using a Prolific cable.
>
> The CHIRP Error message pop-up says
>
> An error has occurred
> could not open com4 (Error 2) The system can not find the file specified.
>
> In the WIN10 Device manager listing for COM4 it says
> Driver provide is prolific
> Date is 10-17-2017
> Version is 3.8.18.0
>
> Device status is
> This device cannot start. (Code 10)
> A device which does not exist was specified.
>
> Can anyone help me out with this?
>
>
>
>
> --
>
> Patricia Wilson
> Apache Junction, AZ
> Member NRA, ARRL
> WB8DXX (Extra)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/b3a2feed/attachment-0001.html
>
> ------------------------------
>
> Message: 9
> Date: Tue, 3 Jul 2018 19:39:39 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] fail programming a Jetstream JT270M
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADnO8U5mLqAqAvcaHt8ZAJ_24ZWCzQqxK4GZ0cKruK39jvMaEg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> > The CHIRP Error message pop-up says
> >
> > An error has occurred
> > could not open com4 (Error 2) The system can not find the file specified.
> >
> > In the WIN10 Device manager listing for COM4 it says
> > Driver provide is prolific
> > Date is 10-17-2017
> > Version is 3.8.18.0
> >
> > Device status is
> > This device cannot start. (Code 10)
> > A device which does not exist was specified.
> >
> > Can anyone help me out with this?
>
> This is a common problem, You must download, install and select an
> older Prolific device driver (V3.2.0.0 ). This page has a link to the
> device driver and instructions for installing it.
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 10
> Date: Tue, 3 Jul 2018 17:27:20 -0700
> From: Patricia Wilson <wilson.pr.gm at gmail.com>
> Subject: Re: [chirp_users] fail programming a Jetstream JT270M
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <CAAwRy+Tp69WhocVuPLVtTjRHA+sD1Dxb3WcG=
> y-mEbN7nnV0uw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I had tried that and somehow screwed up. This time around SUCCESS!!! Thank
> you ever so much and
>
> CONGRATS to Dan on the 10th anniversary.
>
> On Tue, Jul 3, 2018 at 4:40 PM Jim Unroe <rock.unroe at gmail.com> wrote:
>
> > > The CHIRP Error message pop-up says
> > >
> > > An error has occurred
> > > could not open com4 (Error 2) The system can not find the file
> specified.
> > >
> > > In the WIN10 Device manager listing for COM4 it says
> > > Driver provide is prolific
> > > Date is 10-17-2017
> > > Version is 3.8.18.0
> > >
> > > Device status is
> > > This device cannot start. (Code 10)
> > > A device which does not exist was specified.
> > >
> > > Can anyone help me out with this?
> >
> > This is a common problem, You must download, install and select an
> > older Prolific device driver (V3.2.0.0 ). This page has a link to the
> > device driver and instructions for installing it.
> >
> > http://www.miklor.com/COM/UV_Drivers.php
> >
> > Jim KC9HI
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Patricia Wilson at wilson.pr.gm at gmail.com
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
>
>
> --
>
> Patricia Wilson
> Apache Junction, AZ
> Member NRA, ARRL
> WB8DXX (Extra)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/93a7464e/attachment-0001.html
>
> ------------------------------
>
> Message: 11
> Date: Tue, 3 Jul 2018 22:12:41 -0500
> From: Dennis Wage <dwage at dwage.com>
> Subject: Re: [chirp_users] CSV Partial Load
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAE1d062WotJGkESaQTQ0RqwQxy_hCh8L-xU52YWUAXVg667XzQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> ??
> Columns G, H, I, J, and L require data be in the CSV file. Of these columns
> some will produce a Chirp error but if you continue Chirp will kindly fill
> in dummy data. And some of the columns require data, that if not there will
> stop the import.
> I just don't have time to research and tell you which. But simply put, put
> data in all fields.
>
> This will work:
> 88.5 88.5 23 NN FM 5 and so will this:
> 67 67 23 NN FM 5
> Your rTone on channel 57, line 58 is wrong too.
>
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
> On Tue, Jul 3, 2018 at 6:08 PM, Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net
> >
> wrote:
>
> > Your frequency doesn't conform to an acceptable frequency step?
> >
> >
> > On 03 July 2018 at 14:50 imatglamis <imatglamis at gmail.com> wrote:
> >
> > I just trimmed off all the punctuation spaces and made names 8 characters
> > or less.  Same problem, it imports and shows channels 0-34 fine but stops
> > at 34 with errors:
> >
> > Line 35: [rtone] could not convert string to float:
> >
> > Line 36: [rtone] could not convert string to float:
> >
> > Line 37: [rtone] could not convert string to float:
> >
> > Line 38: [rtone] could not convert string to float:
> > ...
> >
> > to the end of the list just after channel 70cm Cal:
> >
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,
> >
> > Something is happening here between 33 and 34.
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
> 937
> > 825 5032
> > Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
> > http://www.ngunn.net
> > Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> > International #385,
> > Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Dennis Wage at dwage at dwage.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/c4cdd456/attachment-0001.html
>
> ------------------------------
>
> Message: 12
> Date: Tue, 3 Jul 2018 23:51:12 -0500
> From: Chuck Hast <kp4djt at gmail.com>
> Subject: Re: [chirp_users] Chirp began ten years ago today...
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAN9xdP80-orjA2bSoXvSeMaGkD_SwiDLzEbUwc8bb40FNEDQtg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Dan,
> First a big hat off to you and all on that list for the great work and
> piece of art.
> It is funny, I was working in Kalama WA in a newly opened glass plant, the
> company that
> I worked for had sold them the fore hearths and glass container inspection
> machines. My
> job was to bring those machines on line and then train and shepherd those
> folks in the
> inspections of the bottles. I had tons of overtime so I toddled down to HRO
> in PDX and
> got me a 92AT. That was I think in late Aug 2008 or Sept. I know it had not
> started raining
> yet and the weather was still good. It was one of the folks at HRO that
> aimed me your
> direction I believe it was. I did not know that the project was that new. I
> do not remember
> when I downloaded the first code, but it worked on that 92AT (I still have
> it).
>
> By way I now live in Oklahoma, but I sure miss the NW...
>
> Looks like I joined the list on 20 Jun 2009.
>
> On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <wn3lif at gmail.com> wrote:
>
> > Thanks to All that made Chirp possible! Never knew there were so many.
> >
> >
> >
> > Regards,
> >
> > WT
> > Real heroes do not wear capes. They wear dog tags, turnout gear, and
> > badges!
> >
> > On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:
> >
> >>
> >>
> >> *Thank you* to Team CHIRP.
> >> An invaluable service to the Amateur Radio community.
> >>
> >> John  ?Miklor?   K3NXU
> >>
> >> http://www.miklor.com
> >>
> >> http://www.miklor.com/DMR/
> >>
> >>
> >>
> >>
> >>
> >> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> >> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Barry K
> >> *Sent:* Tuesday, July 3, 2018 2:32 PM
> >>
> >> *To:* Discussion of CHIRP
> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> >>
> >>
> >>
> >> *yes this program has saved a lot of hours*
> >>
> >> *thanks for it*
> >>
> >>
> >>
> >> *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,
> >> SKYWARN 128A*
> >>
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> *From:* chirp_users-bounces at intrepid.danplanet.com <
> >> chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman Sebern
> <
> >> nsebern14 at gmail.com>
> >> *Sent:* Tuesday, July 3, 2018 10:38 AM
> >> *To:* Discussion of CHIRP
> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...
> >>
> >>
> >>
> >> Thank YOU.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:
> >>
> >> Congratulations on reaching your 10 year milestone with such a great
> >> piece of software!
> >> As a fairly new Ham, it's made my life a lot easier.
> >> Thank you!
> >>
> >> 73s
> >> Frank
> >> K1HLZ
> >>
> >> On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com> wrote:
> >>
> >> Hi all,
> >>
> >> I just wanted to share a milestone in the CHIRP project with the
> community. Ten years ago today, on July 3rd 2008, I made the first commit
> to the repository which started the chirp project:
> >>
> >>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
> >>
> >> It was just a rough bit of code that could talk to an Icom IC-92AD and
> I was apparently thinking of calling it "repidr". I do not recall what that
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> >>
> >>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
> >>
> >> By July 19th, I was ready to make something available, which was just
> able to read and write CSV files, and talk to Icom IC-9x radios and the
> ID-800H. This was the first version 0.1.1:
> >>
> >>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
> >>
> >> I still remember the large stack of paper on the corner of my desk
> where I had written out tons of hex, all in pencil, erased and re-written
> many times, trying to decode the first few radio memories and looking for
> patterns to make it easier.
> >>
> >> The project has come a long way since then, largely due to the help and
> involvement of other volunteers and users. While the first release
> supported two radio models, the latest one supports 228 distinct models,
> with more if you count the many clones that exist. The users mailing list
> has a fairly amazing 2892 people subscribed, from all over the world,
> representing a tiny fraction of the total user base.
> >>
> >> So, I just want to thank all the people who have made CHIRP possible
> and successful. Especially contributors of code, bug reports, and test
> reports, but also people who have spent hours on this list helping others
> and being the support system that allows volunteer developers to focus on
> what they do best. Thanks to anyone who has ever sent a donation, as well
> as the commercial outfits who have contributed radios and other help. There
> are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a
> few that come to mind as having a substantial impact.
> >>
> >> At the end of this email is a very rough list of all the code
> contributors to the project, extracted from the repository with minimal
> attempts to squash some duplicates. These are the rock stars that have
> gotten us to where we are today, so please join me in thanking them for
> spending their nights and weekends making this project the success that it
> is today!
> >>
> >> --Dan
> >>
> >>
> >> Commits Contributor
> >> -------|
> >>
> >> ------------------------------
> >>
> >>
> >>    1865 Dan Smith
> >>     240 Jim Unroe
> >>     189 Tom Hayward
> >>     188 Marco Filippi
> >>     137 Zach Welch
> >>      59 Jens Jensen
> >>      58 Pavel Milanes (CO7WT)
> >>      26 K. Arvanitis
> >>      15 Tyler Tidman
> >>      12 Richard Cochran
> >>      10 Dan Drogichen
> >>       8 Sean Burford
> >>       8 Rick Farina
> >>       8 Michael Wagner
> >>       8 Eric Allen
> >>       8 Brian Dickman
> >>       7 SASANO Takayoshi
> >>       6 Vernon Mauery
> >>       6 Ron Wellsted
> >>       6 Rhett Robinson
> >>       6 Ray Cielencki
> >>       5 Rick DeWitt
> >>       5 Keith Williamson
> >>       4 Tim Smith
> >>       4 Nicolas Pike
> >>       4 Mathias Weyland
> >>       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> >>       4 David Griffith
> >>       4 Chris Fosnight
> >>       4 Angus Ainslie
> >>       4 Alexey K
> >>       3 Rick Farina
> >>       3 Leo B?rring
> >>       3 Jon K Hellan
> >>       3 Christopher Hoover
> >>       3 Ben Smith
> >>       2 Richard Birch
> >>       2 Nathan Crapo
> >>       2 Michal Demin
> >>       2 Louie Ilievski
> >>       2 Johan Adler
> >>       2 Dean Gibson
> >>       2 Cody P Schafer
> >>       1 Windsor Schmidt
> >>       1 Wade Simmons
> >>       1 Stuart Tener
> >>       1 Steve Conklin
> >>       1 Ryan Tourge K2RRT x
> >>       1 Robert Terzi
> >>       1 Robert Morris
> >>       1 Patrik Nilsson
> >>       1 nytowl
> >>       1 Nolan Darilek
> >>       1 nicolas jon pike
> >>       1 Mike Pittaro
> >>       1 Michal D
> >>       1 Michael Lippold
> >>       1 Mark Adams
> >>       1 loudawgucr at gmail.com
> >>       1 Krystian SP6IT
> >>       1 kc1ckh at arrl.net
> >>       1 Jeremy McDermond
> >>       1 James Lee N1DDK
> >>       1 Imuli
> >>       1 Eric Dropps
> >>       1 Ed Santiago
> >>       1 Declan Rieb
> >>       1 David Fannin
> >>       1 Dave Allan
> >>       1 Dale Tyler
> >>       1 Charles Stewart
> >>       1 Brett Bump
> >>       1 Brad Ackerman
> >>       1 Attilio Pannella
> >>       1 Andrew
> >>       1 Adam Coddington
> >>       1 ac2lq
> >>       1 Aaron Pelly
> >>
> >> ------------------------------
> >>
> >>
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to FRANK G at k1hlz at pcicon.net
> >> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> >>
> >>
> >> --
> >> Sent from my Android device with K-9 Mail. Please excuse my brevity.
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to Norman Sebern at nsebern14 at gmail.com
> >> To unsubscribe, send an email to
> >> chirp_users-unsubscribe at intrepid.danplanet.com
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to WT at wn3lif at gmail.com
> >> To unsubscribe, send an email to
> >> chirp_users-unsubscribe at intrepid.danplanet.com
> >>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Chuck Hast at kp4djt at gmail.com
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> --
> Chirp + Editcp + MD380Tools on Linux
> Celestial!!!
> Chuck -- KP4DJT
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/4a16ee0c/attachment-0001.html
>
> ------------------------------
>
> Message: 13
> Date: Wed, 4 Jul 2018 06:24:13 -0600
> From: <mike-2007 at elp.rr.com>
> Subject: Re: [chirp_users] Chirp began ten years ago today...
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <009e01d41391$ed23a970$c76afc50$@elp.rr.com>
> Content-Type: text/plain;       charset="utf-8"
>
> Congratulations, and thanks for all the hard work.  Few will actually
> realize the dedication it takes to do this for 10 years, and without profit.
>
> Vy73 ? Mike ? KD5KC
> El Paso, Texas ? DM61rt
>
>
>
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
> Sent: Tuesday, July 3, 2018 7:25 AM
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Subject: [chirp_users] Chirp began ten years ago today...
>
> Hi all,
>
> I just wanted to share a milestone in the CHIRP project with the
> community. Ten years ago today, on July 3rd 2008, I made the first commit
> to the repository which started the chirp project:
>
>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb
>
> It was just a rough bit of code that could talk to an Icom IC-92AD and I
> was apparently thinking of calling it "repidr". I do not recall what that
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:
>
>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b
>
> By July 19th, I was ready to make something available, which was just able
> to read and write CSV files, and talk to Icom IC-9x radios and the ID-800H.
> This was the first version 0.1.1:
>
>
> https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7
>
> I still remember the large stack of paper on the corner of my desk where I
> had written out tons of hex, all in pencil, erased and re-written many
> times, trying to decode the first few radio memories and looking for
> patterns to make it easier.
>
> The project has come a long way since then, largely due to the help and
> involvement of other volunteers and users. While the first release
> supported two radio models, the latest one supports 228 distinct models,
> with more if you count the many clones that exist. The users mailing list
> has a fairly amazing 2892 people subscribed, from all over the world,
> representing a tiny fraction of the total user base.
>
> So, I just want to thank all the people who have made CHIRP possible and
> successful. Especially contributors of code, bug reports, and test reports,
> but also people who have spent hours on this list helping others and being
> the support system that allows volunteer developers to focus on what they
> do best. Thanks to anyone who has ever sent a donation, as well as the
> commercial outfits who have contributed radios and other help. There are
> too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
> that come to mind as having a substantial impact.
>
> At the end of this email is a very rough list of all the code contributors
> to the project, extracted from the repository with minimal attempts to
> squash some duplicates. These are the rock stars that have gotten us to
> where we are today, so please join me in thanking them for spending their
> nights and weekends making this project the success that it is today!
>
> --Dan
>
>
> Commits Contributor
> -------|--------------------------------------------------
>    1865 Dan Smith
>     240 Jim Unroe
>     189 Tom Hayward
>     188 Marco Filippi
>     137 Zach Welch
>      59 Jens Jensen
>      58 Pavel Milanes (CO7WT)
>      26 K. Arvanitis
>      15 Tyler Tidman
>      12 Richard Cochran
>      10 Dan Drogichen
>       8 Sean Burford
>       8 Rick Farina
>       8 Michael Wagner
>       8 Eric Allen
>       8 Brian Dickman
>       7 SASANO Takayoshi
>       6 Vernon Mauery
>       6 Ron Wellsted
>       6 Rhett Robinson
>       6 Ray Cielencki
>       5 Rick DeWitt
>       5 Keith Williamson
>       4 Tim Smith
>       4 Nicolas Pike
>       4 Mathias Weyland
>       4 IT2 Stuart Blake Tener, USNR (N3GWG)
>       4 David Griffith
>       4 Chris Fosnight
>       4 Angus Ainslie
>       4 Alexey K
>       3 Rick Farina
>       3 Leo B?rring
>       3 Jon K Hellan
>       3 Christopher Hoover
>       3 Ben Smith
>       2 Richard Birch
>       2 Nathan Crapo
>       2 Michal Demin
>       2 Louie Ilievski
>       2 Johan Adler
>       2 Dean Gibson
>       2 Cody P Schafer
>       1 Windsor Schmidt
>       1 Wade Simmons
>       1 Stuart Tener
>       1 Steve Conklin
>       1 Ryan Tourge K2RRT x
>       1 Robert Terzi
>       1 Robert Morris
>       1 Patrik Nilsson
>       1 nytowl
>       1 Nolan Darilek
>       1 nicolas jon pike
>       1 Mike Pittaro
>       1 Michal D
>       1 Michael Lippold
>       1 Mark Adams
>       1 loudawgucr at gmail.com
>       1 Krystian SP6IT
>       1 kc1ckh at arrl.net
>       1 Jeremy McDermond
>       1 James Lee N1DDK
>       1 Imuli
>       1 Eric Dropps
>       1 Ed Santiago
>       1 Declan Rieb
>       1 David Fannin
>       1 Dave Allan
>       1 Dale Tyler
>       1 Charles Stewart
>       1 Brett Bump
>       1 Brad Ackerman
>       1 Attilio Pannella
>       1 Andrew
>       1 Adam Coddington
>       1 ac2lq
>       1 Aaron Pelly
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com To
> unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> ------------------------------
>
> Message: 14
> Date: Wed, 4 Jul 2018 07:48:57 -0500
> From: Dennis Wage <dwage at dwage.com>
> Subject: Re: [chirp_users] Chirp began ten years ago today...
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAE1d061W+AKz-b5bv+5yKMzAAEH-5Fo_400e69OH4YjPBhAndA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Don't be that guy. Donate now here:
> https://chirp.danplanet.com/projects/chirp/wiki/Download
>
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
> On Wed, Jul 4, 2018 at 7:24 AM, <mike-2007 at elp.rr.com> wrote:
>
> > Congratulations, and thanks for all the hard work.  Few will actually
> > realize the dedication it takes to do this for 10 years, and without
> profit.
> >
> > Vy73 ? Mike ? KD5KC
> > El Paso, Texas ? DM61rt
> >
> >
> >
> > -----Original Message-----
> > From: chirp_users-bounces at intrepid.danplanet.com <
> > chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Dan Smith
> > Sent: Tuesday, July 3, 2018 7:25 AM
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Subject: [chirp_users] Chirp began ten years ago today...
> >
> > Hi all,
> >
> > I just wanted to share a milestone in the CHIRP project with the
> > community. Ten years ago today, on July 3rd 2008, I made the first commit
> > to the repository which started the chirp project:
> >
> > https://chirp.danplanet.com/projects/chirp/repository/
> > revisions/31cfb1a376fb
> >
> > It was just a rough bit of code that could talk to an Icom IC-92AD and I
> > was apparently thinking of calling it "repidr". I do not recall what that
> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:
> >
> > https://chirp.danplanet.com/projects/chirp/repository/
> > revisions/646c121a847b
> >
> > By July 19th, I was ready to make something available, which was just
> able
> > to read and write CSV files, and talk to Icom IC-9x radios and the
> ID-800H.
> > This was the first version 0.1.1:
> >
> > https://chirp.danplanet.com/projects/chirp/repository/
> > revisions/1428729c41b7
> >
> > I still remember the large stack of paper on the corner of my desk where
> I
> > had written out tons of hex, all in pencil, erased and re-written many
> > times, trying to decode the first few radio memories and looking for
> > patterns to make it easier.
> >
> > The project has come a long way since then, largely due to the help and
> > involvement of other volunteers and users. While the first release
> > supported two radio models, the latest one supports 228 distinct models,
> > with more if you count the many clones that exist. The users mailing list
> > has a fairly amazing 2892 people subscribed, from all over the world,
> > representing a tiny fraction of the total user base.
> >
> > So, I just want to thank all the people who have made CHIRP possible and
> > successful. Especially contributors of code, bug reports, and test
> reports,
> > but also people who have spent hours on this list helping others and
> being
> > the support system that allows volunteer developers to focus on what they
> > do best. Thanks to anyone who has ever sent a donation, as well as the
> > commercial outfits who have contributed radios and other help. There are
> > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few
> > that come to mind as having a substantial impact.
> >
> > At the end of this email is a very rough list of all the code
> contributors
> > to the project, extracted from the repository with minimal attempts to
> > squash some duplicates. These are the rock stars that have gotten us to
> > where we are today, so please join me in thanking them for spending their
> > nights and weekends making this project the success that it is today!
> >
> > --Dan
> >
> >
> > Commits Contributor
> > -------|--------------------------------------------------
> >    1865 Dan Smith
> >     240 Jim Unroe
> >     189 Tom Hayward
> >     188 Marco Filippi
> >     137 Zach Welch
> >      59 Jens Jensen
> >      58 Pavel Milanes (CO7WT)
> >      26 K. Arvanitis
> >      15 Tyler Tidman
> >      12 Richard Cochran
> >      10 Dan Drogichen
> >       8 Sean Burford
> >       8 Rick Farina
> >       8 Michael Wagner
> >       8 Eric Allen
> >       8 Brian Dickman
> >       7 SASANO Takayoshi
> >       6 Vernon Mauery
> >       6 Ron Wellsted
> >       6 Rhett Robinson
> >       6 Ray Cielencki
> >       5 Rick DeWitt
> >       5 Keith Williamson
> >       4 Tim Smith
> >       4 Nicolas Pike
> >       4 Mathias Weyland
> >       4 IT2 Stuart Blake Tener, USNR (N3GWG)
> >       4 David Griffith
> >       4 Chris Fosnight
> >       4 Angus Ainslie
> >       4 Alexey K
> >       3 Rick Farina
> >       3 Leo B?rring
> >       3 Jon K Hellan
> >       3 Christopher Hoover
> >       3 Ben Smith
> >       2 Richard Birch
> >       2 Nathan Crapo
> >       2 Michal Demin
> >       2 Louie Ilievski
> >       2 Johan Adler
> >       2 Dean Gibson
> >       2 Cody P Schafer
> >       1 Windsor Schmidt
> >       1 Wade Simmons
> >       1 Stuart Tener
> >       1 Steve Conklin
> >       1 Ryan Tourge K2RRT x
> >       1 Robert Terzi
> >       1 Robert Morris
> >       1 Patrik Nilsson
> >       1 nytowl
> >       1 Nolan Darilek
> >       1 nicolas jon pike
> >       1 Mike Pittaro
> >       1 Michal D
> >       1 Michael Lippold
> >       1 Mark Adams
> >       1 loudawgucr at gmail.com
> >       1 Krystian SP6IT
> >       1 kc1ckh at arrl.net
> >       1 Jeremy McDermond
> >       1 James Lee N1DDK
> >       1 Imuli
> >       1 Eric Dropps
> >       1 Ed Santiago
> >       1 Declan Rieb
> >       1 David Fannin
> >       1 Dave Allan
> >       1 Dale Tyler
> >       1 Charles Stewart
> >       1 Brett Bump
> >       1 Brad Ackerman
> >       1 Attilio Pannella
> >       1 Andrew
> >       1 Adam Coddington
> >       1 ac2lq
> >       1 Aaron Pelly
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to mike-2007 at elp.rr.com at mike-2007 at elp.rr.com To
> > unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Dennis Wage at dwage at dwage.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/4c16af16/attachment-0001.html
>
> ------------------------------
>
> Message: 15
> Date: Wed, 04 Jul 2018 10:48:54 -0300
> From: survivor at cryptolab.net
> Subject: [chirp_users] How to empty or null tone channel in Chirp?
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <d8d337ecd37909ed5276af33628b3181 at cryptolab.net>
> Content-Type: text/plain; charset="us-ascii"
>
> When I use Chirp to set radio channels, there are many columns I cannot
> let empty, unless I cannot save it or uploat to radio. Most repeaters
> here have no subtone and I cannot let tone column empty, or null or
> zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I
> power on the transceiver in frequency mode and ajust to repeater
> channel, I can hear people talking normally. When I power on in channel
> mode and choose the respective channel with the same frequency, I cannot
> hear people talking. Pearhaps, tone values are wrong and in most cases
> they are unnecessary. How to I solve this?
> I have a Baofeng UV-82 WITH 8 Watts (HP).
> Firmware
> 3 KEY: N822413
> 6 KEY: 140902N
>
> TKS
>
> PU4YOU
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/290ff6da/attachment-0001.html
>
> ------------------------------
>
> Message: 16
> Date: Wed, 4 Jul 2018 09:06:29 -0500
> From: Dennis Wage <dwage at dwage.com>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CAE1d062sy4JN0ySc=
> 5EH0yfu_w10HzbxEm52hqG7Ju+n4Ph-5A at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> You should be able to leave the "TONE" column empty, which means the values
> in rToneFreq, cToneFreq will be ignored. And like you said those columns
> cannot be empty. If you do leave them empty, Chirp by default will add 88.5
> as extraneous data that will be ignored.
>
> Hope this helps.
>
> DW
>
>
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
> On Wed, Jul 4, 2018 at 8:48 AM, <survivor at cryptolab.net> wrote:
>
> >
> > When I use Chirp to set radio channels, there are many columns I cannot
> > let empty, unless I cannot save it or uploat to radio. Most repeaters
> here
> > have no subtone and I cannot let tone column empty, or null or zero. In
> > chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
> > the transceiver in frequency mode and ajust to repeater channel, I can
> hear
> > people talking normally. When I power on in channel mode and choose the
> > respective channel with the same frequency, I cannot hear people talking.
> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
> How
> > to I solve this?
> > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > Firmware
> > 3 KEY: N822413
> > 6 KEY: 140902N
> >
> > TKS
> >
> > PU4YOU
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Dennis Wage at dwage at dwage.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/dc44c8b2/attachment-0001.html
>
> ------------------------------
>
> Message: 17
> Date: Wed, 4 Jul 2018 14:06:50 +0000
> From: neil b <ne.b at hotmail.co.uk>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CWLP265MB0450E66ADC3E013A75B0F454D5410 at CWLP265MB0450.GBRP265.PROD.OUTLOOK.COM
> >
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> typical uk repeater
>
> first column
>
> freq - 145.625
> name - gb3nw
> tone mode - tone
> tone - 67
> next few are empty
> duplex is - (minus)
> offset - 0.6
> mode -fm
> power - high
>
>
>
> ----- Original Message -----
> From: survivor at cryptolab.net<mailto:survivor at cryptolab.net>
> To: chirp_users at intrepid.danplanet.com<mailto:
> chirp_users at intrepid.danplanet.com>
> Sent: Wednesday, July 04, 2018 2:48 PM
> Subject: [chirp_users] How to empty or null tone channel in Chirp?
>
>
>
> When I use Chirp to set radio channels, there are many columns I cannot
> let empty, unless I cannot save it or uploat to radio. Most repeaters here
> have no subtone and I cannot let tone column empty, or null or zero. In
> chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
> the transceiver in frequency mode and ajust to repeater channel, I can hear
> people talking normally. When I power on in channel mode and choose the
> respective channel with the same frequency, I cannot hear people talking.
> Pearhaps, tone values are wrong and in most cases they are unnecessary. How
> to I solve this?
> I have a Baofeng UV-82 WITH 8 Watts (HP).
> Firmware
> 3 KEY: N822413
> 6 KEY: 140902N
>
> TKS
>
> PU4YOU
>
> ________________________________
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to m1cfk at ne.b at hotmail.co.uk
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/554e074f/attachment-0001.html
>
> ------------------------------
>
> Message: 18
> Date: Wed, 4 Jul 2018 09:29:00 -0500
> From: Dennis Wage <dwage at dwage.com>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CAE1d062Qh+2OiiFJbj1morNGNZB2v3y1oxsBGoBgxVCQC784GQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Dennis M. Wage (W9BOQ)
>
> 245 Corum Hill Road
> Castalian Springs, TN 37031
> (615) 310-4242 Cell
> (615) 562-5128 Home
> http://hammondb3organ.net
> http://overdubs.net
>
> On Wed, Jul 4, 2018 at 9:06 AM, neil b <ne.b at hotmail.co.uk> wrote:
>
> > typical uk repeater
> >
> > first column
> >
> > freq - 145.625
> > name - gb3nw
> > tone mode - tone
> > tone - 67
> > next few are empty
> > duplex is - (minus)
> > offset - 0.6
> > mode -fm
> > power - high
> >
> >
> >
> >
> > ----- Original Message -----
> > *From:* survivor at cryptolab.net
> > *To:* chirp_users at intrepid.danplanet.com
> > *Sent:* Wednesday, July 04, 2018 2:48 PM
> > *Subject:* [chirp_users] How to empty or null tone channel in Chirp?
> >
> >
> > When I use Chirp to set radio channels, there are many columns I cannot
> > let empty, unless I cannot save it or uploat to radio. Most repeaters
> here
> > have no subtone and I cannot let tone column empty, or null or zero. In
> > chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
> > the transceiver in frequency mode and ajust to repeater channel, I can
> hear
> > people talking normally. When I power on in channel mode and choose the
> > respective channel with the same frequency, I cannot hear people talking.
> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
> How
> > to I solve this?
> > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > Firmware
> > 3 KEY: N822413
> > 6 KEY: 140902N
> >
> > TKS
> >
> > PU4YOU
> >
> > ------------------------------
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to m1cfk at ne.b at hotmail.co.uk
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Dennis Wage at dwage at dwage.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/3d3c8a83/attachment-0001.html
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image.png
> Type: image/png
> Size: 27035 bytes
> Desc: not available
> Url :
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/3d3c8a83/attachment-0001.png
>
> ------------------------------
>
> Message: 19
> Date: Wed, 4 Jul 2018 10:34:11 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U50fk4qbNTrhLekxvrM7KWBD2+SAC-H=
> WXuhD454Kx+qQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Wed, Jul 4, 2018 at 9:48 AM,  <survivor at cryptolab.net> wrote:
> >
> > When I use Chirp to set radio channels, there are many columns I cannot
> let
> > empty, unless I cannot save it or uploat to radio. Most repeaters here
> have
> > no subtone and I cannot let tone column empty, or null or zero. In chirp,
> > there is a preseted tone list from 67.0 to 254.1. When I power on the
> > transceiver in frequency mode and ajust to repeater channel, I can hear
> > people talking normally. When I power on in channel mode and choose the
> > respective channel with the same frequency, I cannot hear people talking.
> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
> How
> > to I solve this?
> > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > Firmware
> > 3 KEY: N822413
> > 6 KEY: 140902N
> >
> > TKS
> >
> > PU4YOU
>
> Setting Tone Mode to "(None)" is the same has having menu 10 (R-DCS),
> 11 (R-CTCS), 12 (T-DCS) and 13 (T-CTCS) set to OFF. If the Tone,
> ToneSql, DTCS Code, DTCS Rx Code DTCS Pol and Cross Mode columns don't
> show up as blank, then click "View" in the menu bar and enable "Hide
> unused fields" (which is the default on new CHIRP installations). Even
> when this setting is not enabled, the values in these columns are
> ignored.
>
> The values in the columns mentioned above a only recognized when they
> are enabled by the selected Tone Mode. And then only the columns
> required by that mode are paid attention to. For example...
>
> Tone Mode: Columns
> (None):
> Tone: Tone
> TSQL: ToneSql
> DTCS: DTCS Code, DTCS Pol
>
> For more details review either of the "columns" guides linked here:
> http://www.miklor.com/COM/UV_CHIRP.php#guides
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 20
> Date: Wed, 4 Jul 2018 09:55:20 -0500
> From: Dennis Wage <dwage at dwage.com>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/60e2f59b/attachment-0002.html 


More information about the chirp_users mailing list