[chirp_users] How to empty or null tone channel in Chirp?

Dennis Wage dwage at dwage.com
Wed Jul 4 07:55:20 PDT 2018


I suggest not hiding the columns so you begin to understand how it all
works.

Just my opinion.
DW

Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net

On Wed, Jul 4, 2018 at 9:34 AM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Jul 4, 2018 at 9:48 AM,  <survivor at cryptolab.net> wrote:
> >
> > When I use Chirp to set radio channels, there are many columns I cannot
> let
> > empty, unless I cannot save it or uploat to radio. Most repeaters here
> have
> > no subtone and I cannot let tone column empty, or null or zero. In chirp,
> > there is a preseted tone list from 67.0 to 254.1. When I power on the
> > transceiver in frequency mode and ajust to repeater channel, I can hear
> > people talking normally. When I power on in channel mode and choose the
> > respective channel with the same frequency, I cannot hear people talking.
> > Pearhaps, tone values are wrong and in most cases they are unnecessary.
> How
> > to I solve this?
> > I have a Baofeng UV-82 WITH 8 Watts (HP).
> > Firmware
> > 3 KEY: N822413
> > 6 KEY: 140902N
> >
> > TKS
> >
> > PU4YOU
>
> Setting Tone Mode to "(None)" is the same has having menu 10 (R-DCS),
> 11 (R-CTCS), 12 (T-DCS) and 13 (T-CTCS) set to OFF. If the Tone,
> ToneSql, DTCS Code, DTCS Rx Code DTCS Pol and Cross Mode columns don't
> show up as blank, then click "View" in the menu bar and enable "Hide
> unused fields" (which is the default on new CHIRP installations). Even
> when this setting is not enabled, the values in these columns are
> ignored.
>
> The values in the columns mentioned above a only recognized when they
> are enabled by the selected Tone Mode. And then only the columns
> required by that mode are paid attention to. For example...
>
> Tone Mode: Columns
> (None):
> Tone: Tone
> TSQL: ToneSql
> DTCS: DTCS Code, DTCS Pol
>
> For more details review either of the "columns" guides linked here:
> http://www.miklor.com/COM/UV_CHIRP.php#guides
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dennis Wage at dwage at dwage.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/098ecfc5/attachment-0002.html 


More information about the chirp_users mailing list