[chirp_users] BF-H8FP programming

[Chance Fulton]

The USB cable will emulate a com port when the driver is properly
installed. You can see what com port is assigned to a given device under
Device Management in Windows.

-KE8EXY

On Thu, Jul 5, 2018 at 12:41 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> Most of these radios require serial (a COM port in Windows) communications
> for programming. Most modern computers do not have a legacy serial port so
> a USB programming cable containing a chip used with a device driver to
> create a virtual COM port.
>
> On Thu, Jul 5, 2018, 11:54 AM Jack Wimberly <wimberly.jack at gmail.com>
> wrote:
>
>> Does anyone have experience programing this radio using the USB cable
>> supplied with it? My biggest problem is that the software is looking for
>> a com port connection. Is there any work around for this? Thanks.
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jim at rock.unroe at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chance at chance.fulton at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



-- 
Chance Fulton
chance.fulton at gmail.com
810.441.5795
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180705/afdf4777/attachment.html