[chirp_users] Chirp began ten years ago today...

BobJ
Wed Jul 4 07:34:22 PDT 2018


As far as I know, after ten years, Chirp is still not accessible by blind hams who must use screen-reading software.  If I am wrong about that, please let me know, otherwise, I'll withhold my praise until Chirp becomes accessible by blind hams.

73   Bob   AD8RJ




From: Chuck Hast 
Sent: Wednesday, July 04, 2018 12:51 AM
To: Discussion of CHIRP 
Subject: Re: [chirp_users] Chirp began ten years ago today...


Dan, 
First a big hat off to you and all on that list for the great work and piece of art.
It is funny, I was working in Kalama WA in a newly opened glass plant, the company that
I worked for had sold them the fore hearths and glass container inspection machines. My
job was to bring those machines on line and then train and shepherd those folks in the
inspections of the bottles. I had tons of overtime so I toddled down to HRO in PDX and
got me a 92AT. That was I think in late Aug 2008 or Sept. I know it had not started raining
yet and the weather was still good. It was one of the folks at HRO that aimed me your
direction I believe it was. I did not know that the project was that new. I do not remember
when I downloaded the first code, but it worked on that 92AT (I still have it). 


By way I now live in Oklahoma, but I sure miss the NW...


Looks like I joined the list on 20 Jun 2009. 


On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <wn3lif at gmail.com> wrote:

  Thanks to All that made Chirp possible! Never knew there were so many.






  Regards,

  WT

  Real heroes do not wear capes. They wear dog tags, turnout gear, and badges!



  On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla at usa.net> wrote:



    Thank you to Team CHIRP.
    An invaluable service to the Amateur Radio community.

    John  ‘Miklor’   K3NXU

    http://www.miklor.com

    http://www.miklor.com/DMR/







    From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Barry K
    Sent: Tuesday, July 3, 2018 2:32 PM


    To: Discussion of CHIRP
    Subject: Re: [chirp_users] Chirp began ten years ago today...



    yes this program has saved a lot of hours

    thanks for it



    Barry aka  N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT, SKYWARN 128A






----------------------------------------------------------------------------

    From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Norman Sebern <nsebern14 at gmail.com>
    Sent: Tuesday, July 3, 2018 10:38 AM
    To: Discussion of CHIRP
    Subject: Re: [chirp_users] Chirp began ten years ago today... 



    Thank YOU. 







    On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz at pcicon.net> wrote:

      Congratulations on reaching your 10 year milestone with such a great piece of software!
      As a fairly new Ham, it's made my life a lot easier.
      Thank you!

      73s
      Frank
      K1HLZ

      On July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith at danplanet.com> wrote: 

Hi all,I just wanted to share a milestone in the CHIRP project with the community. Ten years ago today, on July 3rd 2008, I made the first commit to the repository which started the chirp project:https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fbIt was just a rough bit of code that could talk to an Icom IC-92AD and I was apparently thinking of calling it "repidr". I do not recall what that was supposed to stand for, but by July 16th I had renamed it to CHIRP:https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847bBy July 19th, I was ready to make something available, which was just able to read and write CSV files, and talk to Icom IC-9x radios and the ID-800H. This was the first version 0.1.1:https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7I still remember the large stack of paper on the corner of my desk where I had written out tons of hex, all in pencil, erased and re-written many times, trying to decode the first few radio memories and looking for patterns to make it easier.The project has come a long way since then, largely due to the help and involvement of other volunteers and users. While the first release supported two radio models, the latest one supports 228 distinct models, with more if you count the many clones that exist. The users mailing list has a fairly amazing 2892 people subscribed, from all over the world, representing a tiny fraction of the total user base.So, I just want to thank all the people who have made CHIRP possible and successful. Especially contributors of code, bug reports, and test reports, but also people who have spent hours on this list helping others and being the support system that allows volunteer developers to focus on what they do best. Thanks to anyone who has ever sent a donation, as well as the commercial outfits who have contributed radios and other help. There are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few that come to mind as having a substantial impact.At the end of this email is a very rough list of all the code contributors to the project, extracted from the repository with minimal attempts to squash some duplicates. These are the rock stars that have gotten us to where we are today, so please join me in thanking them for spending their nights and weekends making this project the success that it is today!--DanCommits Contributor-------|--------------------------------------------------------------------------   1865 Dan Smith    240 Jim Unroe    189 Tom Hayward    188 Marco Filippi    137 Zach Welch     59 Jens Jensen     58 Pavel Milanes (CO7WT)     26 K. Arvanitis     15 Tyler Tidman     12 Richard Cochran     10 Dan Drogichen      8 Sean Burford      8 Rick Farina      8 Michael Wagner      8 Eric Allen      8 Brian Dickman      7 SASANO Takayoshi      6 Vernon Mauery      6 Ron Wellsted      6 Rhett Robinson      6 Ray Cielencki      5 Rick DeWitt      5 Keith Williamson      4 Tim Smith      4 Nicolas Pike      4 Mathias Weyland      4 IT2 Stuart Blake Tener, USNR (N3GWG)      4 David Griffith      4 Chris Fosnight      4 Angus Ainslie      4 Alexey K      3 Rick Farina      3 Leo Bärring      3 Jon K Hellan      3 Christopher Hoover      3 Ben Smith      2 Richard Birch      2 Nathan Crapo      2 Michal Demin      2 Louie Ilievski      2 Johan Adler      2 Dean Gibson      2 Cody P Schafer      1 Windsor Schmidt      1 Wade Simmons      1 Stuart Tener      1 Steve Conklin      1 Ryan Tourge K2RRT x      1 Robert Terzi      1 Robert Morris      1 Patrik Nilsson      1 nytowl      1 Nolan Darilek      1 nicolas jon pike      1 Mike Pittaro      1 Michal D      1 Michael Lippold      1 Mark Adams      1 loudawgucr at gmail.com      1 Krystian SP6IT      1 kc1ckh at arrl.net      1 Jeremy McDermond      1 James Lee N1DDK      1 Imuli      1 Eric Dropps      1 Ed Santiago      1 Declan Rieb      1 David Fannin      1 Dave Allan      1 Dale Tyler      1 Charles Stewart      1 Brett Bump      1 Brad Ackerman      1 Attilio Pannella      1 Andrew      1 Adam Coddington      1 ac2lq      1 Aaron Pelly--------------------------------------------------------------------------chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to FRANK G at k1hlz at pcicon.netTo unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
      -- 
      Sent from my Android device with K-9 Mail. Please excuse my brevity.

      _______________________________________________
      chirp_users mailing list
      chirp_users at intrepid.danplanet.com
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users
      This message was sent to Norman Sebern at nsebern14 at gmail.com
      To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


    _______________________________________________
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to WT at wn3lif at gmail.com
    To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to Chuck Hast at kp4djt at gmail.com
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




-- 

Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to rjustice004 at woh.rr.com at rjustice004 at woh.rr.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/427715ef/attachment.html 


More information about the chirp_users mailing list