[chirp_users] How to empty or null tone channel in Chirp?

[Dennis Wage]

Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net

On Wed, Jul 4, 2018 at 9:06 AM, neil b <ne.b at hotmail.co.uk> wrote:

> typical uk repeater
>
> first column
>
> freq - 145.625
> name - gb3nw
> tone mode - tone
> tone - 67
> next few are empty
> duplex is - (minus)
> offset - 0.6
> mode -fm
> power - high
>
>
>
>
> ----- Original Message -----
> *From:* survivor at cryptolab.net
> *To:* chirp_users at intrepid.danplanet.com
> *Sent:* Wednesday, July 04, 2018 2:48 PM
> *Subject:* [chirp_users] How to empty or null tone channel in Chirp?
>
>
> When I use Chirp to set radio channels, there are many columns I cannot
> let empty, unless I cannot save it or uploat to radio. Most repeaters here
> have no subtone and I cannot let tone column empty, or null or zero. In
> chirp, there is a preseted tone list from 67.0 to 254.1. When I power on
> the transceiver in frequency mode and ajust to repeater channel, I can hear
> people talking normally. When I power on in channel mode and choose the
> respective channel with the same frequency, I cannot hear people talking.
> Pearhaps, tone values are wrong and in most cases they are unnecessary. How
> to I solve this?
> I have a Baofeng UV-82 WITH 8 Watts (HP).
> Firmware
> 3 KEY: N822413
> 6 KEY: 140902N
>
> TKS
>
> PU4YOU
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to m1cfk at ne.b at hotmail.co.uk
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dennis Wage at dwage at dwage.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/3d3c8a83/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 27035 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/3d3c8a83/attachment.png