[chirp_users] chirp_users Digest, Vol 109, Issue 6 and many others

John Kemker kemkerj3 at gmail.com
Sat Jan 6 19:14:46 PST 2018


>>The standard in the computer profession for decades has been a backwards
question mark. Did somebody change the standard without proper notification?

Nigel, the backwards question mark is an 8-bit code.  Many mail systems
only support 7-bit encoding.  (See https://tools.ietf.org/html/rfc5322 for
information on allowable characters in Internet Email messages.)

On Sat, Jan 6, 2018 at 6:24 PM, Aubrey Turner <aubrey.c.turner at gmail.com>
wrote:

> Fred,
>
> It looks fine for me.  I looked at the message source for this message and
> there were no smart quotes in it.  Just plain old apostrophes.
>
> --Aubrey
>
> On 01/06/2018 05:19 PM, Fred Dalzell wrote:
>
> Aubrey - thanks for the research. I'm adding some sentences now with
> apostrophes to see if it's fixed as I've disabled the "Smart (dumb) Quotes"
> in System Preferences.
>
> Let's see if it's fixed on my end.
>
> Fred, KI7BCL
>
>
> *From:* Aubrey Turner
> *Sent:* January 6, 2018 at 3:04:18 PM PST
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* Re: [chirp_users] chirp_users Digest, Vol 109, Issue 6 and
> many others
>
> Taking another look at the original email, what I'm seeing is that the
> email sent by Fred appears to be using "smart quotes' on the Mac (or at
> least it's sent from "Mac OS X Mail 10.3" per the headers).
>
> Here's what his email looks like internally (inside the MIME envelope):
>
> Content-Transfer-Encoding: quoted-printable
> Content-Type: text/plain;
> 	charset=utf-8
>
> Tip - it=E2=80=99s not Mac iOS (that=E2=80=99s the OS for the iPhone). =
> It=E2=80=99s MacOS.
>
> FTDI does support Mac OS quite well. The cloning cables I've gotten =
> directly from the manufacturer or Valley Enterprises.
>
> 73=E2=80=99s
>
> Fred
> KI7BCL
>
>
> Note the use of the unicode code point E2 80 99, which is defined as:
> U+2019 ’ e2 80 99 RIGHT SINGLE QUOTATION MARK
> (more here: http://www.utf8-chartable.de/unicode-utf8-
> table.pl?start=8192&number=128)
>
> Chris appears to be using Hotmail (and charset ISO-8859-1) based on the
> headers in his email.
>
> There's an article on Apple.com <http://apple.com/> about this.
> Apparently, disabling smart quotes will fix the issue:
> - https://discussions.apple.com/thread/6322119
>
> FYI--I've seen similar problems when people use Word to compose their
> emails and then copy-and-paste the text to the email client.  Word also
> uses smart quotes (which means it's using the 'e2 80 99' code point instead
> of the old-fashioned regular apostrophe (code point 27)).
>
> Although it seems to me that perhaps if smart quotes are becoming more
> common, that perhaps Hotmail should start supporting them correctly.  As I
> mentioned in a previous email, my Android email client (GMail app) had no
> issues with Fred's original email.  And now that I'm on my PC (Ubuntu 16.04
> LTS with Thunderbird), his email reads just fine (I.e. no extraneous
> question marks).  However, if I look very closely, I can see that the
> apostrophes in his first sentence are visually distinct from the apostrophe
> in his second sentence.  The difference being that the ones in the first
> sentence are smart quotes and the second sentence has the old standard
> apostrophe.  The same is true of the apostrophe in his sign-off '73's'.
> The apostrophe is actually the "RIGHT SINGLE QUOTATION MARK' again, which
> is visually distinct.
>
>
>
> On 01/06/2018 02:14 PM, Christopher F. Beesley wrote:
>
> Hi, Chris here. What's all this utter nonsense that is becoming more and
> more common whereby the question mark is used instead of the apostrophe?
> I'm fed up of seeing stuff that won't read easily because of it, e.g. I?m
> fed up of seeing stuff that won?t read easily because of it. It?s rubbish!
> Where did you lot learn English grammar'
> Chris. N.B. All punctuation errors above are deliberate, designed to
> emphasise the point of this message.
>
>
> ------------------------------
> *From:* chirp_users-bounces at intrepid.danplanet.com <chirp_
> users-bounces at intrepid.danplanet.com>
> <chirp_users-bounces at intrepid.danplanet.com> on behalf of
> chirp_users-request at intrepid.danplanet.com <chirp_users-request at intrepid.
> danplanet.com> <chirp_users-request at intrepid.danplanet.com>
> *Sent:* 06 January 2018 20:00
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* chirp_users Digest, Vol 109, Issue 6
>
> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Fwd: FDTI chip compatibility with Mac (T.E. Klamberg Klamberg)
>    2. Re: Fwd: FDTI chip compatibility with Mac (Fred Dalzell)
>    3. Re: Fwd: FDTI chip compatibility with Mac (Jim McCorison)
>    4. Re: Fwd: FDTI chip compatibility with Mac
>       (Nigel A. Gunn  G8IFF/W8IFF)
>    5. Re: Fwd: FDTI chip compatibility with Mac (Aubrey Turner)
>    6. Re: Fwd: FDTI chip compatibility with Mac (T.E. Klamberg Klamberg)
>    7. Wouxun KG-UV8E KG-UV8T KG-UV8D Plus (D.J.J. Ring, Jr.)
>    8. Linux PPA problem? (Tom Consodine ND5Y)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 5 Jan 2018 17:31:13 -0600
> From: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>
> Subject: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <1A0978D7-3545-46A5-9A60-FAEF20F9553C at yahoo.com>
> <1A0978D7-3545-46A5-9A60-FAEF20F9553C at yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Here is the answer I got from FTDI regarding their cable chipsets!
> Let me ask again: how many of you are Mac iOS users, and where did you get
> your cloning cables from?
> THanks.
> Tip N9MVX
>
> > Begin forwarded message:
> >
> > From: Cameron Forbes <cameron.forbes at ftdichip.com>
> <cameron.forbes at ftdichip.com>
> > Subject: RE: FDTI chip compatibility with Mac
> > Date: January 5, 2018 at 16:41:00 CST
> > To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>, US
> Support <us.support at ftdichip.com> <us.support at ftdichip.com>
> >
> > Tipton:
> >
> > FTDI does not support iOS.
> >
> >
> > Best Regards,
> >
> > Cameron Forbes
> > Customer Support Engineer
> >
> > Future Technology Devices International Limited
> > 7130 SW Fir Loop
> > Tigard, OR 97223-8160
> > Tel:   503.726.5415 <(503)%20726-5415>
> > Fax:  503.547.0987 <(503)%20547-0987>
> >
> >
> > -----Original Message-----
> > From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com <n9mvx at yahoo.com>]
> > Sent: Tuesday, January 02, 2018 8:37 AM
> > To: US Support
> > Subject: FDTI chip compatibility with Mac
> >
> > My question has to do with the FTDI chipset and Apple computers. I have
> a MacBook Pro with iOS High Sierra version 10.13.2 installed.
> > Is your chipset compatible with that iOS?
> > Thank you.
> >
> > Tipton Klamberg
> > Mascoutah, Il 62258
> > (618) 670-1502
> > [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=
> EmailfooterApril17>
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> > Registered in Scotland No 136640
> > This message contains confidential information and is intended only for
> the individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/ec8fbd8e/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Fri, 05 Jan 2018 15:37:23 -0800
> From: Fred Dalzell <dalzellf at mac.com> <dalzellf at mac.com>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>,
> Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID: <1553EFDF-5CEB-4DCF-812D-49B9C1DB5CCB at mac.com>
> <1553EFDF-5CEB-4DCF-812D-49B9C1DB5CCB at mac.com>
> Content-Type: text/plain; charset="utf-8"
>
> Tip - it?s not Mac iOS (that?s the OS for the iPhone). It?s MacOS.
>
> FTDI does support Mac OS quite well. The cloning cables I've gotten
> directly from the manufacturer or Valley Enterprises.
>
> 73?s
>
> Fred
> KI7BCL
>
>
>
> > From: T.E. Klamberg Klamberg via chirp_users
> > Sent: January 5, 2018 at 3:31:13 PM PST
> > To: chirp_users at intrepid.danplanet.com
> > Subject: [chirp_users] Fwd: FDTI chip compatibility with Mac
> >
> > Here is the answer I got from FTDI regarding their cable chipsets!
> > Let me ask again: how many of you are Mac iOS users, and where did you
> get your cloning cables from?
> > THanks.
> > Tip N9MVX
> >
> >> Begin forwarded message:
> >>
> >> From: Cameron Forbes <cameron.forbes at ftdichip.com <
> mailto:cameron.forbes at ftdichip.com <cameron.forbes at ftdichip.com>>>
> >> Subject: RE: FDTI chip compatibility with Mac
> >> Date: January 5, 2018 at 16:41:00 CST
> >> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com <mailto:n9mvx at yahoo.com
> <n9mvx at yahoo.com>>>, US Support <us.support at ftdichip.com <mail
> to:us.support at ftdichip.com <us.support at ftdichip.com>>>
> >>
> >> Tipton:
> >>
> >> FTDI does not support iOS.
> >>
> >>
> >> Best Regards,
> >>
> >> Cameron Forbes
> >> Customer Support Engineer
> >>
> >> Future Technology Devices International Limited
> >> 7130 SW Fir Loop
> >> Tigard, OR 97223-8160
> >> Tel:   503.726.5415 <(503)%20726-5415>
> >> Fax:  503.547.0987 <(503)%20547-0987>
> >>
> >>
> >> -----Original Message-----
> >> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com <n9mvx at yahoo.com>
> <mailto:n9mvx at yahoo.com <n9mvx at yahoo.com>>]
> >> Sent: Tuesday, January 02, 2018 8:37 AM
> >> To: US Support
> >> Subject: FDTI chip compatibility with Mac
> >>
> >> My question has to do with the FTDI chipset and Apple computers. I have
> a MacBook Pro with iOS High Sierra version 10.13.2 installed.
> >> Is your chipset compatible with that iOS?
> >> Thank you.
> >>
> >> Tipton Klamberg
> >> Mascoutah, Il 62258
> >> (618) 670-1502
> >> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17 <http://www.ftdichip.com/FT-
> X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17>>
> >> Registered in Scotland No 136640
> >> This message contains confidential information and is intended only for
> the individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Fred Dalzell at dalzellf at mac.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/f695c3ca/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Fri, 5 Jan 2018 15:40:09 -0800
> From: Jim McCorison <jimmcc at mccorison.com> <jimmcc at mccorison.com>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>,
> Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID: <195DAE54-698B-4670-BFFD-7FF5D58D97A6 at mccorison.com>
> <195DAE54-698B-4670-BFFD-7FF5D58D97A6 at mccorison.com>
> Content-Type: text/plain; charset="utf-8"
>
> Are you asking about iOS, the operating systems on devices like iPhones
> and iPads; or about MacOS, the operating system on MacBook laptops and iMac
> desktops? You specifically stated a version of High Seria which makes me
> think you are actually asking about MacOS, especially since Chirp doesn?t
> run on iOS. Both FTDI and clone cables are supported on MacOS as well as
> it?s predecessor Mac OS X.
>
> Cheers,
> Jim
> K2SON
>
>
> Jim McCorison
> Orcas Island, WA
>
> > On Jan 5, 2018, at 3:31 PM, T.E. Klamberg Klamberg via chirp_users
> <chirp_users at intrepid.danplanet.com> <chirp_users at intrepid.danplanet.com>
> wrote:
> >
> > Here is the answer I got from FTDI regarding their cable chipsets!
> > Let me ask again: how many of you are Mac iOS users, and where did you
> get your cloning cables from?
> > THanks.
> > Tip N9MVX
> >
> >> Begin forwarded message:
> >>
> >> From: Cameron Forbes <cameron.forbes at ftdichip.com>
> <cameron.forbes at ftdichip.com>
> >> Subject: RE: FDTI chip compatibility with Mac
> >> Date: January 5, 2018 at 16:41:00 CST
> >> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>, US
> Support <us.support at ftdichip.com> <us.support at ftdichip.com>
> >>
> >> Tipton:
> >>
> >> FTDI does not support iOS.
> >>
> >>
> >> Best Regards,
> >>
> >> Cameron Forbes
> >> Customer Support Engineer
> >>
> >> Future Technology Devices International Limited
> >> 7130 SW Fir Loop
> >> Tigard, OR 97223-8160
> >> Tel:   503.726.5415 <(503)%20726-5415>
> >> Fax:  503.547.0987 <(503)%20547-0987>
> >>
> >>
> >> -----Original Message-----
> >> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com <n9mvx at yahoo.com>]
> >> Sent: Tuesday, January 02, 2018 8:37 AM
> >> To: US Support
> >> Subject: FDTI chip compatibility with Mac
> >>
> >> My question has to do with the FTDI chipset and Apple computers. I have
> a MacBook Pro with iOS High Sierra version 10.13.2 installed.
> >> Is your chipset compatible with that iOS?
> >> Thank you.
> >>
> >> Tipton Klamberg
> >> Mascoutah, Il 62258
> >> (618) 670-1502
> >> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=
> EmailfooterApril17>
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> >> Registered in Scotland No 136640
> >> This message contains confidential information and is intended only for
> the individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to K2SON at jimmcc at mccorison.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/55852981/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Fri, 5 Jan 2018 18:45:02 -0500 (EST)
> From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel at ngunn.net> <nigel at ngunn.net>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>,
> Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID: <1466364904.603265.1515195902970 at email.1and1.com>
> <1466364904.603265.1515195902970 at email.1and1.com>
> Content-Type: text/plain; charset="utf-8"
>
> "FTDI doesn't support iOS" isn't the same thing as " iOS doesn't support
> FTDI"
>
> Just buy a cable for your radio, perhaps from your radio manufacturer's
> web site, and try it. Report back on your findings.
>
>
> >     On 05 January 2018 at 18:31 "T.E. Klamberg Klamberg via chirp_users"
>  <chirp_users at intrepid.danplanet.com> <chirp_users at intrepid.danplanet.com>
>  wrote:
> >
> >     Here is the answer I got from FTDI regarding their cable chipsets!
> >     Let me ask again: how many of you are Mac iOS users, and where did
> you get your cloning cables from?
> >     THanks.
> >     Tip N9MVX
> >
> >
> >         > >         Begin forwarded message:
> > >
> > >         From: Cameron Forbes <cameron.forbes at ftdichip.com m
> ailto:cameron.forbes at ftdichip.com <cameron.forbes at ftdichip.com> >
> > >         Subject: RE: FDTI chip compatibility with Mac
> > >         Date: January 5, 2018 at 16:41:00 CST
> > >         To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com mailto:n9mvx@
> yahoo.com <n9mvx at yahoo.com> >, US Support <us.support at ftdichip.com mailt
> o:us.support at ftdichip.com <us.support at ftdichip.com>>
> > >
> > >         Tipton:
> > >
> > >         FTDI does not support iOS.
> > >
> > >
> > >         Best Regards,
> > >
> > >         Cameron Forbes
> > >         Customer Support Engineer
> > >
> > >         Future Technology Devices International Limited
> > >         7130 SW Fir Loop
> > >         Tigard, OR 97223-8160
> > >         Tel:   503.726.5415 <(503)%20726-5415>
> > >         Fax:  503.547.0987 <(503)%20547-0987>
> > >
> > >
> > >         -----Original Message-----
> > >         From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com
> <n9mvx at yahoo.com>]
> > >         Sent: Tuesday, January 02, 2018 8:37 AM
> > >         To: US Support
> > >         Subject: FDTI chip compatibility with Mac
> > >
> > >         My question has to do with the FTDI chipset and Apple
> computers. I have a MacBook Pro with iOS High Sierra version 10.13.2
> installed.
> > >         Is your chipset compatible with that iOS?
> > >         Thank you.
> > >
> > >         Tipton Klamberg
> > >         Mascoutah, Il 62258
> > >         (618) 670-1502
> > >         [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17 http://www.ftdichip.com/FT-X.
> htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
>  >
> > >         Registered in Scotland No 136640
> > >         This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee you
> should not disseminate, distribute or copy this e-mail. Please notify the
> sender immediately by e-mail if you have received this e-mail by mistake
> and delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
> > >
> > >     >
> >
>
>
>
>
> > _______________________________________________
> >     chirp_users mailing list
> >     chirp_users at intrepid.danplanet.com
> >     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> >     To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> >
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1
> 937 825 5032 <(937)%20825-5032>
> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel at ngunn.net www
> http://www.ngunn.net
> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> International #385,
> Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/4bb61c0d/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Fri, 5 Jan 2018 17:46:11 -0600
> From: Aubrey Turner <aubrey.c.turner at gmail.com>
> <aubrey.c.turner at gmail.com>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>,
> Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADBLnP4jVpwuVJfZPsjdVrEBtzf1DNhXyhqA0MYf6R=nj+x6CA at mail.
> gmail.com>
> <CADBLnP4jVpwuVJfZPsjdVrEBtzf1DNhXyhqA0MYf6R=nj+x6CA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Unfortunately, he answered the wrong question. Mac uses macOS (formerly
> known as OS X), not iOS. IOS is for the iPhone and iPad.
>
> Here's the page that has the driver from FTDI:
> http://www.ftdichip.com/Drivers/VCP.htm
>
>
>
>
> On Jan 5, 2018 5:31 PM, "T.E. Klamberg Klamberg via chirp_users" <
> chirp_users at intrepid.danplanet.com> wrote:
>
> Here is the answer I got from FTDI regarding their cable chipsets!
> Let me ask again: how many of you are Mac iOS users, and where did you get
> your cloning cables from?
> THanks.
> Tip N9MVX
>
> Begin forwarded message:
>
> *From: *Cameron Forbes <cameron.forbes at ftdichip.com>
> <cameron.forbes at ftdichip.com>
> *Subject: **RE: FDTI chip compatibility with Mac*
> *Date: *January 5, 2018 at 16:41:00 CST
> *To: *"T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>, US
> Support <
> us.support at ftdichip.com>
>
> Tipton:
>
> FTDI does not support iOS.
>
>
> Best Regards,
>
> Cameron Forbes
> Customer Support Engineer
>
> Future Technology Devices International Limited
> 7130 SW Fir Loop
> Tigard, OR 97223-8160
> Tel:   503.726.5415 <(503)%20726-5415> <(503)%20726-5415>
> Fax:  503.547.0987 <(503)%20547-0987> <(503)%20547-0987>
>
>
> -----Original Message-----
> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com <n9mvx at yahoo.com> <
> n9mvx at yahoo.com> <n9mvx at yahoo.com>]
> Sent: Tuesday, January 02, 2018 8:37 AM
> To: US Support
> Subject: FDTI chip compatibility with Mac
>
> My question has to do with the FTDI chipset and Apple computers. I have a
> MacBook Pro with iOS High Sierra version 10.13.2 installed.
> Is your chipset compatible with that iOS?
> Thank you.
>
> Tipton Klamberg
> Mascoutah, Il 62258
> (618) 670-1502
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17>
> Registered in Scotland No 136640
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/c2d2b7a3/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Sat, 6 Jan 2018 03:09:07 +0000 (UTC)
> From: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: Aubrey Turner <aubrey.c.turner at gmail.com> <aubrey.c.turner at gmail.com>,
> Discussion of CHIRP
>         <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID: <698213000.1355860.1515208147367 at mail.yahoo.com>
> <698213000.1355860.1515208147367 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> I see clearly where the mistake was made...by me. I?m the one that used
> ?iOS? instead of just ?Mac OS?. I learned something today. So I will order
> the cables I need for my two Yaesus, download CHIRP to my MacBook Pro and
> go on from there. Thanks to all for your assistance.
> Tip, N9MVX
>
>
> Sent from Yahoo Mail for iPhone
>
>
> On Friday, January 5, 2018, 17:46, Aubrey Turner <aubrey.c.turner at gmail.
> com> <aubrey.c.turner at gmail.com> wrote:
>
> Unfortunately, he answered the wrong question. Mac uses macOS (formerly
> known as OS X), not iOS. IOS is for the iPhone and iPad.?
> Here's the page that has the driver from FTDI:http://www.ftdichip.com/
> Drivers/VCP.htm
>
>
>
>
> On Jan 5, 2018 5:31 PM, "T.E. Klamberg Klamberg via chirp_users"
> <chirp_users at intrepid.danplanet.com> <chirp_users at intrepid.danplanet.com>
> wrote:
>
> Here is the answer I got from FTDI regarding their cable chipsets!Let me
> ask again: how many of you are Mac iOS users, and where did you get your
> cloning cables from?THanks.Tip N9MVX
>
>
> Begin forwarded message:
> From: Cameron Forbes <cameron.forbes at ftdichip.com>
> <cameron.forbes at ftdichip.com>
> Subject: RE: FDTI chip compatibility with Mac
> Date: January 5, 2018 at 16:41:00 CST
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com> <n9mvx at yahoo.com>, US
> Support <us.support at ftdichip.com> <us.support at ftdichip.com>
>
> Tipton:
>
> FTDI does not support iOS.
>
>
> Best Regards,
>
> Cameron Forbes
> Customer Support Engineer
>
> Future Technology Devices International Limited
> 7130 SW Fir Loop
> Tigard, OR 97223-8160
> Tel: ??503.726.5415 <(503)%20726-5415>
> Fax: ?503.547.0987 <(503)%20547-0987>
>
>
> -----Original Message-----
> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com <n9mvx at yahoo.com>]
> Sent: Tuesday, January 02, 2018 8:37 AM
> To: US Support
> Subject: FDTI chip compatibility with Mac
>
> My question has to do with the FTDI chipset and Apple computers. I have a
> MacBook Pro with iOS High Sierra version 10.13.2 installed.
> Is your chipset compatible with that iOS?
> Thank you.
>
> Tipton Klamberg
> Mascoutah, Il 62258
> (618) 670-1502
> [FT-X]<http://www.ftdichip. com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium= EmailfooterApril17&utm_
> campaign=EmailfooterApril17& utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17 >
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> Registered in Scotland No 136640
> This message contains confidential information and is intended only for
> the individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future Technology
> Devices International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses. However, we
> cannot accept liability for any damage sustained as a result of software
> viruses and would advise that you carry out your own virus checks before
> opening any attachment.
>
>
>
> ______________________________ _________________
> chirp_users mailing list
> chirp_users at intrepid. danplanet.com
> http://intrepid.danplanet.com/ mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@ intre
> pid.danplanet.com
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180106/68bdc349/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Fri, 5 Jan 2018 23:01:37 -0500
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net> <n1ea at arrl.net>
> Subject: [chirp_users] Wouxun KG-UV8E KG-UV8T KG-UV8D Plus
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADO5Rbj+uo=diLj5h8zhXaPm+tFQYBqNL_uGM5B-
> P-usRU37ww at mail.gmail.com>
> <CADO5Rbj+uo=diLj5h8zhXaPm+tFQYBqNL_uGM5B-P-usRU37ww at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> To all who have been following the work on Wouxun KG-UV8E issue #3943.
>
> I uploaded a debug log and I wasn't expecting my username and password to
> be in plain text, so the entire issue had to be deleted.  (Thanks Dan)
>
> The project is moved:
> Wouxun KG-UV8E KG-UV8T KG-UV8D Plus
> <https://chirp.danplanet.com/issues/5481>
>
> https://chirp.danplanet.com/issues/5481
>
> 73
> David N1EA
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_
> users/attachments/20180105/d198ec37/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Sat, 6 Jan 2018 12:46:46 -0600
> From: Tom Consodine ND5Y <nd5y at yahoo.com> <nd5y at yahoo.com>
> Subject: [chirp_users] Linux PPA problem?
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <3aec84c7-5b3e-19fe-cedf-8620a0036639 at yahoo.com>
> <3aec84c7-5b3e-19fe-cedf-8620a0036639 at yahoo.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I'm using Ubuntu linux here and a couple days ago I got the new daily
> build available e-mail notice but I never got the new version when I did
> a system upgrade.
>
> Today I looked at the Chirp Launchpad PPA page and it shows the latest
> chirp-daily is 20180104 but then it says "5 packages waiting to build".
>
> Is the PPA broken or something?
>
> --
> Tom ND5Y
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 109, Issue 6
> *******************************************
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Fred Dalzell at dalzellf at mac.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
>
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to W5NNH at kemkerj3 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



-- 
--John E Kemker III
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180106/dc37cbba/attachment-0002.html 


More information about the chirp_users mailing list