[chirp_users] TYT DMR Radios

David Ranch chirp at trinnet.net
Mon Jan 1 17:48:01 PST 2018


Per http://www.linux-usb.org/usb.ids , this seems like 0483:df11 is:

    0483  STMicroelectronics
       df11  STM Device in DFU Mode


That's NOT a serial port.

--David
KI6ZHD


On 01/01/2018 04:59 PM, Chuck Hast wrote:
> The TYT dongle is not a serial device, here is the syslog dump I get 
> when I
> plug the TYT dongle with radio connected.
>
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.369938] usb 1-1.1: new 
> full-speed USB device number 9 using ehci-pci
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469746] usb 1-1.1: New USB 
> device found, idVendor=0483, idProduct=df11
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469756] usb 1-1.1: New USB 
> device strings: Mfr=1, Product=2, SerialNumber=3
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469762] usb 1-1.1: Product: 
> Patched MD380
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469767] usb 1-1.1: 
> Manufacturer: @00000008 : ffffffff
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469771] usb 1-1.1: 
> SerialNumber: 00000000010C
> Jan  1 18:55:42 kp4djt-t420 mtp-probe: checking bus 1, device 9: 
> "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
> Jan  1 18:55:42 kp4djt-t420 mtp-probe: bus: 1, device: 9 was not an 
> MTP device
>
> The DMRTOOLS talk to it just fine, now to figure out how to get it to 
> talk to the
> radio from wine. Also the device does not appear in /dev unlike serial 
> devices.
>
>
>
> On Mon, Jan 1, 2018 at 1:08 PM, Nigel Johnson <nw.johnson at ieee.org 
> <mailto:nw.johnson at ieee.org>> wrote:
>
>     If you are having trouble getting USB serial working in wine under
>     linux, try this post:
>
>     https://www.downtowndougbrown.com/2013/03/getting-x-ctu-in-wine-to-detect-your-serial-ports/
>     <https://www.downtowndougbrown.com/2013/03/getting-x-ctu-in-wine-to-detect-your-serial-ports/>
>
>     I do a lot of micro controller programming and debugging using
>     serial interfaces and I have used it to get several different
>     things working
>
>     73 de NIgel ve3id
>
>
>
>     On 01/01/18 13:39, Chuck Hast wrote:
>>     Yes, we all use DMRTools on the MD-380 and similar, but still
>>     have to fall back
>>     on the stinking TYT software to actually generate the code plug,
>>     sure would
>>     like to be able to use one piece of software to do it. The TYT
>>     software runs
>>     under wine but it cannot see the dongle as wine does not appear
>>     to be able
>>     to handle USB devices so you have to make it a two step process
>>     as far as I
>>     can see.
>>
>>     Yes we will need to find someone who can take on the Chirp work,
>>     as it is more
>>     than just a bit trivial to add the DMR stuff, but maybe someone
>>     will emerge.
>>     There are a lot of MD-380 people out there who would like to be
>>     able to use
>>     Chirp for the radio maybe one is a coder and will step forward.
>>
>>
>>
>>     On Mon, Jan 1, 2018 at 11:57 AM, Silverfox <alan.r.hill at gmail.com
>>     <mailto:alan.r.hill at gmail.com>> wrote:
>>
>>         Why do you need it. There is already excellent freeware
>>         software that
>>         allows you to program them.
>>         Happy New Year.  73's
>>         Alan - W6ARH
>>
>>
>>
>>         -----Original Message-----
>>         From: chirp_users-bounces at intrepid.danplanet.com
>>         <mailto:chirp_users-bounces at intrepid.danplanet.com>
>>         [mailto:chirp_users-bounces at intrepid.danplanet.com
>>         <mailto:chirp_users-bounces at intrepid.danplanet.com>] On
>>         Behalf Of Neil Stone
>>         Sent: Monday, January 1, 2018 2:00 AM
>>         To: chirp_users at intrepid.danplanet.com
>>         <mailto:chirp_users at intrepid.danplanet.com>
>>         Subject: [chirp_users] TYT DMR Radios
>>
>>         Good morning and happy new year all,
>>
>>         I was wondering if there were any plans to add functionality
>>         to chirp to
>>         support the TYT DMR radios, such as their MD-2017 (...so last
>>         year) or
>>         MD-380 for example?
>>
>>         That's all for now, 73
>>
>>         Neil (M6LPI)
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180101/81c137db/attachment-0002.html 


More information about the chirp_users mailing list