[chirp_users] Baofeng UV 82X

[Jim Unroe]

On Wed, Jan 17, 2018 at 5:34 PM, Dave <n7am46 at gmail.com> wrote:
> I used factory software to configure as a 2/220 radio it was showing
> 2/440. I can not save the programing in the factory software or upload
> the file from the radio it uploads a little and then gives a connection
> error. Factory will download to radio but once I close the program I get
> to start over again. Chirp will let me upload the file but, errors out
> the 220 repeaters but not the 220 simplex frequencies. If I edit and
> reenter the repeaters I can download the file to the radio and it works
> but I just opened the saved file on my computer and it has error'd out
> the repeaters again. Also as I enter frequencies in the radio, 2 meters
> shows an offset of .600 but by the time I add the offset that has
> changed to 0.00 same on 220 the offset changes to 0.0 even though I have
> entered a + or - offset. At least the radio is programmed so, thanks for
> the help.
>
> Dave
>
> N7AM

Dave,

Like I mentioned previously, email your CHIRP Radio Images (*.img)
file to me and I will "fix" it so CHIRP will detect it and your radio
as a VHF/220 radio. It won't take but a few seconds.

Jim KC9HI