[chirp_users] UV-50x2 / CHIRP Questions

[Darby Collier]

My UV50X2 has the data cable input on the front, it is actually stamped
"Data". Also note it likely will show up on a different source than your
handheld, even in the same USB port.

On Jan 11, 2018 16:20, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Thu, Jan 11, 2018 at 6:48 PM, Charley Bratton <charley at bratton.net>
> wrote:
> > Front jack is the programming connection.   Rear jack is audio.
> > Make sure the Tip-Ring-Ring-Sleeve plug is FIRMLY seated.
> >
> > /CB
> >
> > On Jan 11, 2018, at 6:34 PM, sreeb <sreeb at beers.nu> wrote:
> >
> > I can't help yet, but maybe you can help me.  I'm still trying to get
> mine
> > to communicate with chirp at all.
> >
> > Are you plugged into the front or rear jack?
>
> There is not data jack on the front of a UV-50X2. Both the speaker and
> data jacks are side-by-side on the rear of the radio. Be sure you have
> your programming cable plugged into the correct jack.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to DarbyInGreen at collier.darby at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180111/140dbe01/attachment.html