[chirp_users] chirp_users Digest, Vol 109, Issue 6 and many others
Nigel Johnson
Sat Jan 6 15:03:52 PST 2018
The standard in the computer profession for decades has been a backwards
question mark. Did somebody change the standard without proper notification?
On 06/01/18 17:56, John Kemker wrote:
> As far as the question mark in place of apostrophe goes, I believe it
> is an artifact of poor translation from Unicode to ASCII/UTF8. It's
> not deliberate misuse of punctuation, but how some Mail Transport
> Agent (MTA) or MUA (Mail User Agent) handles unknown characters. The
> originating user is probably typing what they think is an apostrophe,
> but it's garbled somewhere along the way.
>
> On Sat, Jan 6, 2018 at 3:14 PM, Christopher F. Beesley
> <chrisbees2 at hotmail.com <mailto:chrisbees2 at hotmail.com>> wrote:
>
> Hi, Chris here. What's all this utter nonsense that is becoming
> more and more common whereby the question mark is used instead of
> the apostrophe? I'm fed up of seeing stuff that won't read easily
> because of it, e.g. I?m fed up of seeing stuff that won?t read
> easily because of it. It?s rubbish! Where did you lot learn
> English grammar'
>
> Chris. N.B. All punctuation errors above are deliberate, designed
> to emphasise the point of this message.
>
>
>
> ------------------------------------------------------------------------
> *From:* chirp_users-bounces at intrepid.danplanet.com
> <mailto:chirp_users-bounces at intrepid.danplanet.com>
> <chirp_users-bounces at intrepid.danplanet.com
> <mailto:chirp_users-bounces at intrepid.danplanet.com>> on behalf of
> chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>
> <chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>>
> *Sent:* 06 January 2018 20:00
> *To:* chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> *Subject:* chirp_users Digest, Vol 109, Issue 6
>
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
> <mailto:chirp_users-owner at intrepid.danplanet.com>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Fwd: FDTI chip compatibility with Mac (T.E. Klamberg Klamberg)
> 2. Re: Fwd: FDTI chip compatibility with Mac (Fred Dalzell)
> 3. Re: Fwd: FDTI chip compatibility with Mac (Jim McCorison)
> 4. Re: Fwd: FDTI chip compatibility with Mac
> (Nigel A. Gunn G8IFF/W8IFF)
> 5. Re: Fwd: FDTI chip compatibility with Mac (Aubrey Turner)
> 6. Re: Fwd: FDTI chip compatibility with Mac (T.E. Klamberg
> Klamberg)
> 7. Wouxun KG-UV8E KG-UV8T KG-UV8D Plus (D.J.J. Ring, Jr.)
> 8. Linux PPA problem? (Tom Consodine ND5Y)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 5 Jan 2018 17:31:13 -0600
> From: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>
> Subject: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> Message-ID: <1A0978D7-3545-46A5-9A60-FAEF20F9553C at yahoo.com
> <mailto:1A0978D7-3545-46A5-9A60-FAEF20F9553C at yahoo.com>>
> Content-Type: text/plain; charset="us-ascii"
>
> Here is the answer I got from FTDI regarding their cable chipsets!
> Let me ask again: how many of you are Mac iOS users, and where did
> you get your cloning cables from?
> THanks.
> Tip N9MVX
>
> > Begin forwarded message:
> >
> > From: Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>>
> > Subject: RE: FDTI chip compatibility with Mac
> > Date: January 5, 2018 at 16:41:00 CST
> > To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, US Support <us.support at ftdichip.com
> <mailto:us.support at ftdichip.com>>
> >
> > Tipton:
> >
> > FTDI does not support iOS.
> >
> >
> > Best Regards,
> >
> > Cameron Forbes
> > Customer Support Engineer
> >
> > Future Technology Devices International Limited
> > 7130 SW Fir Loop
> > Tigard, OR 97223-8160
> > Tel: 503.726.5415 <tel:%28503%29%20726-5415>
> > Fax: 503.547.0987 <tel:%28503%29%20547-0987>
> >
> >
> > -----Original Message-----
> > From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com]
> > Sent: Tuesday, January 02, 2018 8:37 AM
> > To: US Support
> > Subject: FDTI chip compatibility with Mac
> >
> > My question has to do with the FTDI chipset and Apple computers.
> I have a MacBook Pro with iOS High Sierra version 10.13.2 installed.
> > Is your chipset compatible with that iOS?
> > Thank you.
> >
> > Tipton Klamberg
> > Mascoutah, Il 62258
> > (618) 670-1502 <tel:%28618%29%20670-1502>
> >
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>>
> > Registered in Scotland No 136640
> > This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee
> you should not disseminate, distribute or copy this e-mail. Please
> notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system. E-mail
> transmission cannot be guaranteed to be secure or error-free as
> information could be intercepted, lost, destroyed, arrive late or
> incomplete. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message, which arise
> as a result of e-mail transmission. Future Technology Devices
> International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses.
> However, we cannot accept liability for any damage sustained as a
> result of software viruses and would advise that you carry out
> your own virus checks before opening any attachment.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/ec8fbd8e/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/ec8fbd8e/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 05 Jan 2018 15:37:23 -0800
> From: Fred Dalzell <dalzellf at mac.com <mailto:dalzellf at mac.com>>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID: <1553EFDF-5CEB-4DCF-812D-49B9C1DB5CCB at mac.com
> <mailto:1553EFDF-5CEB-4DCF-812D-49B9C1DB5CCB at mac.com>>
> Content-Type: text/plain; charset="utf-8"
>
> Tip - it?s not Mac iOS (that?s the OS for the iPhone). It?s MacOS.
>
> FTDI does support Mac OS quite well. The cloning cables I've
> gotten directly from the manufacturer or Valley Enterprises.
>
> 73?s
>
> Fred
> KI7BCL
>
>
>
> > From: T.E. Klamberg Klamberg via chirp_users
> > Sent: January 5, 2018 at 3:31:13 PM PST
> > To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > Subject: [chirp_users] Fwd: FDTI chip compatibility with Mac
> >
> > Here is the answer I got from FTDI regarding their cable chipsets!
> > Let me ask again: how many of you are Mac iOS users, and where
> did you get your cloning cables from?
> > THanks.
> > Tip N9MVX
> >
> >> Begin forwarded message:
> >>
> >> From: Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>
> <mailto:cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>>>
> >> Subject: RE: FDTI chip compatibility with Mac
> >> Date: January 5, 2018 at 16:41:00 CST
> >> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com> <mailto:n9mvx at yahoo.com>>, US Support
> <us.support at ftdichip.com <mailto:us.support at ftdichip.com>
> <mailto:us.support at ftdichip.com <mailto:us.support at ftdichip.com>>>
> >>
> >> Tipton:
> >>
> >> FTDI does not support iOS.
> >>
> >>
> >> Best Regards,
> >>
> >> Cameron Forbes
> >> Customer Support Engineer
> >>
> >> Future Technology Devices International Limited
> >> 7130 SW Fir Loop
> >> Tigard, OR 97223-8160
> >> Tel: 503.726.5415 <tel:%28503%29%20726-5415>
> >> Fax: 503.547.0987 <tel:%28503%29%20547-0987>
> >>
> >>
> >> -----Original Message-----
> >> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com> <mailto:n9mvx at yahoo.com>]
> >> Sent: Tuesday, January 02, 2018 8:37 AM
> >> To: US Support
> >> Subject: FDTI chip compatibility with Mac
> >>
> >> My question has to do with the FTDI chipset and Apple
> computers. I have a MacBook Pro with iOS High Sierra version
> 10.13.2 installed.
> >> Is your chipset compatible with that iOS?
> >> Thank you.
> >>
> >> Tipton Klamberg
> >> Mascoutah, Il 62258
> >> (618) 670-1502 <tel:%28618%29%20670-1502>
> >>
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>>>
> >> Registered in Scotland No 136640
> >> This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee
> you should not disseminate, distribute or copy this e-mail. Please
> notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system. E-mail
> transmission cannot be guaranteed to be secure or error-free as
> information could be intercepted, lost, destroyed, arrive late or
> incomplete. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message, which arise
> as a result of e-mail transmission. Future Technology Devices
> International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses.
> However, we cannot accept liability for any damage sustained as a
> result of software viruses and would advise that you carry out
> your own virus checks before opening any attachment.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to Fred Dalzell at dalzellf at mac.com
> <mailto:dalzellf at mac.com>
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/f695c3ca/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/f695c3ca/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 5 Jan 2018 15:40:09 -0800
> From: Jim McCorison <jimmcc at mccorison.com
> <mailto:jimmcc at mccorison.com>>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID: <195DAE54-698B-4670-BFFD-7FF5D58D97A6 at mccorison.com
> <mailto:195DAE54-698B-4670-BFFD-7FF5D58D97A6 at mccorison.com>>
> Content-Type: text/plain; charset="utf-8"
>
> Are you asking about iOS, the operating systems on devices like
> iPhones and iPads; or about MacOS, the operating system on MacBook
> laptops and iMac desktops? You specifically stated a version of
> High Seria which makes me think you are actually asking about
> MacOS, especially since Chirp doesn?t run on iOS. Both FTDI and
> clone cables are supported on MacOS as well as it?s predecessor
> Mac OS X.
>
> Cheers,
> Jim
> K2SON
>
>
> Jim McCorison
> Orcas Island, WA
>
> > On Jan 5, 2018, at 3:31 PM, T.E. Klamberg Klamberg via
> chirp_users <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>> wrote:
> >
> > Here is the answer I got from FTDI regarding their cable chipsets!
> > Let me ask again: how many of you are Mac iOS users, and where
> did you get your cloning cables from?
> > THanks.
> > Tip N9MVX
> >
> >> Begin forwarded message:
> >>
> >> From: Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>>
> >> Subject: RE: FDTI chip compatibility with Mac
> >> Date: January 5, 2018 at 16:41:00 CST
> >> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, US Support <us.support at ftdichip.com
> <mailto:us.support at ftdichip.com>>
> >>
> >> Tipton:
> >>
> >> FTDI does not support iOS.
> >>
> >>
> >> Best Regards,
> >>
> >> Cameron Forbes
> >> Customer Support Engineer
> >>
> >> Future Technology Devices International Limited
> >> 7130 SW Fir Loop
> >> Tigard, OR 97223-8160
> >> Tel: 503.726.5415 <tel:%28503%29%20726-5415>
> >> Fax: 503.547.0987 <tel:%28503%29%20547-0987>
> >>
> >>
> >> -----Original Message-----
> >> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com]
> >> Sent: Tuesday, January 02, 2018 8:37 AM
> >> To: US Support
> >> Subject: FDTI chip compatibility with Mac
> >>
> >> My question has to do with the FTDI chipset and Apple
> computers. I have a MacBook Pro with iOS High Sierra version
> 10.13.2 installed.
> >> Is your chipset compatible with that iOS?
> >> Thank you.
> >>
> >> Tipton Klamberg
> >> Mascoutah, Il 62258
> >> (618) 670-1502 <tel:%28618%29%20670-1502>
> >>
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>>
> >> Registered in Scotland No 136640
> >> This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee
> you should not disseminate, distribute or copy this e-mail. Please
> notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system. E-mail
> transmission cannot be guaranteed to be secure or error-free as
> information could be intercepted, lost, destroyed, arrive late or
> incomplete. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message, which arise
> as a result of e-mail transmission. Future Technology Devices
> International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses.
> However, we cannot accept liability for any damage sustained as a
> result of software viruses and would advise that you carry out
> your own virus checks before opening any attachment.
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to K2SON at jimmcc at mccorison.com
> <mailto:jimmcc at mccorison.com>
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/55852981/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/55852981/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 5 Jan 2018 18:45:02 -0500 (EST)
> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net
> <mailto:nigel at ngunn.net>>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID: <1466364904.603265.1515195902970 at email.1and1.com
> <mailto:1466364904.603265.1515195902970 at email.1and1.com>>
> Content-Type: text/plain; charset="utf-8"
>
> "FTDI doesn't support iOS" isn't the same thing as " iOS doesn't
> support FTDI"
>
> Just buy a cable for your radio, perhaps from your radio
> manufacturer's web site, and try it. Report back on your findings.
>
>
> > On 05 January 2018 at 18:31 "T.E. Klamberg Klamberg via
> chirp_users" <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>> wrote:
> >
> > Here is the answer I got from FTDI regarding their cable
> chipsets!
> > Let me ask again: how many of you are Mac iOS users, and
> where did you get your cloning cables from?
> > THanks.
> > Tip N9MVX
> >
> >
> > > > Begin forwarded message:
> > >
> > > From: Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>
> mailto:cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com> >
> > > Subject: RE: FDTI chip compatibility with Mac
> > > Date: January 5, 2018 at 16:41:00 CST
> > > To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com> mailto:n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com> >, US Support <us.support at ftdichip.com
> <mailto:us.support at ftdichip.com> mailto:us.support at ftdichip.com
> <mailto:us.support at ftdichip.com> >
> > >
> > > Tipton:
> > >
> > > FTDI does not support iOS.
> > >
> > >
> > > Best Regards,
> > >
> > > Cameron Forbes
> > > Customer Support Engineer
> > >
> > > Future Technology Devices International Limited
> > > 7130 SW Fir Loop
> > > Tigard, OR 97223-8160
> > > Tel: 503.726.5415 <tel:%28503%29%20726-5415>
> > > Fax: 503.547.0987 <tel:%28503%29%20547-0987>
> > >
> > >
> > > -----Original Message-----
> > > From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com]
> > > Sent: Tuesday, January 02, 2018 8:37 AM
> > > To: US Support
> > > Subject: FDTI chip compatibility with Mac
> > >
> > > My question has to do with the FTDI chipset and Apple
> computers. I have a MacBook Pro with iOS High Sierra version
> 10.13.2 installed.
> > > Is your chipset compatible with that iOS?
> > > Thank you.
> > >
> > > Tipton Klamberg
> > > Mascoutah, Il 62258
> > > (618) 670-1502 <tel:%28618%29%20670-1502>
> > >
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17
> <http://www.ftdichip.com/FT-X.htm?utm_source=EmailfooterApril17&utm_medium=EmailfooterApril17&utm_campaign=EmailfooterApril17&utm_term=EmailfooterApril17&utm_content=EmailfooterApril17>
> >
> > > Registered in Scotland No 136640
> > > This message contains confidential information and is
> intended only for the individual named. If you are not the named
> addressee you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately by e-mail if you have
> received this e-mail by mistake and delete this e-mail from your
> system. E-mail transmission cannot be guaranteed to be secure or
> error-free as information could be intercepted, lost, destroyed,
> arrive late or incomplete. The sender therefore does not accept
> liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future
> Technology Devices International Ltd has taken every reasonable
> precaution to ensure that any attachment to this e-mail has been
> swept for viruses. However, we cannot accept liability for any
> damage sustained as a result of software viruses and would advise
> that you carry out your own virus checks before opening any
> attachment.
> > >
> > > >
> >
>
>
>
>
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to Nigel Gunn, W8IFF at
> nigel at ngunn.net <mailto:nigel at ngunn.net>
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA.
> tel +1 937 825 5032 <tel:%28937%29%20825-5032>
> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail
> nigel at ngunn.net <mailto:nigel at ngunn.net> www http://www.ngunn.net
> <http://www.ngunn.net>
> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club
> International #385,
> Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/4bb61c0d/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/4bb61c0d/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 5 Jan 2018 17:46:11 -0600
> From: Aubrey Turner <aubrey.c.turner at gmail.com
> <mailto:aubrey.c.turner at gmail.com>>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>
> <CADBLnP4jVpwuVJfZPsjdVrEBtzf1DNhXyhqA0MYf6R=nj+x6CA at mail.gmail.com
> <mailto:nj%2Bx6CA at mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
>
> Unfortunately, he answered the wrong question. Mac uses macOS
> (formerly
> known as OS X), not iOS. IOS is for the iPhone and iPad.
>
> Here's the page that has the driver from FTDI:
> http://www.ftdichip.com/Drivers/VCP.htm
> <http://www.ftdichip.com/Drivers/VCP.htm>
>
>
>
>
> On Jan 5, 2018 5:31 PM, "T.E. Klamberg Klamberg via chirp_users" <
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>> wrote:
>
> Here is the answer I got from FTDI regarding their cable chipsets!
> Let me ask again: how many of you are Mac iOS users, and where did
> you get
> your cloning cables from?
> THanks.
> Tip N9MVX
>
> Begin forwarded message:
>
> *From: *Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>>
> *Subject: **RE: FDTI chip compatibility with Mac*
> *Date: *January 5, 2018 at 16:41:00 CST
> *To: *"T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, US Support <
> us.support at ftdichip.com <mailto:us.support at ftdichip.com>>
>
> Tipton:
>
> FTDI does not support iOS.
>
>
> Best Regards,
>
> Cameron Forbes
> Customer Support Engineer
>
> Future Technology Devices International Limited
> 7130 SW Fir Loop
> Tigard, OR 97223-8160
> Tel: 503.726.5415 <tel:%28503%29%20726-5415> <(503)%20726-5415>
> Fax: 503.547.0987 <tel:%28503%29%20547-0987> <(503)%20547-0987>
>
>
> -----Original Message-----
> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com> <n9mvx at yahoo.com <mailto:n9mvx at yahoo.com>>]
> Sent: Tuesday, January 02, 2018 8:37 AM
> To: US Support
> Subject: FDTI chip compatibility with Mac
>
> My question has to do with the FTDI chipset and Apple computers. I
> have a
> MacBook Pro with iOS High Sierra version 10.13.2 installed.
> Is your chipset compatible with that iOS?
> Thank you.
>
> Tipton Klamberg
> Mascoutah, Il 62258
> (618) 670-1502 <tel:%28618%29%20670-1502>
> [FT-X]<http://www.ftdichip.com/FT-X.htm?utm_source=
> <http://www.ftdichip.com/FT-X.htm?utm_source=>
> EmailfooterApril17&utm_medium=EmailfooterApril17&utm_
> campaign=EmailfooterApril17&utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17>
> Registered in Scotland No 136640
> This message contains confidential information and is intended
> only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and
> delete this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be
> intercepted,
> lost, destroyed, arrive late or incomplete. The sender therefore
> does not
> accept liability for any errors or omissions in the contents of this
> message, which arise as a result of e-mail transmission. Future
> Technology
> Devices International Ltd has taken every reasonable precaution to
> ensure
> that any attachment to this e-mail has been swept for viruses.
> However, we
> cannot accept liability for any damage sustained as a result of
> software
> viruses and would advise that you carry out your own virus checks
> before
> opening any attachment.
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> This message was sent to Aubrey Turner at
> aubrey.c.turner at gmail.com <mailto:aubrey.c.turner at gmail.com>
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com <http://intrepid.danplanet.com>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/c2d2b7a3/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/c2d2b7a3/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 6 Jan 2018 03:09:07 +0000 (UTC)
> From: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>
> Subject: Re: [chirp_users] Fwd: FDTI chip compatibility with Mac
> To: Aubrey Turner <aubrey.c.turner at gmail.com
> <mailto:aubrey.c.turner at gmail.com>>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID: <698213000.1355860.1515208147367 at mail.yahoo.com
> <mailto:698213000.1355860.1515208147367 at mail.yahoo.com>>
> Content-Type: text/plain; charset="utf-8"
>
> I see clearly where the mistake was made...by me. I?m the one that
> used ?iOS? instead of just ?Mac OS?. I learned something today. So
> I will order the cables I need for my two Yaesus, download CHIRP
> to my MacBook Pro and go on from there. Thanks to all for your
> assistance.
> Tip, N9MVX
>
>
> Sent from Yahoo Mail for iPhone
>
>
> On Friday, January 5, 2018, 17:46, Aubrey Turner
> <aubrey.c.turner at gmail.com <mailto:aubrey.c.turner at gmail.com>> wrote:
>
> Unfortunately, he answered the wrong question. Mac uses macOS
> (formerly known as OS X), not iOS. IOS is for the iPhone and iPad.?
> Here's the page that has the driver from
> FTDI:http://www.ftdichip.com/Drivers/VCP.htm
> <http://www.ftdichip.com/Drivers/VCP.htm>
>
>
>
>
> On Jan 5, 2018 5:31 PM, "T.E. Klamberg Klamberg via chirp_users"
> <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>> wrote:
>
> Here is the answer I got from FTDI regarding their cable
> chipsets!Let me ask again: how many of you are Mac iOS users, and
> where did you get your cloning cables from?THanks.Tip N9MVX
>
>
> Begin forwarded message:
> From: Cameron Forbes <cameron.forbes at ftdichip.com
> <mailto:cameron.forbes at ftdichip.com>>
> Subject: RE: FDTI chip compatibility with Mac
> Date: January 5, 2018 at 16:41:00 CST
> To: "T.E. Klamberg Klamberg" <n9mvx at yahoo.com
> <mailto:n9mvx at yahoo.com>>, US Support <us.support at ftdichip.com
> <mailto:us.support at ftdichip.com>>
>
> Tipton:
>
> FTDI does not support iOS.
>
>
> Best Regards,
>
> Cameron Forbes
> Customer Support Engineer
>
> Future Technology Devices International Limited
> 7130 SW Fir Loop
> Tigard, OR 97223-8160
> Tel: ??503.726.5415 <tel:%28503%29%20726-5415>
> Fax: ?503.547.0987 <tel:%28503%29%20547-0987>
>
>
> -----Original Message-----
> From: T.E. Klamberg Klamberg [mailto:n9mvx at yahoo.com]
> Sent: Tuesday, January 02, 2018 8:37 AM
> To: US Support
> Subject: FDTI chip compatibility with Mac
>
> My question has to do with the FTDI chipset and Apple computers. I
> have a MacBook Pro with iOS High Sierra version 10.13.2 installed.
> Is your chipset compatible with that iOS?
> Thank you.
>
> Tipton Klamberg
> Mascoutah, Il 62258
> (618) 670-1502 <tel:%28618%29%20670-1502>
> [FT-X]<http://www.ftdichip. com/FT-X.htm?utm_source=
> EmailfooterApril17&utm_medium= EmailfooterApril17&utm_
> campaign=EmailfooterApril17& utm_term=EmailfooterApril17&
> utm_content=EmailfooterApril17 >
> Registered in Scotland No 136640
> This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee
> you should not disseminate, distribute or copy this e-mail. Please
> notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system. E-mail
> transmission cannot be guaranteed to be secure or error-free as
> information could be intercepted, lost, destroyed, arrive late or
> incomplete. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message, which arise
> as a result of e-mail transmission. Future Technology Devices
> International Ltd has taken every reasonable precaution to ensure
> that any attachment to this e-mail has been swept for viruses.
> However, we cannot accept liability for any damage sustained as a
> result of software viruses and would advise that you carry out
> your own virus checks before opening any attachment.
>
>
>
> ______________________________ _________________
> chirp_users mailing list
> chirp_users at intrepid. danplanet.com <http://danplanet.com>
> http://intrepid.danplanet.com/ mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at
> aubrey.c.turner at gmail.com <mailto:aubrey.c.turner at gmail.com>
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com <http://intrepid.danplanet.com>
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180106/68bdc349/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180106/68bdc349/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 5 Jan 2018 23:01:37 -0500
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net <mailto:n1ea at arrl.net>>
> Subject: [chirp_users] Wouxun KG-UV8E KG-UV8T KG-UV8D Plus
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>
> <CADO5Rbj+uo=diLj5h8zhXaPm+tFQYBqNL_uGM5B-P-usRU37ww at mail.gmail.com
> <mailto:diLj5h8zhXaPm%2BtFQYBqNL_uGM5B-P-usRU37ww at mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
>
> To all who have been following the work on Wouxun KG-UV8E issue #3943.
>
> I uploaded a debug log and I wasn't expecting my username and
> password to
> be in plain text, so the entire issue had to be deleted. (Thanks Dan)
>
> The project is moved:
> Wouxun KG-UV8E KG-UV8T KG-UV8D Plus
> <https://chirp.danplanet.com/issues/5481
> <https://chirp.danplanet.com/issues/5481>>
>
> https://chirp.danplanet.com/issues/5481
> <https://chirp.danplanet.com/issues/5481>
>
> 73
> David N1EA
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/d198ec37/attachment-0001.html
> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180105/d198ec37/attachment-0001.html>
>
>
> ------------------------------
>
> Message: 8
> Date: Sat, 6 Jan 2018 12:46:46 -0600
> From: Tom Consodine ND5Y <nd5y at yahoo.com <mailto:nd5y at yahoo.com>>
> Subject: [chirp_users] Linux PPA problem?
> To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> Message-ID: <3aec84c7-5b3e-19fe-cedf-8620a0036639 at yahoo.com
> <mailto:3aec84c7-5b3e-19fe-cedf-8620a0036639 at yahoo.com>>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I'm using Ubuntu linux here and a couple days ago I got the new daily
> build available e-mail notice but I never got the new version when
> I did
> a system upgrade.
>
> Today I looked at the Chirp Launchpad PPA page and it shows the
> latest
> chirp-daily is 20180104 but then it says "5 packages waiting to
> build".
>
> Is the PPA broken or something?
>
> --
> Tom ND5Y
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
> End of chirp_users Digest, Vol 109, Issue 6
> *******************************************
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> This message was sent to W5NNH at kemkerj3 at gmail.com
> <mailto:kemkerj3 at gmail.com>
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
>
>
> --
> --John E Kemker III
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Johnson ve3id at nw.johnson at ieee.org
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
Please consider the environment when deciding if you really need to print this message
Please call for free repetition of doubtful words
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180106/bea0dcca/attachment.html
More information about the chirp_users
mailing list