[chirp_users] TYT DMR Radios

[Chuck Hast]

Yep that is what it is. And of course why it does not come up in the /dev.

Am testing the editcp program out now.

On Mon, Jan 1, 2018 at 7:48 PM, David Ranch <chirp at trinnet.net> wrote:

>
> Per http://www.linux-usb.org/usb.ids , this seems like 0483:df11 is:
>
>    0483  STMicroelectronics
>       df11  STM Device in DFU Mode
>
>
> That's NOT a serial port.
>
> --David
> KI6ZHD
>
>
> On 01/01/2018 04:59 PM, Chuck Hast wrote:
>
> The TYT dongle is not a serial device, here is the syslog dump I get when
> I
> plug the TYT dongle with radio connected.
>
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.369938] usb 1-1.1: new
> full-speed USB device number 9 using ehci-pci
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469746] usb 1-1.1: New USB
> device found, idVendor=0483, idProduct=df11
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469756] usb 1-1.1: New USB
> device strings: Mfr=1, Product=2, SerialNumber=3
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469762] usb 1-1.1: Product:
> Patched MD380
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469767] usb 1-1.1:
> Manufacturer: @00000008 : ffffffff
> Jan  1 18:55:42 kp4djt-t420 kernel: [  535.469771] usb 1-1.1:
> SerialNumber: 00000000010C
> Jan  1 18:55:42 kp4djt-t420 mtp-probe: checking bus 1, device 9:
> "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
> Jan  1 18:55:42 kp4djt-t420 mtp-probe: bus: 1, device: 9 was not an MTP
> device
>
> The DMRTOOLS talk to it just fine, now to figure out how to get it to talk
> to the
> radio from wine. Also the device does not appear in /dev unlike serial
> devices.
>
>
>
> On Mon, Jan 1, 2018 at 1:08 PM, Nigel Johnson <nw.johnson at ieee.org> wrote:
>
>> If you are having trouble getting USB serial working in wine under linux,
>> try this post:
>>
>> https://www.downtowndougbrown.com/2013/03/getting-x-ctu-in-w
>> ine-to-detect-your-serial-ports/
>>
>> I do a lot of micro controller programming and debugging using serial
>> interfaces and I have used it to get several different things working
>>
>> 73 de NIgel ve3id
>>
>>
>>
>> On 01/01/18 13:39, Chuck Hast wrote:
>>
>> Yes, we all use DMRTools on the MD-380 and similar, but still have to
>> fall back
>> on the stinking TYT software to actually generate the code plug, sure
>> would
>> like to be able to use one piece of software to do it. The TYT software
>> runs
>> under wine but it cannot see the dongle as wine does not appear to be able
>> to handle USB devices so you have to make it a two step process as far as
>> I
>> can see.
>>
>> Yes we will need to find someone who can take on the Chirp work, as it is
>> more
>> than just a bit trivial to add the DMR stuff, but maybe someone will
>> emerge.
>> There are a lot of MD-380 people out there who would like to be able to
>> use
>> Chirp for the radio maybe one is a coder and will step forward.
>>
>>
>>
>> On Mon, Jan 1, 2018 at 11:57 AM, Silverfox <alan.r.hill at gmail.com> wrote:
>>
>>> Why do you need it.  There is already excellent freeware software that
>>> allows you to program them.
>>> Happy New Year.  73's
>>> Alan - W6ARH
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: chirp_users-bounces at intrepid.danplanet.com
>>> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Neil
>>> Stone
>>> Sent: Monday, January 1, 2018 2:00 AM
>>> To: chirp_users at intrepid.danplanet.com
>>> Subject: [chirp_users] TYT DMR Radios
>>>
>>> Good morning and happy new year all,
>>>
>>> I was wondering if there were any plans to add functionality to chirp to
>>> support the TYT DMR radios, such as their MD-2017 (...so last year) or
>>> MD-380 for example?
>>>
>>> That's all for now, 73
>>>
>>> Neil (M6LPI)
>>>
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chuck Hast at kp4djt at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180101/4ce05a5d/attachment.html