[chirp_users] Trouble with iOS 10.13.3

[Scott Brady]

Thanks for the info. I did indeed make sure the volume was all the way up,
and I assume that if the cable has the Baufeng logo on it, then it must be
genuine. Could you tell me what cable you use?

Thanks,

SCOTT
AC7OD

On Thu, Feb 22, 2018 at 6:30 PM, Charley Bratton <charley at bratton.net>
wrote:

> Hi Scott,
>
> I use a Mac regularly to run CHIRP.  However, unless your cable is a
> _real_ FTDI cable, you are likely going to run into driver issues.  MacOS
> includes drivers for FTDI.  No additional driver downloads necessary.
> (Also check that the volume on your HT is loud and K-plug is firmly
> seated).  One of my Baofengs required a little pocket knife work on the
> moulded K-plug before it would fully seat.
>
> /CB
> KE4QBW
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Scott at utahkarate at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180222/692e1160/attachment.html