[chirp_users] VFO

[Rich Holtman]

I recommend that you study the wonderful web site "www.miklor.com".  Much
information available there, answers to many questions.  Given the steps
that must be taken to enter the VFO mode, it seems like there is no need to
disable VFO, as one cannot just "accidentally" get into the VFO mode.  If
you concentrate on programming the repeaters you desire to use, there is
likely little or no need to disable VFO.

Good luck and 73,

Rich, KD9ANU


On Thu, Feb 1, 2018 at 2:05 PM, K Lavinder via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> OK, I'm like Phil on Dusk Dynasty; "A low tech man in a high tech world".
> On a UV5R, how do I go about swapping the VFO limits so that the VFO is
> disabled?
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Richard Holtman at rich.holtman at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180201/6bd34b48/attachment.html